Megaware SkegGuard 27191 Stainless Steel Replacement Skeg Boat Outfitting

Protect your engine's windage with the most reliable windage protector on the market, the Megaware SkegGuard. Prevent wear and reduce the amount of damage caused to your fin when hitting minor objects, rocks or submerged stumps and debris. The Megaware SkegGuard is an inexpensive solution to replacing or repairing a broken or damaged fin. You can install a SkegGuard on a new or broken fender with as little as 2 to 3 inches of the upper fender remaining. Easily slide the SkegGuard onto the fender, snap it into place and install the mounting hardware. No soldering is necessary. Each kit comes with self-locking mounting hardware and hex wrenches. Save hundreds of dollars in fin repairs and get back on the water in just 10 minutes.

Megawear Keelguard 27191 Attributes

Compatibility: Volvo DP Dual Prop Engine
Color: Silver
Material: Stainless steeldable
Quantity: Single

Megawear Keelguard 27191 Features and Benefits

Mirror Polished Finish
Thickened bottom wear tab protects against boom sliding and is ideal for river running
Drain hole prevents corrosion and freezing
Will not compromise performance
Installation DIY Skeg Guard in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining
3-year limited warranty

Megaware Skeg Stainless Steel Replacement KegGuard 27191

Model Guide

Volvo- DP Dual Prop 1996-2007

Inexpensive solution to a broken spoiler - Save hundreds of dollars on repairs and replacement of the fin

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your drift.be motor and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is built made from high quality 316 marine grade stainless steel. It incorporates an additional reinforced wear tab on the bottom where drift is most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion caused by hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in repairs.potential rations.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation.
Drain hole prevents corrosion and freezing
Does not compromise performance
Do it yourself Installs in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

Megaware SkegGuard is made of high quality marine grade 316. stainless steel. At the bottom is the uppermost bottom of the fin, with additional reinforcing wear plates.
PRODUCT ID: 72252
SKU: NVN-72252
CSKU: CWR-72252
REWRITE : 83363-megaware-skegguard -27191-stainless-steel-replacement-skeg
MPN: 27191
UPC: 672057271919
ASIN: B005BI6AT6
WSKU:
SSKU:
KSKU: KEE27191
GSKU:
MSKU:
LSKU: 254-27191
NAME: Megaware SkegGuard 27191 Stainless Steel Replacement Skeg
NAME_EX: MEGAWARE SKEGGUARD 27191 SS VOLVO
PTITLE: Megaware SkegGuard 27191 Stainless Steel Replacement Skeg
TYPE: Boat Equipment | Hull Protection
SELLER: Megaware
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Automotive Parts & Accessories

Megaware Skegguard 27191 Stainless Steel Replacement Skeg by Hodges Marine
Automotive Parts & Accessories
Gtags:

GSpecs :

Megaware SkegGuard 27191 Stainless Steel Replacement Fin Product Description

Protect your engine's fin with the most reliable fin protector on the market, the Megaware SkegGuard. Prevent wear and reduce the amount of damage caused to your fin when hitting minor objects, rocks or submerged stumps and debris. The Megaware SkegGuard is an inexpensive solution to replacing or repairing a broken or damaged fin. You can install a SkegGuard on a new or broken fender with as little as 2 to 3 inches of the upper fender remaining. Easily slide the SkegGuard onto the fender, snap it into place and install the mounting hardware. No soldering is necessary. Each kit comes with self-locking mounting hardware and hex wrenches. Save hundreds of dollars on fin repairs and get back on the water in just 10 minutes.

Megawear Keelguard 27191 Attributes

Compatibility: Volvo DP twin propeller engine
Color: Silver
Material: Stainless steel
Quantity: Single

Megawear Keelguard 27191 Features and Benefits

Mirror polished finish
Thickened lower wear tab protects against ramp slippage and is ideal for running river
Drain hole prevents corrosion and freezing
Won't compromise performance
Do-it-yourself Skeg Guard installation in less than 10 minutes
Installation in just 2-3 minutes Inch of Skeg remaining
3-year limited warranty

KegGuard 27191 Replacement Stainless Steel Megaware Skeg

Model Guide

Volvo- DP Dual Prop 1996-2007

Inexpensive solution to a Skeg Broken - Save Hundreds of Dollars on Skeg Repairs and Replacement

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your motor fin and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is constructed of high quality 316 marine grade stainless steel that incorporates an additional reinforced wear tab on the bottom where drift is most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion from hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from accumulating and remaining stagnant.

Secured withself-locking material, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little only 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened The lower wear tab protects against ramp slippage and isideal for running rivers.
Drain hole prevents corrosion and freezing
Does not compromise performance
Do it yourself S installs in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

Megaware SkegGuard is made of quality 316 high quality marine. stainless steel. At the bottom is the uppermost bottom of the fin, with additional reinforcing wear plates.

Frequently Asked Questions (FAQ) about the Megaware SkegGuard 27191Cement Skeg Stainless Steel Replica Who is the Megaware?
How to describe the Megaware SkegGuard 27191 Stainless Steel Replacement Skeg?
What is the material of the Megaware SkegGuard 27191 Stainless Steel Replacement Skeg?
What is the weight of the product?
What is the color of the Megaware SkegGuard Stainless Steel Replacement Shaft? 27191?
What is the compatibilityWhat is this product?
Who is Megaware? Megaware developed the industry's first do-it-yourself keel protector in 1992 and has been providing boat owners with the highest quality protection, including hull protection, aileron protection and others. With its commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a global provider of smaller fishing boats to the largest Coast Guard fleets.How to describe Megaware SkegGuard 27191 Stainless Steel Replacement Skeg? Megaware SkegGuL'ard is made of high quality marine grade 316 stainless steel. At the bottom is the highest bottom of the pallet, with additional reinforcing wear plates. What is the material of the Megaware SkegGuard Stainless Steel Replacement Paddle27191? Stainless steel

$19

Megaware SkegGuard 27191 Stainless Steel Replacement Skeg

$95

Type:	Equipment of boat \| Case protection
Supplier:	Megaware
Weight:	1.0 lb
Color:	Stainless steel
Product brochure:	Download PDF
Product installation:	Download PDF

Shipping Weight:	1.0 lbs
Box sizes:	0.00 (h) x 8.00 (w) x 18.00 (w)
Cubic feet:	0.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our policy returns and refunds here.