Megaware SkegGuard 27291 Stainless Steel Replacement Skeg Boat Outfitting

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be installed with as little as 2 inches of fin remaining. The Megaware SkegGuard can make youe save hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27291 Attributes Megawear Keelguard 27291 Features and Benefits

Mirror polished finish
Thickened bottom wear tab Protects against ramp slippage and is ideal for river operation.
Drainage hole prevents corrosion and freezing
Does not compromise the performance

Do-it-yourself Skeg protection installation

Gmodel guide

Yamaha- 115-130 2 and 4 stroke 2003 to present

Inexpensive solution to a broken fin - Save hundreds of dollars on fin repairs and replacement

Megaware SkegGuard provides the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality 316 marine grade stainless steel that incorporates an extra reinforced wear tab on the bottom where the fin is most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion. hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard fits over your lower unit to ensure there are nono noticeable drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with a common tool in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little only 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of purchase date.

Features:

Mirror polished marine grade 316 stainless steel
Thickened Bottom wear tab protects against ramp slippage and is ideal for river operation .
Drain hole prevents corrosion and freezing
Does not compromise performance
Do it yourself Install in less than 10 minutes
Installs with as little as 2 to 3 inches of fin remaining

Megaware SkegGuard is made of high quality 316 marine grade stainless steel. At the bottom is the more finned part and the bottom is equipped with an additional reinforced wear plate.
PRODUCT ID: 72257
SKU: NVN-72257
CSKU: CWR-72257
REWRITE: 83368 -megaware-skegguard-27291-stainless-steel-replacement-skeg
MPN: 27291
UPC: 672057272916
ASIN: B00AJVNNKE
WSKU:
SSKU: KEE-27291
KSKU: KEE27291
GSKU:
MSKU:
LSKU: 254-27291
NAME: Steel Replacement Skeg istainless steel Megaware SkegGuard 27291
NAME_EX: MEGAWARE SKEGGUARD 27291 SS YAMAHA
PTITLE: Megaware SkegGuard 27291 Stainless Steel Replacement Fin
TYPE: Boat Equipment | Hull Protection
SELLER: Megaware
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

MEGAWARE KEELGUARD SkegGuard 27291 YAMAHA: 75- 90HP 4 Stroke 2017-present / 115-130HP 2 and 4 stroke 2001-present
Megaware 27291 SkegGuard Skeg Protector

Gtags:

GSpecs:

Megaware SkegGuard 27291 Stainless Steel Replacement Skeg Product Description

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be iinstalled with as little as 2 inches of fin remaining. The Megaware SkegGuard can save you hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27291 Attributes Megawear Keelguard 27291 Features and Benefits

Mirror polished finish
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation
Drain hole prevents corrosion and freezing
Don'tmwill not promise performance
Do-it-yourself Skeg Guard in less than 10 minutes
Installs with as little as 2-3 inches of Skeg remaining

Megaware SkegGuard 27291 Stainless Steel Replacement Fin

Model Guide

Yamaha - 115-130 2 and 4 stroke 2003 to present

Inexpensive solution to a broken spoiler - Save hundreds of dollars on fender repairs and replacement

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality 316 marine grade stainless steel that incorporates an extra reinforced wear tab on the bottom where the finn is the most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion. hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from accumulating and remaining stagnant.

SecurFeaturing self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little only 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in custom models.ed to virtually all fins.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation.
Drain hole prevents corrosion and freezing
Doesn't compromise performance
Do it yourself Installs all in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

Megaware SkegGuard is made of high quality marine grade 316. stainless steel. At the bottom is the most finned part and the bottom is equipped with an additional reinforced wear plate.

Frequently asked questions (FAQ) about the stemMegaware SkegGuard 27291 Stainless Steel Replacement Rod Who is Megaware?
How to describe the Megaware SkegGuard 27291 Stainless Steel Replacement Rod?
What is it? the weight of the product?
What is the color of the Megaware SkegGuard 27291 stainless steel replacement rod?
Who is Megaware? Megaware developed the industry's first do-it-yourself keel protector in 1992 and has been providing boat owners with the highest quality protection, including hull protection, aileron protection and others. Through our commitment to excellence in product development, quality standards, technology and customer support,Megaware KeelGuard has grown rapidly and is recognized as a global provider of smaller fishing boats to the largest coast guard fleets. How to describe the Megaware SkegGuard 27291 Stainless Steel Replacement Fin?Megaware SkegGuard is made from high quality marine grade 316 stainless steel. At the bottom is the most finned part and the bottom is equipped with an additional reinforced wear plate. What is the weight of the product? 2What color is the Megaware SkegGuard 27291 Stainless Steel Replacement Stem? Stainless Steel

Save $19 when you purchase the Megaware SkegGuard 27291 Stainless Steel Replacement Skeg for only $95 b> at NVN Marine! Same day dispatch before 3 p.m. Megaware SkegGuard 27291 Stainless Steel Replacement Fin Videos Megaware SkegGuard 27291 Stainless Steel Replacement Fin Technical Specifications

Type:	Equipment of boat \| Hull Protection
Vendor:	Megaware
Weight:	1.7 lbs
Color:	Inox
Product brochure:	Download PDF
Product Installation:	Download PDF

Megaware SkegGuard 27291 Steel Replacement Skeg Stainless User Reviews Megaware SkegGuard 27291 Stainless Steel Replacement Skeg Shipping & Returns

Shipping Weight:	1.7 lbs
Box sizes:	1.00 (h) x 9.00 (w) x 19.00 (w)
Cubic feet:	171.0
Returnable:	Yes