Load Rite 6600 lb Disc Brake Actuator - Tie Down Engineering Model Bestsellers

6,600 lb Disc Brake Actuator - Tie Down Engineering Model

Model 660E operates by the "push" or "push" of the trailer towards the towing vehicle. This automatically synchronizes the trailer brakes with the towing vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes and applies force to the master cylinder, providing hydraulic pressure to the brakes. The integrated damping damper delays the telescopic impact against the hitch ball. Be sure to follow the brake regulations in your state. Brake laws are sometimes minimum standards, and you may want to add additional brakes to a trailer.

Read the tow vehicle's owner's manual for towing capacity and other towing recommendations before installing brakes or this actuator. The actModel 660E ioner comes fully assembled and ready to bolt, if not already installed. Made for tongue sizes: 3"x 3", 3"x 4" and 3"x 5".

Features:

6,600 lbs.
Fits a 2" hitch ball
For use with disc brakes

Maximum hitch capacity actuator:

Gross load: 6,600 lb.
Maximum tongue load: 650 lb.

The actual in-service rating is limited to that of the lowest rated ball and hitch or component of the tow vehicle or trailer used, or the trailer manufacturer's GVWR. indicated on the certification label, whichever is lower (note: GVWR is the gross vehicle weight rating, which includes the trailer and load weight as the total gross weight).

PRODUCT ID: 101880
SKU: NVN-101880
CSKU: CWR-101880
REWRITE: 112991-load-rite-6-600lb-disc-brake-actuator
MPN: 6080.45
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: LOAD RITE ACTUATOR 6.6K
NAME_EX:
br>PTITLE: Load Rite 6,600 lb Disc Brake Actuator – Tie Down Engineering Model
TYPE: Towing | Bearings & Hubs
VENDOR: Load Rite
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> VEHICLE STORAGE & CARGO> MOTOR VEHICLE TRAILERS> BOAT TRAILERS

Gtags:

GSpecs:

Load Rite 6,600 lb Disc Brake Actuator – Tie Down Engineering Model Product Description

6,600 lb Disc Brake Actuator – Tie Down Engineering Model

The 660E model operates by "surge" or "push" the trailer toward the towing vehicle. This automatically synchronizes the trailer brakes with the towing vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes and applies force to the master cylinder, providing hydraulic pressure to the brakes. The integrated damping damper delays the telescopic impact against the hitch ball. Be sure to follow the brake regulations in your state. Brake laws are sometimes minimum standards, and you may want to add additional brakes to a trailer.

Read the tow vehicle's owner's manual for towing capacityge and other towing recommendations before installing the brakes or this actuator. The Model 660E actuator comes fully assembled and ready to bolt on, if not already installed. Made for tongue sizes: 3"x 3", 3"x 4" and 3"x 5".

Features:

6,600 lbs.
Fits a 2" hitch ball
For use with disc brakes

Maximum hitch capacity actuator:

Gross load: 6,600 lb.
Maximum tongue load: 650 lb.

Save $206 when you purchase the Load Rite 6,600 lb Disc Brake Actuator - Engineered Model tie-downfor only $293 at NVN Marine! Same day dispatch before 3 p.m. Load Rite 6,600 lb Disc Brake Actuator - Tie Down Engineering Model Technical Specifications

Type:	Trailer \| Bearings and Hubs
Supplier:	Load Rite
Weight:	20.6 lbs

Load Rite 6,600 lb Disc Brake Actuator – Tie Down Engineering Model User ReviewsLoad Rite 6,600 lb Disc Brake Actuator – Tie Down Engineering Model Shipping & Returns

Shipping Weight:	20.6 lbs
Box sizes:	(h) x ( l) x (l)
Cubic feet:	0

For a detailed shipping policy, please see our shipping policy and you can find our returns and refund policy here.