Megaware SkegGuard 27121 Stainless Steel Replacement Skeg Boat Outfitting

SkegGuard 27121 Replacement Stainless Steel

Model Guide

Evinrude - 60 2017 HO 65-75 2 stroke 2013-present 90-115-130 Shaft 20" 2 stroke 2006-present
Johnson - 65 -75 2 stroke 2013-present 90-115-130 Shaft 20" 2 stroke 2006-present

Inexpensive solution to a broken spoiler - Save hundreds of dollars on repairs and fin replacement

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality 316 marine grade stainless steel that incorporates an extra reinforced wear tab on the bottom where the fin is most vulnerable.

This plateThe 3mm thickened bottom will resist damage or abrasion. hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little only 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror Polished Marine Grade 316Stainless Steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation
Drain hole prevents corrosion and freezing
Will not compromise not performance
li>
Do-it-yourself installation in less than 10 minutes
Install with as little as 2 to 3 inches of fin remaining

Megaware SkegGuard is made from high quality 316 marine grade stainless steel. At the bottom is the uppermost bottom of the fin, with additional reinforcing wear plates.
PRODUCT ID: 72246
SKU: NVN-72246
CSKU: CWR-72246
REWRITE: 83357-megaware-skegguard-27121-stainless-steel-replacement-skeg
MPN: 27121
br> UPC: 672057271216
ASIN: B07K4ZTSKF
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: Megaware SkegGuard 27121 Stainless Steel Replacement Skeg
NAME_EX: MEGAWARE SKEGGUARD 27121 SS EVINRUDE JOHNSON
PTITRE: Megaware SkegGuard Stainless Steel Replacement Skeg 27121
TYPE: Boat equipment | Hull Protection
SELLER: Megaware
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Megaware SkegGuard - Stainless Steel - Evinrude 60 2017 HO 65-75 2 stroke 2013-present 90-115-130 Shaft 20" 2 stroke 2006-present Johnson 65-75 2 Str

Gtags:

GSpecs:

Megaware SkegGuard 27121 Stainless Steel Replacement Skeg Product Description

SkegGuard 27121 Stainless Steel Replacement Skeg

Model Guide

Evinrude - 60 2017 HO 65-75 2 stroke 2013-present 90-115-130 Shaft 20" 2 stroke 2006-present
Johnson - 65-75 2-stroke 2013-present 90-115-130 20" shaft 2-stroke 2006-present

Inexpensive solution to a Broken Fin - Save Hundreds of Dollars on Skeg Repairs and Replacement

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel that incorporates a safety tabExtra reinforced wear on the bottom, where the wing is most vulnerable.

This 3m thickened bottom plate will resist damage or abrasion caused by hidden rocks and debris or by accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little only 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in models to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period three years from the date of purchase. Please retain receipt as proof of purchase. Hase date.

Features:

Mirror polished marine grade 316 stainless steel
Thickened bottom wear tab protects against ramp. Glides and is ideal for river running
Drain hole prevents corrosion and freezing
Does not compromise performance
Do-it-yourself installation even in less than 10 minutes
Installs with as little as 2 to 3 inches of fin remaining

Megaware SkegGuard is made from 316 stainless steel high quality marine grade. At the bottom is the uppermost bottom of the fin, with additional reinforcing wear plates.

Frequently asked questions (FAQ) about Megaware SkegGuard 27121 Stainless Steel Replacement Stem Who is Megaware?
How to describe Megaware SkegGuard 27121 Stainless Steel Steel Replacement Skeg?
What color is the Megaware SkegGuard 27121 Stainless Steel Replacement Skeg?
Who is Megaware? Megaware developed theDustry created the first do-it-yourself keel protector in 1992 and has been providing boat owners with the highest quality of protection ever since, including hull protection, protection fins and such. With its commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a global provider of smaller fishing boats to the largest coast guard fleets.How to describe steel replacement Skegr stainless Megaware SkegGuard 27121? Megaware SkegGuard is made from high quality marine grade 316 stainless steel. At the bottom is the highest bottom of the pallet, with additional reinforcing wear plates. What color is the Megaware SkegGuard 27121 Stainless Steel Replacement Paddle? Stainless Steel

Save $19 when you purchase the Megaware SkegGuard 27121 Stainless Steel Replacement Skeg for only $95 from NVN Marine! Same day dispatch before 3 p.m. MegVideos of SkegGuard 27121 Stainless Steel Replacement Skeg Megaware SkegGuard 27121 Stainless Steel Replacement Skeg Technical Specifications

Type:	Boat Equipment \| Shell protection
Supplier:	Megaware
Weight:	1.45 lbs
Color:	Stainless steel
Product brochure:	Download PDF
Installing the product:	Download PDF

Megaware SkegGuard 27121 Stainless Steel Replacement Skeg User Reviews Megaware SkegGuard 27121 Stainless Steel Replacement Skeg Shipping & Returns

Shipping Weight:	1.45 lbs
Box sizes:	1.00 (h) x 9.00 (w) x 20.00 (w)
Cubic feet:	180.0
Returnable:	Yes