Lewmar H2GD windlass 12v 8MM (5/16) Anchoring & Docking

The latest generation of Lewmar's "H Series" horizontal windlasses, the H2 and H3 windlasses are designed for boats from 9 m (30 feet) to 15 m (50 feet).

The contactor is integrated into the bridge. unit. This saves valuable installation time because it reduces the number of components in the system. Additionally, the contactor is protected.

This has now been combined with a sleek, discreet design that takes up the minimum amount of valuable front deck area.

The electro-polished stainless steel rod management system will handle both rope and chain. Dual steering operation gives full control when ascending and descending.

Kits include: Integrated dual direction contactor, circuit breaker, toggle switch and sprocket/drum for 5/16" G4 chain and 9/16-5/8" line

Quick and easy one-piece installation
Maximum pull of 1433 lbs
Motor-reRobust horizontal worm gearbox for reliable performance
Integrated contactor protected by main housing while saving installation time
Sealed weatherproof unit requires minimal maintenance
Main housing in aluminum and composite for reduced weight.
Stainless steel warping drum with unique "Wear and Abrasion Reduction Pattern" finish

What size windlass would fit best fit your boat?
If you have a 10 m (33 ft) boat, a 270 kg (600 lb) pull windlass will generally be selected. The rule for checking your windlass selection is to add the total weight of the chain and the weight of the anchor. The rope is very light and does not affect the actual lifting performance of the windlass, but can be taken into account. For safe navigation in all types of conditions and maritime areas, Lewmar offers youorder to multiply the total weight of your anchor and chain by 4. This number should be less than the maximum pull of the windlass you have selected. If your results are equal to or greater than the maximum pull, select the next largest windlass. The windlass does not store the anchor rod in the locker. Gravity stores the bike in the locker. There should be a free and unobstructed area under the hawsehole for the incoming traveler to lie down on; otherwise, the rod will get stuck. Your windlass is a recovery device; the windlass picks up the anchor and sets off. A windlass is not a high load carrying device. When at anchor, your boat should be secured to a cleat or other mooring point on the bow.

The stylish Lewmar Series Horizontal Windlass uses reliable technology worm gearbox. The integrated contactor simplifies wiring and is protected by a main housing.durable pal. The waterproof seal on this device requires minimal maintenance. The polished stainless steel ride's electrical management system will manage both ropes and chains, while the manual retrieval module means the anchor can be retrieved even in the event of a power outage. Two-way operation can simultaneously perform up and down control.
PRODUCT ID: 1002091
SKU: NVN-1002091
CSKU: CWR-1002091
REWRITE: 1013202-lewmar-h2gd-windlass-12v-8mm-5-16
MPN: 69600537
br> UPC: 743683324734
ASIN: B000SMWX32
WSKU: LEW69600537
SSKU:
NAME: Lewmar H2GD Windlass 12v 8MM (5/16)
PTITRE: Lewmar H2GD Windlass 12v 8MM (5/ 16)
TYPE: Anchoring and mooring -> Anchoring accessories
SELLER: Lewmar
Lewmar H2GD Windlass 12V 8mm (5/16)

Gtags:

GSpecs:

Lewmar H2GD 12v 8MM windlass (5/16) Product description

The latest generation of Lewmar's "H Series" horizontal windlass, the H2 and H3 windlass are designed for boats from 9 m (30 feet) to 15 m ( 50 feet).

The contactor is integrated into the bridge unit. This saves valuable installation time because it reduces the number of components in the system. Additionally, the contactor is protected.

This has now been combined with a sleek, discreet design that takes up the minimum amount of valuable front deck area.

The electro-polished stainless steel rod management system will handle both rope and chain. Dual steering operation gives full control when ascending and descending.

Kits include: Integrated dual direction contactor, circuit breaker, toggle switch and sprocket/drum for 5/16" G4 chain and 9/16-5/8" line

Quick and easy 1-piece installation
Maximum pull of 1433 lbs
Heavy-duty horizontal worm gear motor for reliable performance
Built-in contactor protected by main housing while saving operating time installation
Sealed waterproof unit requires minimal maintenance
Aluminum and composite main housing for reduced weight.
Stainless steel warping drum with unique "Wear and Abrasion Reduction Pattern" finish

What size windlass would fit best fit your boat?
If you have a 10 m (33 ft) boat, a 270 kg (600 lb) pull windlass will generally be selected. The rule for checking your windlass selection is to add the total weight of the chain and the weight of the anchor. The rope is very light and does not affect the actual lifting performance of the windlass, but can be taken into account. For safe navigation in alls types of conditions and sea areas, Lewmar recommends multiplying the total weight of your anchor and chain by 4. This number should be less than the maximum pull of the windlass you have selected. If your results are equal to or greater than the maximum pull, select the next largest windlass. The windlass does not store the anchor in the trunk. Gravity stores the bike in the locker. There should be a free and unobstructed area under the hawsehole for the incoming traveler to lie down on; otherwise, the rod will get stuck. Your windlass is a recovery device; the windlass picks up the anchor and sets off. A windlass is not a high load carrying device. When at anchor, your boat should be secured to a cleat or other mooring point on the bow.

The stylish Lewmar Series Horizontal Windlass uses reliable technology worm gearbox. The integrated contactor simplifieswiring and is protected by a durable main enclosure. The waterproof seal on this device requires minimal maintenance. The polished stainless steel ride's electrical management system will manage both ropes and chains, while the manual retrieval module means the anchor can be retrieved even in the event of a power outage. Two-way operation can simultaneously perform up and down control.

Frequently Asked Questions (FAQ) about the Lewmar H2GD 12v 8MM (5/16) windlass Who is the Lewmar?
How to describe the Lewmar H2GD 12v 8MM (5/16) windlass?
What are the strong points of the Lewmar H2GD Windlass 12v 8MM (5/16)?
Lewmar H2GD Windlass 12v 8MM (5/16) additional information?
Who is the Lewmar? Since 1946, Lewmar has strived to make time on the water as easy and stress-free as possible; design and manufacture innovative and reliable products of the highest quality. Witha range of hardware, winches, hydraulic systems, windlasses, anchors, thrusters, steering systems, hatches and portholes suitable for every boat, from the smallest day fisherman to the largest mega-yacht, Lewmar can provide a complete solution whatever your project and requirements. How to describe the Lewmar H2GD 12v 8MM windlass (5/16)? The stylish Lewmar series horizontal windlass uses reliable worm gearbox technology. The integrated contactor simplifies wiring and is protected by a durable main housing. The waterproof seal on this device requires minimal maintenance. The polished stainless steel ride's electrical management system will manage both ropes and chains, while the manual retrieval module means the anchor can be retrieved even in the event of a power outage. Bidirectional operation allows simultaneous up and down control.

TheH2 and H3 windlasses are designed for boats from 9m to 15m.
The contactor is integrated into the deck unit. This saves valuable installation time as it reduces the amount of wire required.
Its intuitive design means it is easy to use, with simple push-button operation.

The latest generation windlasses from Lewmar, designed for boats from 9 m (30 feet) to 15 m (50 feet).
The contactor is integrated into the bridge unit. This saves valuable installation time as it reduces the need for additional wiring.
H2 and H3 windlasses are suitable for a variety of applications including sailing, cruising and fishing.
li>

The Lewmar H2GD 12v windlass is the latest generation of the H series, designed for boats from 9 m (30 feet) to 15 m (50 feet). The contactor is an integral part of the bridge unit, saving invaluable installation. This windlass has a galvanized finish for added corrosion resistance and durability.

What are the highlights of the Lewmar H2GD 12v 8MM (5/16) windlass?

The H2 and H3 windlasses are designed for boats from 9m to 15m.
The contactor is integrated into the deck block. This saves valuable installation time as it reduces the amount of wire required.
Its intuitive design means it is easy to use, with simple push-button operation.
The latest generation windlasses from Lewmar, designed for boats from 9 m (30 feet) to 15 m (50 feet).
The contactor is an integral part of the deck unit. This saves valuable installation time as it reduces the need for additional wiring.
The H2 and H3 windlasses are suitable for a variety of applications including racing, cruising and fishing.
The H2 and H3 windlasses are designed toboats from 9m (30ft) to 15m (50ft), making them perfect for most vessels.
They are powered by the latest generation of 'H Series' horizontal windlasses from Lewmar, designed to be compact and lightweight for easy installation.
The contactor is integrated into the bridge unit, saving valuable installation time.
The latest generation of Lewmar windlasses.
The contactor is integrated into the deck unit, saving installation time.
Designed for boats from 9m to 15m.

Lewmar H2GD 12v 8MM windlass (5/16) additional information? Buy now Lewmar H2GD 12v windlass

The Lewmar H2GD windlass is the latest generation of horizontal windlass from Lewmar's H series, the H2 and H3 windlass are designed for boats from 9m (30ft) to 15m (50ft) ).

Buy now Lewmar H2GD 12v Windlass

Lewmar is the leading manufacturerndial of windlasses, winches and related equipment for boats.

Learn more Lewmar Windlasses

Lewmar windlasses are designed to be reliable and durable for all types of boats.

Buy now Get 12v windlass

Lewmar H2GD Windlass 12v is the latest generation of Lewmar windlass designed for boats from 9 m (30 ft) to 15 m (50 ft).

Buy the Lewmar windlass now

Lewmar is the leading manufacturer of windlass in the world. This windlass is perfect for your boat.

The most powerful windlass for boats from 9 to 15 meters

Lewmar is the world's leading windlass manufacturer and we are proud to present our new product. This windlass is perfect for boats up to 15 meters and it has a sleek new design that will look great on your boat.

The latest generation of windlass from Lewmar

The H2GD 12v windlass from Lewmar is the latest windlass technology. Contactors are an integral part of the unitdecking, saving valuable space on your patio. The H2GD is perfect for boats from 9 m (30 ft) to 15 m (50 ft).

The latest in windlass technology

The H2GD windlass from Lewmar is the latest in windlass technology. The contactor is an integral part of the bridge unit, so you don't have to worry about it breaking. The H2GD windlass has a gear ratio of 5.5:1, meaning it can handle the toughest jobs with ease.

The latest windlass technology

Lewmar H2GD Windlass 12v is the latest generation of windlasses for boats up to 50 feet. . Featuring a built-in contactor, this windlass will make your boat's deck clean and tidy. The H2GD is available in 12 V or 24 V.

Lewmar H2GD 12 V windlass

Lewmar is a leading manufacturer of marine equipment and accessories. The Lewmar H2GD windlass is the latest generation of horizontal windlass from Lewmar, designed for boatsfrom 9m to 15m. The contactor is integrated into the bridge unit, making it easy to install. Get your Lewmar

Save $829 when you purchase the Lewmar H2GD 12v 8MM Windlass (5/16)for only $2,299from NVN Marine! Free same day delivery before 3 p.m. Lewmar H2GD 12v 8MM windlass (5/16) Technical specifications

Type:	Anchoring and mooring \| Anchoring accessories
Supplier:	Lewmar
Weight:	20.0 lb

Lewmar H2GD 12v 8MM Windlass (5/16) Reviews Lewmar H2GD Windlass 12v 8MM (5/16) Shipping & Returns

Shipping Weight:	20.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic Feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes
Delivery by truck:	Yes

For detailed shipping terms please see our shipping policy and you can find our returns and refund policy here.