Megaware SkegGuard 27151 Stainless Steel Replacement Skeg Boat Outfitting

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be installed with as little as 2 inches of fin remaining. The Megaware SkegGuard can make youe save hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27151 Attributes Megawear Keelguard 27151 Features and Benefits

Mirror polished finish
Thickened bottom wear tab Protects against ramp slippage and is ideal for river operation.
Drainage hole prevents corrosion and freezing
Does not compromise the performance
Do-it-yourself Skeg protection installation in less than 10 minutes
Installs with as little as 2 to 3 inches of fin remaining

Megaware SkegGuard 27151 Stainless Steel Replacement Skeg

Model Guide

Mercury- 225-250 EFI 4-stroke 2003-2005,
Yamaha- 115-130-225-250 2-stroke 1984- 1999 150-175 2 and 4-stroke 1984-present 200 2-stroke HPDI 2000-2012 200 4-stroke 2.8L I4 2012-present 350 4-stroke 2007-present I/O Sterndrive All models 1989-1993
Suzuki - 250SS & 300 4-stroke 2006-2011

Inexpensive solution to a broken spoiler - Save hundreds of dollars on repairs and replacement of the fin

Megaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin.

Pprotect your fin with the best protector

The Megaware SkegGuard is constructed of high quality 316 marine grade stainless steel that incorporates an extra reinforced wear tab on the bottom where the fin is the most vulnerable.

This 3mm thickened bottom plate will resist damage or abrasion. from hidden rocks and debris or accidental slide of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.

When replacing an already broken fin, the Megaware SkegGuard can be installedtalled on a lower unit with as little as 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Features:

Mirror Polished 316 Marine Grade Stainless Steel
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation
Drain hole prevents corrosion and freezing
Will not work Compromised performance
Do-it-yourself installation in less than 10 minutes
Install with as little as 2-3 inches of fin remaining

MegaSkegGuard ware is made from high quality 316 marine grade stainless steel. At the bottom is the more finned part and the bottom is equipped with an additional reinforced wear plate.
PRODUCT ID: 72249
SKU: NVN-72249
CSKU: CWR-72249
REWRITE: 83360 -megaware-skegguard-27151-stainless-steel-replacement-skeg
MPN: 27151
UPC: 672057271513
ASIN: B005BI69J2
WSKU:
SSKU: KEE-27151
KSKU: KEE27151
GSKU:
MSKU:
LSKU: 254-27151
NAME: Megaware SkegGuard Stainless Steel Replacement Skeg 27151
NAME_EX: MEGAWARE SKEGGUARD 27151 SS YAMAHA SUZUKI
PTITLE: Megaware SkegGuard 27151 Stainless Steel Replacement Skeg
TYPE: Boat Fitting | Hull Protection
SELLER: Megaware
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
MEGAWARE KEELGUARD SkegGuard 27151 YAMAHA: 150 -175HP 2/4 stroke 1984-present / 200HP 2-stroke HPDI 2000-2012 / 200HP 4-stroke 2.8L I-4 2012-present / 300HP 4-stroke 2007-2009 / 350HP 4-stroke 2007-present - Also I/O Stern Drive 1989-1993
Megaware Skegguard 27151 Stainless Steel Replacement Skeg by Hodges Marine
Automotive Parts & Accessories
Gtags:

GSpecs:

Megaware SkegGuard 27151 Stainless Steel Replacement Skeg Product Description

Megaware SkegGuardMegaware SkegGuard offers the best of both worlds. It will protect and prevent damage to your engine fin and can also be used to repair and replace an already broken fin. The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel. Additionally, it features a reinforced wear tab on the bottom, where the fin is most vulnerable. The thick 3mm bottom plate will resist damage from rocks, debris and sliding on the ramp. The Skeg Guard conforms to your lower unit, ensuring no perceptible drag or compromise in performance. Additionally, a drainage hole prevents water from accumulating and stagnating. Secured with self-locking hardware, installation takes less than 10 minutes. If you are replacing an already broken fin, the Skeg Guard can be iinstalled with as little as 2 inches of fin remaining. The Megaware SkegGuard can save you hundreds of dollars in potential repairs. This will be stronger and much more affordable than welding and replacing a lower fin. Megaware SkegGuard is available in models to fit virtually any fin. Engine models include Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha. Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please retain receipt as proof of date of purchase.

Megawear Keelguard 27151 Attributes Megawear Keelguard 27151 Features and Benefits

Mirror polished finish
Thickened bottom wear tab protects against ramp slippage and is ideal for river operation
Drain hole prevents corrosion and freezing
Don'tmwill not promise performance
Do-it-yourself Skeg Guard in less than 10 minutes
Installs with only 2-3 inches of Skeg remaining

Megaware SkegGuard 27151 Stainless Steel Replacement Segment

Model Guide

Mercury - 225-250 EFI 4 stroke 2003-2005,
Yamaha- 115-130-225-250 2-stroke 1984-1999 150-175 2 and 4-stroke 1984-present 200 2-stroke HPDI 2000-2012 200 4-stroke 2.8L I4 2012-present 350 4-stroke 2007 -present I/O Sterndrive All models 1989-1993
Suzuki - 250SS & 300 4-stroke 2006-2011

Inexpensive Solution to a Broken Fin - Save Hundreds of Dollars on Fin Repairs and Replacement

Megaware SkegGuard provides the best of both worlds. It will protect and prevent damage to your mote's driftur and can also be used to repair and replace an already broken fin.

Protect your fin with the best protector

The Megaware SkegGuard is built in high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab on the bottom where the fin is most vulnerable.

This 3mm thickened bottom plate will resist damage or wear abrasion caused by hidden rocks and debris or accidental sliding of the ramp. The Megaware SkegGuard conforms to your lower unit to ensure there is no perceptible drag or performance compromise. A drainage hole prevents water from pooling and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in repairss potential.

When replacing an already broken fin, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of fin remaining. It will be stronger and much more affordable than welding and replacing a lower fin.

Megaware SkegGuard is available in designs to fit virtually any fin.

Warranty

Megaware guarantees your Megaware SkegGuard for a period of three years from the date of purchase. Please remove a receipt for proof of date of purchase.

Features:

Mirror polished marine grade 316 stainless steel
Thickened lower wear tab protects against ramp slippage and is ideal for river operation.
Drain hole prevents corrosion and freezing
Does not compromise performance
Do-it-yourself installation in less than 10 minutes
Installs with as little as 2 to 3 inches of Skeg remaining

Megaware SkegGuard is made of high quality 316 marine grade stainless steel. steel. At the bottom is the most finned part and the bottom is equipped with an additional reinforced wear plate.

Frequently Asked Questions (FAQ) about Megaware SkegGuard 27151 Stainless Steel Replacement Stem Who is Megaware?
How to describe the Megaware SkegGuard 27151 Stainless Steel Replacement Stem?
br/> What is it? the weight of the product?
What is the color of the Megaware SkegGuard 27151 stainless steel replacement rod?
Who is it Megaware? Megaware developed the industry's first do-it-yourself keel protector in 1992 and has been providing boat owners with the highest quality protection, including hull protection, aileron protection and others. Through its commitment to excellence inproduct development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a global supplier from the smallest fishing boats to the largest guard fleets. ribs.How to describe Skeg Megaware SkegGuard 27151 Stainless Steel Replacement? Megaware SkegGuard is made from high quality marine grade 316 stainless steel. At the bottom is the most finned part and the bottom is equipped with an additional reinforced wear plate. What is the weight of the product? 2What color is the Megaware SkegGuard 27151 Stainless Steel Replacement Stem? Stainless Steel

Save $19 when you purchase the Megaware SkegGuard 27151 Stainless Steel Skeg Replacement for only $95 b> from NVN Marine! Same day dispatch before 3 p.m. Megaware SkegGuard 27151 Stainless Steel Replacement Fin Videos SpecificationMegaware SkegGuard 27151 Stainless Steel Replacement Fin Technical Specifications

Type:	Boat Equipment \| Shell protection
Supplier:	Megaware
Weight:	1.65 lbs
Color:	Stainless steel
Product brochure:	Download PDF
Product Installation:	Download PDF

Megaware SkegGuard 27151 Stainless Steel Replacement Skeg Reviews Megaware SkegGuard 27151 Stainless Steel Replacement Skeg Shipping & Returns

Shipping Weight:	1.65 lbs
Box sizes:	1.00 (h) x 9.00 (w) x 19.00 (w)
Cubic feet:	171.0
Returnable:	Yes