Sale!
Maretron Pressure Transducer 0 to 5 PSI
Maretron Pressure Transducer 0 to 5 PSI
Maretron Pressure Transducer 0 to 5 PSI

Maretron Pressure Transducer 0 to 5 PSI

$62

SKU: Maretron Pressure Transducer 0 to 5 PSI
Category:

Maretron Pressure Transducer 0 to 5 PSI Marine Navigation & Instruments

Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network

Attributes of the Maretron PT05PSI01 Pressure Transducer 0 to 5 PSI - for FPM100 fluid pressure monitor

This product can expose you to chemicals, including NICKEL (METALLIC), recognized by the State of California may cause cancer. For more information,



0 to 5 PSI Pressure Sensor for FPM100 Fluid Pressure Monitor Warning: This product can expose you to substances chemicals, including nickel alloys (METALLIC).

Compatible fluids/gases:


  • Refrigerant
  • Engine oil
  • Diesel
  • Hydraulic fluid
  • Brake fluid
  • Water
  • Waste water
  • Hydrogen
  • Nitrogen
  • Air


Operating temperature:


  • -5°C to 60°C


Substrate temperature:


  • -25°C to 125°C


Maximum overpressure:


  • 29 PSI (2 bar)


Construction:


  • 1.4305 (303 stainless steel), thick layer on Al2O3 ceramic sensor (96%), FKM 70 Sh O-ring


Cable:


  • IP67, PVC (PA6-3 cable gland)


Cable length:


  • 4.9 feet (1.5 m)


Vibration:


  • 4 g (10 – 2000 Hz)


Shock :


  • 50g/8ms


EMC Compatibility:


  • EN 61000-6-3
  • EN 61000- 6-2


Maximum humidity:


  • 95% relative


Weight:


  • 110g

PRODUCT ID: 40841
SKU: NVN-40841
CSKU: CWR-40841
REWRITE: 51952-maretron-pression-transducer-0-to-5-psi
MPN: PT-0-5PSI-01
UPC: 873804002910
br>ASIN: B00K3S3WYA
WSKU: MARPT05PSI01
SSKU: MRTN- PT-0-5PSI-01
KSKU: MRTPT05PSI01
GSKU: PT-0-5PSI-01
MSKU:
LSKU:
NAME: Maretron 0 to 5 PSI Pressure Transducer
NAME_EX: MARETRON PRESSURE TRANSDUCER 0 TO 5 PSI
PTITLE: Maretron Pressure Transducer 0 to 5 PSI
TYPE: Marine Navigation & Instruments | NMEA Cables and Sensors
SELLER: Maretron
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS


Maretron Pressure Transducer 0 at 5 PSI

Gtags:

GSpecs:

Maretron 0 to 5 PSI Pressure Transducer Product Description Maretron Fluid Pressure Sensor Transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network

Maretron PT05PSI01 Attributes
0 to 5 PSI Pressure Transducer - for FPM100 Fluid Pressure Monitor

This product may expose yourself to chemicals, including NICKEL (METALLIC) which is known to the State of California to be a carcinogen. For more information,



0 to 5 PSI Pressure Sensor for FPM100 Fluid Pressure Monitor Warning: This product can expose you to substances chemicals, including nickel alloys (METALLIC).

Compatible fluids/gases:


  • Refrigerant
  • Engine oil
  • Diesel
  • Hydraulic fluid
  • Hydraulic fluide brake
  • Water
  • Waste water
  • Hydrogen
  • Nitrogen
  • Air


Operationg Temperature:


  • -5°C to 60°C


Media temperature:


  • -25°C to 125°C


Maximum overpressure:


  • 29 PSI (2 bar)


Construction:


  • 1.4305 (303 stainless steel), thick layer on Al2O3 ceramic sensor (96%), FKM 70 Sh O- Ring


Cable:


  • IP67, PVC (PA6-3 cable gland)


Cable length:


  • 4.9 feet (1.5 m)


Vibration:


  • 4g (10 – 2000 Hz)


Shock:


  • 50 g/8 ms


EMC compatibility:


  • EN 61000 -6-3
  • EN 61000-6-2


Humiditymaximum:


  • 95% relative


Weight:


  • 110g


Frequently Asked Questions (FAQ) About Maretron 0 to 0 Pressure Transducer 5 PSI Who is the Maretron?
How to describe the Maretron 0 to 5 PSI pressure transducer?
What is the exterior color of the product?
In which country is this product Product manufactured in?
/> What are the dimensions and weight of the Maretron 0 to 5 PSI pressure transducer?
What is the connector type of the product?
What is the cable length?
What is the method of product communication?
What are the manufacturer's notes on the Maretron 0 to 5 PSI pressure transducer?
Who is the Maretron? Maretron products, from GPS receivers to transducers, are designed to withstand the harshest marine conditions. Maretron carefully protects all our electronic deviceses, even equipment below deck, in waterproof enclosures to ensure years of reliable performance. Superior engineering, maximum precision, consistent reliability: three reasons why Maretron products are among the best in the world.scribe Maretron Pressure Transmitter 0 to 5 PSI? The Maretron fluid pressure sensor transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network. What is the exterior color of the product? Silver
      In which country is this product made? ChinaWhat are the dimensions and weight of the Maretron 0 to 5 PSI pressure transducer? 7 (l) X 1 (h) X 7 (w) inches and the weight is: 0.45 lbs. What is the connector type of the product? Bare wireHow long is the cable? 1 m (3.3')What is the product communication method? AnalogWhat are the manufacturer's notes regarding the p transducerMaretron pressure 0 to 5 PSI? The Maretronfluid pressure sensor transducers work with the MaretronFMP100 which will adapt up to six pressure transducers to the NMEA 2000 network

      Save $33when you purchase the Maretron 0 to 5 PSI Pressure Transducerfor only $155at NVN Marine! Same day dispatch before around 3 p.m. Maretron Pressure Transducer 0 to 5 PSI Technical Specifications
      Type:

      Marine Navigation & Instruments | NMEA Cables and Sensors
      Supplier:

      Maretron
      Weight:

      0.1 lbs
      Product manual:

      Download PDF
      Product installation:

      Download PDF
      Maretron Pressure Transducer 0 to 5 PSI User Reviews Maretron Pressure Transducer 0 to 5 PSII Shipping & Returns
      Shipping Weight:

      0.1 lbs
      Box sizes:

      1.00 (h) x 4.00 (w) x 4.00 (w)
      Cubic feet:

      16.0
      Returnable:

      Yes
      USPS First Class:

      Yes
      P65:

      Yes

      For detailed shipping policy, please see our shipping policy 'shipping and you can find our return and refund policy here.

Related products