Maretron Fuel Flow Sensor – 25-500 LPH/6.6-132 GPH Marine Navigation & Instruments
As fluid passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device .
Maretron M2AR Attributes
Fuel Flow Sensor - 25-500 LPH/6.6- 132 GPH
Features:
- Operating Temperature: -40°C to 80°C (-40°F to 176° F)
- Storage temperature: -65°C to 170°C (-85°F to 338°F)
- Port size: 1/ 4" NPT female
- Cable length: 1 M (3.28 ft)
- Maximum viscosity: 1000 cPs
- Pressure: 68.95 bar (1000 PSI)
- Filter Size: 200 mesh (if not already installed after wirefuel tank)
This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information,
Maretron M2AR Fuel Flow Sensor 25 to 500 LPH 6.6 to 132 GPH Model: M2AR UPC: 873804003535 Used with Maretron FFM100 Fuel Flow Meter Specifications Operating Temperature -40C to 80C -40F to 176F Storage Temperature -65C to 170C -85F to 338F Port Size 1/4 inch NPT Internal Thread Accuracy Percentage Reading 0.25 Enter the percentage with k factor on sensor in ffm100, maximum viscosity is 1000 cps, maximum working pressure is 68.95 bar 1000 psi, filter size 200 mesh (if fuel is used) Before installation, the length of the filter cable is 1 m 3). 28 feet 1.66 pounds size 2.91 inches x 2.80 inchesx 1.91 inches
Flow range (per hour):
- 25 to 500 LPH (6.60 to 132 GPH)
PRODUCT ID : 56247
SKU: NVN-56247
CSKU: CWR-56247
REWRITE: 67358-maretron-fuel-flow-sensor-25-500-lph-6-6- 132
MPN: M2AR
UPC: 873804003535
ASIN: B00UH1B1T6
WSKU: MARM2AR
SSKU: MRTN-M2AR
KSKU: MRTM2AR
GSKU: M2AR
MSKU:
LSKU:
NAME: Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH
NAME_EX: MARETRON FUEL FLOW SENSOR 25 TO 500 LPH (6.6 TO 132 GPH)
PTITLE: Flow Sensor Maretron Fuel Tank - 25-500 LPH/6.6-132 GPH
br>TYPE: Marine Navigation & Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS
Office Product
Maretron Fuel Flow Sensor - 25 -500 LPH/6.6 -132 GPH
Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH
Categorye Amazon: Office Product
Gtags:
GSpecs:
Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH Product Description
As fluid passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device .
Maretron M2AR Attributes
Fuel Flow Sensor - 25- 500 LPH/6.6-132 GPH
Features:
- Operating Temperature: -40°C to 80°C ( -40°F to 176°F)
- Storage temperature: -65°C to 170°C (-85°F to 338°F)
- Port Size: 1/4" NPT Female
- Cable Length: 1M (3.28ft)
- Maximum Viscosity: 1000 cPs
- Pressure: 68.95 bar (1000 PSI)
- Strainer Size: 200 mesh (if not already installed after fuel filter)
This product can expose you to chemicals including NICKEL (METALLIC), which is known to the State of California to cause cancer. For more information,
Maretron M2AR Fuel Flow Sensor 25 to 500 LPH 6.6 to 132 GPH Model: M2AR UPC: 873804003535 Used with Maretron FFM100 Fuel Flow Meter Specifications Operating Temperature -40C to 80C -40F to 176F Storage Temperature -65C to 170C -85F to 338F Port Size 1/4 inch NPT Internal Thread Accuracy Percentage Reading 0.25 Enter the percentage with k factor on sensor in ffm100, maximum viscosity is 1000 cps, maximum working pressure is 68.95 bar 1000 psi, filter size 200 mesh (if fuel is used) Before installation, the length of the filter cable is 1 m 3). 28 feet 1.66 pounds size 2.91 inches x 2.80 inches x 1.91 inches
Flow range (per hour):
- 25 to 500 LPH (6.60 to 132 GPH)
Frequently Asked Questions (FAQ) about marsEtron Fuel Flow Sensor - 25-500 LPH/6.6 -132 GPH Who is the Maretron?
How to describe the Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH?
What is the exterior color of the product?
In which country is this product manufactured?
What is the Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH, Package Dimensions and Weight?
What is the connector type of the product?
What is the cable length?
What is the communication method of the product?
What are the manufacturer's notes on the flow sensor Maretron fuel - 25-500 LPH/6.6-132 GPH?
Who is Maretron? Maretron products,GPS receivers and transducers are designed to withstand the harshest marine conditions. Maretron carefully protects all of our electronic devices, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are perfectong the best in the world.How to describe the Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH?
As fluid passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device .
What is the colorexterior of the product? Black- In which country is this product made? AustraliaWhat is Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH, Package Dimensions and Weight? 4 (l) X 4 (h) X 6 (w) inches and the weight is: 1.29 lbs. What is the connector type of the product? Bare wireHow long is the cable? 1 m (3.3')What is the product communication method? AnalogWhat are the manufacturer's ratings for the Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH?
When the gripped passes through the sensor, the internal rotors rotate. The magnets located in the rotors will pass through the sensors on the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow calculations based on the pulses received.
*Note: Two fuel flow sensors and one FFM100 fuel flow monitor are required per monitored device .
EconomSave $78when you purchase the Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPHfor only $467from NVN Marine! Same day dispatch before 3 p.m. Maretron Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH Technical Specifications
| Type: | Navigation & Marine Instruments | NMEA Cables and Sensors |
|---|---|
| Supplier: | Maretron |
| Weight: | 1.4 lbs |
| Product installation: | Download PDF |
| Shipping Weight: | 1.4 lbs |
|---|---|
| Box sizes: | 4.00 (h) x 4.00 (w) x 6.00 (w) |
| Cubic feet: | 96.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
