Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Without Capstan 3/8" Chain 5/8" Rope Anchoring & Docking

HRC 10 Rope/Chain Series Above Deck Horizontal Rope/Chain Windlass Maxwell's all-new HRC10 Horizontal Series represents yet another step forward in performance and excellence in anchor handling. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 meters (52 feet), which require a fully above deck installation system. The HRC10 perfectly handles ropes up to 16mm (5/8") and chains up to 10mm (3/8"), including thick rope-to-chain splicing. The modern appearance of the HRC10 Series retains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. All HRC Series windlasses feature Maxwell's unique wavy design chain plate. This rope/chain wheel breVeted incorporates two unique chain wheels. design concepts that significantly improve the handling and control of spliced rope/chain riding. The outer ribs of the deck are slightly inclined forward ensuring that the rope and chain are well guided into the wheel when retrieving the anchor. As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope. Not only does this corrugated design hold the rope more securely, but it is also gentler on the rope, leading to increased longevity of your anchor.

Maxwell C101012VLP Attributes

Mounting Type: Horizontal, above deck, without capstan
Maximum draw: 1,870 pounds
Maximum line speed : Not provided
Size: 14.6"L x 8.9"W x 7.9"H; Weight: 25 lbs
Chain/Rope Size: 5/16 "; 9/16"-5/8"
Rated voltage: 12 VDC
Motor power: 1200 watts

Maxwell C101012VLP Features and benefits

The above-deck aesthetic design, derived from the philosophy that form follows function, summarizes the The motor and drive are in a two-piece watertight housing, saving space below deck.
The two-piece housing consists of a marine-grade hard-anodized die-cast alloy front section and a rugged, easily removable composite engine cover at the rear. section
This two-piece waterproof housing allows for quick and easy routine maintenance on deck; Simple bolt-on installation ensures quick and effortless installation and setup on deck.
Stainless steel pressure arm exertsalways maximum control pressure on the wire (rope, splice or warp)
The new and revolutionary patented Wave Design chainring is capable of adapting to a wide range of warp pitch differences, in specified chain diameters.
The unique Maxwell "wraparound" horizontal deck ensures that more than 90° of the wheel is used, allowing for greatly improved cable and chain handling compared to competitive designs.
Integrated chain tube and huge through-deck hawse tube throat ensure easy entryCone-type clutch/brake mechanism allows for manual "free fall" anchoring and recovery emergency by cranking the rope and anchor if necessary.
The sealed oil bath and hard anodized marine grade alloy gearbox provide high efficiency output drive via a worm screw and a precision worm wheel
Ga3 year limited warranty

HRC10 horizontal rope chain windlass - 12 V without capstan, 3/8" chain, 5/8" rope

Maxwell's HRC10 represents yet another breakthrough in performance and excellence in anchor handling. The fully automatic horizontal rope/chain windlass has been designed to meet the requirements for use on larger vessels up to 16 meters (52'), which require a fully above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including thick rope to chain splice. The modern appearance of the HRC10 retains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass features Maxwell's unique Wave Design deck . The rope/chain wheel incorporates two unique design concepts that enhance itgreatly reduces the handling and control of the rope/chain spliced wheel. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor.

As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope. Not only does this Wave Design hold the rope more securely, but it is also gentler on the rope, resulting in increased longevity of your anchor.

Features:

Aesthetic above deck design, derived from the philosophy that form follows function, encapsulates the motor and drive. A two-piece watertight enclosure, saving space below deck
The 2-part housing consists of a marine grade hard anodized alloy front section and a robust, easily removable composite engine cover, rear section
2-piece waterproof housing allows for quick and easy routine on-deck maintenance
Simple bolt-on installation ensures quick and effortless on-deck installation and installation
The stainless steel pressure arm always exerts maximum control pressure on the wire (rope, splice or chain)
The Wave Design tray is capable of accommodating a wide range of chain pitch differences, within specified chain size diameters
The unique Maxwell "wraparound" horizontal chainring ensures that more than 90° of the wheel is used, allowing for a string and cable greatly improved. chain handling compared to competitive designs
The HRC10 functionsnne just as effectively with chain rods for those who desire the added security and holding power of a full chain anchor system
The integrated chain pipe and huge throat of the hawse pipe passing through the deck ensures easy entry of the mounted rope/chain in and out of the anchor well
The conical type clutch/brake mechanism allows anchoring manual "free fall" and emergency recovery by cranking the rod and anchor if necessary
=
The sealed oil bath and marine grade hard anodizing, alloy gearbox provides high efficiency output drive via precision worm and worm wheel

Maxwell HRC10 Horizontal Cable Chain Winch -12V without winch, 3/8" chain, 5/8" rope HRC101012VLP. The design of horizontal automatic rope/chain windlass can meet... -Rope chain windlass
MPN : HRC101012VLP
UPC: 9414761104074
ASIN: B009X2W392
WSKU:
SSKU:
KSKU: MXWC101012VLP
GSKU:
MSKU:
LSKU:
NAME: Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Without Capstan, 3/8" Chain, 5/8" Rope
NAME_EX: MAXWELL HRC10 12V HORIZONTAL ROPE CHAIN WINDLASS WITHOUT CAPSTAN
PTITLE: Chain Windlass Maxwell HRC10 horizontal rope - 12 V without capstan, 3/8" chain, 5/8" rope
TYPE: Anchoring and mooring | Windlasses
SELLER: Maxwell
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> MOORING & ANCHORING> ANCHOR WINDLASSES
Sports
Maxwell HRC10 Horizontal Rope Chain Windlass
Maxwell HRC10 Horizontal Rope Chain Windlass - 12V without Capstan, 3/8" Chain, 5/8" Rope [HRC101012VLP]
Sports
Gtags:

G Specs:

Maxwell HRC10 Horizontal Rope/Chain Windlass - 12V Without Capstan, 3/8" Chain, 5/8" Rope Product Description

HRC 10 Rope/Chain Series Horizontal Above Deck Rope/Chain WindlassLa Maxwell's all-new HRC10 Horizontal Series represents yet another advancement in performance and anchor handling excellence. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 meters (52 feet), which require a fully above deck installation system. The HRC10 perfectly handles ropes up to 16mm (5/8") and chains up to 10mm (3/8"), including thick rope-to-chain splicing. The modern appearance of the HRC10 Series retains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors. All the guinThe HRC Series are equipped with Maxwell's unique wavy chainring design. This patented rope/chain wheel incorporates two unique chain wheels. design concepts that significantly improve the handling and control of the rope/chain splice. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor. As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope. Not only does this corrugated design hold the rope more securely, but it is also gentler on the rope, leading to increased longevity of your anchor.

Maxwell C101012VLP Attributes

Type ofmounting: Horizontal, above deck, without capstan
Maximum draw: 1,870 pounds
Maximum line speed: Not reported
Size: 14.6 "L x 8.9" W x 7.9" H; Weight: 25 lbs
Chain/Rope Size: 5/16 "; 9/16"-5/8"
Rated voltage: 12V DC
Motor Power: 1200 Watts

Maxwell C101012VLP Features and Benefits

Aesthetic above-deck design from philosophy where form follows function, encapsulates the motor and drive in a two-piece watertight housing, saving space below deck.
The two-piece housing consists of a section Marine grade hard anodized die-cast alloy front end and a tough, easy to install composite engine covernt removable at the back. section
This two-piece waterproof housing allows for quick and easy routine maintenance on deck; Simple bolt-on installation ensures quick and effortless installation and setup on deck.
Stainless steel pressure arm always exerts maximum control pressure on the wire (rope, splice or chain )
The new and revolutionary patented Wave Design chainring is able to accommodate a wide range of chain pitch differences, within specified chain diameters
The unique Maxwell horizontal chainring "wraparound" ensures that more than 90° of the wheel is used, allowing for greatly improved cable and chain handling compared to competitive designs
Integrated chain tube and huge tube groove hawseholes passing through the deck ensure easy entry of the rope/chain in and out of the anchor well.
The clutch mechanismTapered type age/brake allows for manual "free fall" anchoring and emergency recovery of the rod crank and anchor if necessary
Sealed oil bath and gear box Marine grade hard anodized alloy gears provide high efficiency output drive via precision worm gear and worm wheel
Limited 3 Year Warranty

HRC10 Horizontal Rope Chain Windlass - 12V without capstan, 3/8" chain, 5/8" rope

Maxwell's HRC10 represents yet another breakthrough in terms of performance and excellence in anchor handling. The horizontal, fully automatic rope/chain windlass has been designed to meet the requirements for use on larger vessels up to 16 meters (52'), which require a fully above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including thick rope to chain splice.The modern appearance of the HRC10 maintains the classic aesthetic of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass features Maxwell's unique Wave Design deck . The rope/chain wheel incorporates two unique design concepts that significantly improve the handling and control of the rope/chain spliced wheel. The outer ribs of the deck are angled slightly forward, ensuring that the cable and chain are guided smoothly into the wheel when retrieving the anchor.

As the rope pulls into the wheel, the opposing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a "wave pattern" action that is far superior to the traditional "blocking cleat" way of holding the rope. Not only does this Wave Design hold the rope more securely,but it is also gentler on the rope, resulting in increased longevity of your anchor.

Features:

An aesthetically pleasing design above of the deck, derived from the philosophy that form follows function, encapsulates the motor and drive in a two-piece watertight housing, saving space under the deck
The housing 2-piece construction consists of a marine grade hard anodized die-cast alloy front section and robust, easily removable composite engine cover rear section
The 2-piece waterproof housing allows for maintenance quick and easy routine on deck
Simple bolt-on installation ensures quick and effortless installation and placement on deck
The arm stainless steel pressure plate always exerts maximum control pressure on the rope (rope, splice or chain)
The Wave Design plate is capableable to accommodate a wide range of chain pitch differences, within specified chain size diameters
Unique MaxwThe horizontal "wraparound" chainring ensures that over 90° of the wheel is used, allowing for greatly improved handling of rope and chain compared to competing designs
The HRC10 works just as effectively with all chain rods for those who desire safety and Additional holding power of a chain anchor system
Integrated chain pipe and huge hawse pipe throat running through deck ensures easy rope/chain entry in and out of the anchor locker
The conical type clutch/brake mechanism allows for manual "free fall" anchoring and emergency crank recovery of the rod and anchor anchor if necessary
=
The sealed oil bath and marine grade hard anodized alloy gearbox offrent high efficiency output drive via precision worm and worm wheel

Maxwell HRC10-12V horizontal cable chain winch non winch 3 /8" chain 5/8" rope HRC101012VLP. The design of horizontal automatic rope/chain windlass can meet...

Maxwell HRC10 Horizontal Rope chain windlass - 12V without capstan, 3/8" chain, 5/8" rope Related Products Maxwell P19007 Covered Foot Switch (White)
Maxwell P19001 Foot Switch (Chrome Bezel)
Maxwell P19006 Covered Foot Switch (Black)
Maxwell Remote Up/Down Control
Tool Chain Maxwell AA560 rope or all chain chain counter - Black
Maxwell AA150 chain and rope counter
Maxwell SS anchor swivel shackle - 10-12 mm - 1500 kg
Maxwell wireless remote control with Rode meter
Maxwell 8" emergency crank for RC and Freedom Series windlasses
Maxw high/low foot switchell - Compact, White

Frequently Asked Questions (FAQ) about Maxwell HRC10 Horizontal Rope Chain Windlass - 12V without Capstan, 3/8" Chain, 5/8" Rope Who is the Maxwell?
How to describe the Maxwell HRC10 - 12 V horizontal rope chain windlass No capstan, 3/8" chain, 5/8" rope?
What is the rope diameter of the product?
What is the size?
What is the mounting type of the product?
Does it have a free fall function?
What is the diameter of the chain of this product?
Is this product vertical or horizontal?
Who is the Maxwell? For three decades, the Maxwell name has been synonymous with the highest performance standards in anchoring solutions for superyachts, pleasure boats and commercial vessels. Our international reputation for excellence has evolved through continuous research and development, innovative design, customer service and a commitment toe style and quality unprecedented in the industry. How to describe the Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Chain without Capstan 3/8" , 5/8" Rope? Maxwell HRC10-12V horizontal cable chain winch without winch 3/8" chain 5/8" rope HRC101012VLP. The design of horizontal rope/chain automatic windlass can meet...

HRC10 Horizontal Rope Chain Windlass
12V without capstan, 3/8" chain, 5" rope /8"
Maxwell's HRC10represents yet another advancement in anchor performance and handling excellence. The fully automatic horizontal rope/chain windlass has been designed to simplify anchoring work.

Horizontal rope/chain windlass HRC10 - 12 V without capstan, chain 3/ 8", 5/8" Rope
Maxwell's HRC10represents yet another breakthrough in performance and anchor handling excellence. The guFully automatic horizontal rope/chain windlass has been designed to be the ultimate in simplicity for the most demanding conditions.
HRC10 Horizontal Rope Chain Windlass - 12V without capstan, 3/8" chain , 5/8 " Rope

Horizontal rope chain windlass HRC10 - 12 V without capstan, 3/8" chain, 5/8" rope
Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to be the ultimate in simplicity and reliability. The HRC10 is the perfect choice for anyone needing a reliable, easy-to-use rope/chain windlass.
The HRC10 features a simple design that is easy to install and use. This eliminates the need for

What is the rope diameter of the product? 5/8"

HRC10 Horizontal Rope Chain Windlass
Chainne 12 V without capstan 3/8", 5/8" rope
Maxwell's HRC10 represents yet another advancement in the performance and excellence of anchor handling. The fully automatic horizontal rope/chain windlass has been designed to simplify anchoring work.
HRC10 Horizontal Rope Chain Windlass - 12V without capstan, 3/8" chain, 5/8" Rope
Maxwell's HRC10 represents a new advancement in performance and excellence in anchor handling. The fully automatic horizontal rope/chain windlass has been designed to be the ultimate in simplicity for the most demanding conditions.
HRC10 Horizontal Rope Chain Windlass - 12V without capstan, 3/8 chain ", 5/8" rope
HRC10 Windlass horizontal rope chain - 12 V chain without capstan 3/8", 5/8" rope
The HRC10 from Maxwell represents yet another another step forward in terms of performance and excellence ine handling of anchors. The horizontal, fully automatic rope/chain windlass has been designed to be the ultimate in simplicity and reliability. The HRC10 is the ideal choice for anyone who needs a reliable, easy-to-use rope/chain windlass.
The HRC10 features a simple design that is easy to install and use. This eliminates the need for a

How big is it? 14.6"L x 8.9"W x 7.9"H; Weight: 25 lbsWhat is the mounting type of the product? Horizontal, above deck, without capstanHas a free fall function? YesWhat is the diameter of the chain of this product? 3/8" Is this product vertical or horizontal?

Save $791 on the purchase of the Maxwell HRC10 horizontal rope chain windlass - 12 V without capstan, 3/8" chain, 5/8 rope "for only $3,167 from NVN Marine! Fast, free same-day delivery before 3 p.m.Maxwell HRC10 horizontal rope chain windlass -12 V without capstan, 3/8" chain, 5/8" rope Technical specifications

Type:	Anchoring and mooring \| Windlasses
Seller:	Maxwell
Weight:	48.2 lbs
Chain - Diameter (inches):	3 /8"
Free fall:	Yes
Rope Diameter (inches):	5/8"
Vertical/Horizontal :	Horizontal
Product brochure:	Download PDF

Maxwell HRC10 Horizontal Rope Chain Windlass - 12V without Capstan, 3/8" Chain, 5/8" Rope User ReviewsMaxwell Horizontal Rope Chain Windlass HRC10 - 12 V without capstan 3/8" Chapoues, 5/8" rope Shipping and returns

Shipping weight:	48, 2 lb
Box sizes:	12.00 (h) x 17.00 (w) x 20.00 (w)
Cubic feet:	4080.0
Returnable:	Yes