Maretron CLM100 Current Loop Monitor Marine Navigation & Instruments

Maretron's CLM100 converts commercially available 4-20 mA current loop transducers into digital data so that a wide variety of information can be displayed on compatible NMEA 2000 displays. Many 4-20 mA current loop transducers are supported by the CLM100, including transducers for monitoring DC voltage and current, flow, distance, linear speed and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load). cells), pressure, decibels and rotation rate.

Some typical applications where the CLM100 is used with commercially available 4-20 mA transducers include machine monitoring using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors and furnace gearboxesprovides early warning of potential problems, leading to fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is shaft speed monitoring. A commercially available 4-20 mA rot national speed sensor is coupled to the shaft of interest and the CLM100 converts the transducer data into an RPM that can be read by a compatible NMEA 2000 display. And if you are concerned about the force exerted on a shroud or perhaps a vessel towing attachment point, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and load corresponding display monitored using one of Maretron's display products. The CLM100 is NMEA 2000 certified, so you can view all information anywhere on the vessel using a compatible NMEA 2000 display. The CLM100 is a key element of the monitoring and control systemof Maretron N2KView vessels.

* The CLM100 requires configuration. (Maretron DSM150, DSM250, USB100 or IPG100 required for setup)

CLM100 Current Loop Monitor

The Maretron CLM100 converts current Commercially available 4-20 mA digital data loop transducers so that a wide variety of information can be displayed on Maretron displays. Many 4-20mA current loop transducers are supported by the CLM100, including transducers for monitoring DC voltage and current, flow, distance, linear speed and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load cell). , pressure, decibels and rotation rate. Some typical applications in which the CLM100 is used with commercially available 4-20 mA transducers includemonitoring of machines using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors and gearboxes provides early warning of potential problems, leading to fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is shaft speed monitoring.

A commercially available 4-20 mA rotation rate transducer is coupled to the shaft of interest and The CLM100 converts the transducer data into a RPM that can be read on a compatible device. NMEA 2000 display. And if you are worried about the force exerted on a mast shroud or perhaps a ship towing attachment point, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and the corresponding load monitored using one of the
display products ofMaretron.

Features:

Used with commercially available 4-20 mA current loop transducers
Converts analog transducer data to digital data (NMEA 2000)
Digital data displayed on Maretron screens

This product can expose you to chemicals known to the State of California as causing cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Portable Party Speaker, MFG#. PBX-811SM, with 8-inch speaker, LED lighting, tripod, wireless microphone, built-in battery with AC adapter, USB and AUX input, bass and treble...
PRODUITID: 58325
SKU: NVN -58325
CSKU: CWR-58325
REWRITE: 69436-maretron-clm100-current-loop-monitor
MPN: CLM100-01
UPC: 873804003665
br> ASIN: B0170WCVAW
WSKU: MARCLM10001
SSKU: MRTN-CLM100-01
KSKU: MRTCLM10001
GSKU: CLM100-01
MSKU:
LSKU:
NAME: Maretron CLM100 Current Loop Monitor
EX_NAME: MARETRON CLM100-01 CURRENT LOOP MONITOR
PTITRE: Monitor of current loop Maretron CLM100
TYPE: Navigation and maritime instruments | NMEA Cables and Sensors
SUPPLIER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Personal Computer
Maretron CLM100-01 Current Loop Monitor
Maretron CLM100 Current Loop Monitor
Personal Computer
Gtags:

GSpecs:

Maretron CLM100 Current Loop Monitor Product Description

The Maretron CLM100 converts commercially available 4-20 mA current loop transducers into digital data so that a wide variety of information can be displayed on displays NMEA 2000 compatible. Many 4-20 mA current loop transducers are supported by the CLM100, including transducers for monitoring DC voltage and current, flow, distance, linear speed and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load). cells), pressure, decibels and rotation rate.

Some typical applications where the CLM100 is used with commercially available 4-20 mA transducers include machine monitoring using accelerometers and vibration sensors. Monitoring vibrations of pumps, motorsEngines, fans, compressors and gearboxes provide early warning of potential problems, resulting in fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is rear speed monitoring. A commercially available 4-20 mA rotational speed sensor is coupled to the shaft of interest and the CLM100 converts the transducer data into an RPM that can be read by a compatible NMEA 2000 display. And if you are concerned about the force exerted on a shroud or perhaps a vessel towing attachment point, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and load corresponding display monitored using one of Maretron's display products. The CLM100 is NMEA 2000 certified, so you can view all information anywhere on the vessel using a compatible NMEA 2000 display. The CLM100 is uA key part of Maretron's N2KView vessel monitoring and control system.

* The CLM100 requires configuration. (Maretron DSM150, DSM250, USB100 or IPG100 required for setup)

CLM100 Current Loop Monitor

The Maretron CLM100 converts current 4-20 mA commercially available loop transducers in digital data, therefore a wide variety of information information can be displayed on Maretron screens. Many 4-20 mA current loop transducers are supported by the CLM100, including transducers for monitoring DC voltage and current, flow, distance, linear speed and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load). cell), pressure, decibels and rotation rate. Some typical applications in which the CLM100 is usedinstalled with commercially available 4-20 mA transducers include machine monitoring using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors and gearboxes provides early warning of potential problems, leading to fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is shaft speed monitoring.

A commercially available 4-20 mA rotation rate transducer is coupled to the shaft of interest and The CLM100 converts transducer data into a RPM that can be read on a compatible NMEA 2000 display. And if you are concerned about the force exerted on a shroud or perhaps a vessel towing attachment point, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and load correspondent monitored atthe help of one of the
Maretron. display products.

Features:

Used with commercially available 4-20 mA current loop transducers
Converts analog signals. transducer data to digital data (NMEA 2000)
Digital data displayed on Maretron displays

This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Portable Party Speaker, MFG#PBX-811SM, with 8-inch Speaker, LED Lighting, tripod, wireless microphone, built-in battery with AC adapter, USB and AUX input, bass and treble...

Maretron CLM100 Current Loop Monitor Related ProductsMaretron Micro Tee
Maretron Double Ended Microphone Cord -0.5 M
Maretron Micro Double Ended Cord - 1 meter
Maretron Micro Double Ended Cord - 3 M
Maretron Micro Double Ended Cord - 6 meters
Maretron Micro Cord double ended - 2 meters
Maretron Double ended micro cord 5 meters
Maretron pressure transducer 0 to 3 PSI
Maretron pressure transducer 0 to 5 PSI

Frequently Asked Questions (FAQ) about the Maretron CLM100 Current Loop Monitor Who is Maretron?
How to Describe the Maretron CLM100 Current Loop Monitor?
What is the exterior color of the product?
In which country is this product manufactured?
What are the dimensions and weight of the Maretron CLM100 current loop monitor?
What is the type connector of the product?
What is the communication method of the product?
What are the manufacturer's notes on Maretron CLM100 Current Wolves Monitor?
Who is the Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world. How to describe the Maretron CLM100 Current Loop Monitor?

Maretron's CLM100 converts commercially available 4-20 mA current loop transducers into digital data so that a wide variety of information can be displayed on compatible NMEA 2000 displays . Many 4-20 mA current loop transducers are supported by the CLM100, including transducers for monitoring DC voltage and current, flow, distance, speedand linear acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load). cells), rennet, decibels and rotation rates.

Some typical applications in which the CLM100 is used with commercially available 4-20 mA transducers include machine monitoring using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors and gearboxes provides early warning of potential problems, leading to fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is shaft speed monitoring. A commercially available 4-20 mA RPM sensor is coupled to the shaft of interest and the CLM100 converts the transducer data into an RPM that can be read by a NMEA 2000 comp display.atible. And if you are concerned about the force exerted on a shroud or perhaps a vessel towing attachment point, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and load corresponding monitored using one of the Maretron. ; display products. The CLM100 is NMEA 2000 certified so you can view all information anywhere on the vessel using a compatible NMEA 2000 display. The CLM100 is a key component of Maretron's N2KView vessel monitoring and control system.

* The CLM100 requires configuration. (Maretron DSM150, DSM250, USB100 or IPG100 required for configuration)

What is the exterior color of the product? Black

Maretron's CLM100 converts commercially available 4-20 mA current loop transducers into digital data so that a wide variety of information can be displayed on compatible NMEA 2000 displays . Many 4-20mA current loop transducers are supported by the CLM100 includedDing Transducers to monitor DC voltage and current, flow, distance, linear velocity and acceleration, angle, angular velocity and acceleration, temperature, humidity, resistance, strain gauges, force (load cells), pressure, decibels and rotation rate. /p>

Some typical applications where the CLM100 is used with available 4-20 mA transducersCommercial ones include machine monitoring using accelerometers and vibration sensors. Vibration monitoring of pumps, motors, fans, compressors and gearboxes provides early warning of potential problems, leading to fewer breakdowns and reduced maintenance expenses. Another example application using the CLM100 is shaft speed monitoring. A commercially available 4-20 mA rotational speed sensor is coupled to the shaft of interest and the CLM100 converts the transducer data into an RPM that can be read by a compatible NMEA 2000 display. And if you are concerned about the force exerted on a shroud or perhaps a vessel towing accessory, commercially available clevis pins with a 4-20 mA interface can be connected to the CLM100 and the corresponding load monitored at using one of the Maretron display products.The CLM100 is NMEA 2000 certified, so you can view all information anywhere on the vessel using a compatible NMEA 2000 display. The CLM100 is a key component of Maretron's N2KView vessel monitoring and control system.

* The CLM100 requires configuration. (Maretron DSM150, DSM250, USB100 or IPG100 required for setup)

$65

Maretron CLM100 Current Loop Monitor

$354

Type:	Marine Navigation & Instruments \| NMEA Cables and Sensors
Supplier:	Maretron
Weight:	1.2 lbs
User Guide:	Download PDF
Brochure product:	Download PDF
Product installation:	Download PDF

Shipping Weight:	1.2 lbs
Box Sizes:	4.00 (h) x 7.00 (w) x 10.00 (w)
Cubic feet:	280.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms , please see our Shipping Policy and you can find our Return and Refund Policy here.