Nauticus ST1610-120 Smart Tabs II Series Trim Tabs 16 X 10 f/23-30' Boats - 6500lbs Max Boat Outfitting

Reference: "Newtonsoft.Json.Linq.JValue" and "Newtonsoft.Json.Linq.JArray". Nauticus ST1610-120 Smart Tabs II Series Trim Tabs 16 for boats - 6,500 lb maximum

IMPROVE THE OVERALL PERFORMANCE OF YOUR BOATS - GUARANTEED!!!

If these trim tabs don't work for you do not offer an exceptional increase in performance, contact us within 30 days of your purchase.

Why buy a set of manually adjusted trim tabs when you can get automatic trim tabs that are 'will automatically adjust and deliver better performance for less money?

Designed for boats 23' to 30' weighing up to 6,500 lbs. The ST 1610 Series is ideal for low profile fiberglass, aluminum and RIB boats with transom widths less than 10 feet (trailable boats). This systemThe heavy-duty boat provides an active suspension system for the boat that increases stability and smoothes the ride even in rough seas. Easier scheduling at slower speeds, increased payload performance, improved tracking and manipulations are available automatically without the need for a driver interface. No switches, no electrical or hydraulic connections and no maintenance. Hop aboard and let's go!

Specially designed for boats between 23' and 30", less than 10' in width and up to 8,500 lbs gross weight. The ST1610 series includes two Nitrogen gas actuators per plate providing increased rear lift and twice the reactive damping, eliminating any instantaneous changes due to variations in water pressure. This fully automatic and active system provides a smooth, undetectable response to boat speed and. to water conditions, creating a more comfortable ride.

Our techRevolutionary trim tab technology is fully automatic, requiring no operator adjustments while underway. Nauticus trim tabs automatically adjust based on how you load and maneuver your boat.

Nitrogen gas actuator provides LIFTING at the rear of the boat. holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator's load rating and trim plate adjustment, which is made at the time of installation.

Reduce the minimum planning speed until at 33%
Faster acceleration
Increase top speed
Provide a more comfortable ride at low speeds
Improve the fuel economy, maneuverability and safety

NO HYDRAULIC SYSTEM - NO ELECTRIC SWITCHES

The trim tabs of the Nauticus are infully automatic and requires no operator adjustments while underway.

Nitrogen gas actuator provides LIFTING at the rear of the boat. holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and trim plate adjustment, which is made at the time of installation. (see installation instructions).

SPEED CONTROL

The Nauticus trim tabs start at a downward angle to maximize lift at low speed. As the boat accelerates, the water pushes up on the trim plates, providing lift at the stern, which minimizes bow rise and allows the boat to plan quickly.

Once the water pressure exceeds the actuator's rated load (maximum lift), the trim plates move to a horizontal position, eliminating any trelder.

BOAT STABILIZERS

Even when cruising, SMART TABS continue to function as shock absorbers. Constant adaptation to sea conditions allows SMART TABS to offer remarkable stability when cornering, crossing waves, cruising and running at maximum speed. No more slipping, porpoises or chine walking.

ONE OF A KIND

The unique system is the only one of its kind in the industry . The internal valve system is truly "smart" in its design to control your boat's performance.

It will reduce the minimum planning speed by 33%

Providing more comfortable sailing at lower speeds

Improve economy, maneuverability and safety

As boat speed increases, water pressure also increases. Once the water pressure exceeds the cylinder's rated load (periodmaximum LIFT), the trim plates begin to move upward until they are horizontal with the bottom of the boat.

The internal valve system dampens the movement of the trim plate trim, which eliminates any minor instant water reactions. pressure differences. Nauticus trim tabs provide a smooth, undetectable response to boat speed, creating a more comfortable ride at low speeds.

INSTALLATION IS SIMPLE

With a power drill, a small drill bit, a Phillips screwdriver, and two wrenches, almost anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.

All mounting hardware, instructions and templates are included.

SMART TABS require NO DRILLING THROUGH THE HULL

Designed for boats 23' to 30' weighing up to 6,500 lbs.es, the ST 1610 series is an ideal choice for thin fiberglass aluminum boats and RIB design boats with a tail width less than 10 feet.

Nauticus ST1610-120 Smart Tabs II Series Trim Tabs 16 diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal Rudder anode R1AL - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" in diameter
Tecnoseal R1MG rudder anode - Magnesium - 1-7/8" diameter
Tecnoseal R2MG rudder anode - Magnesium - 2-13/16" diameter
Tecnoseal rudder anode R3MG - Magnesium -3-3/4" diameter

Frequently asked questions (FAQ) about Nauticus ST1610-120 Smart Tabs II 16 X 10 f/23-30' series trim tabs Boats - 6,500 lbs max Who is the Nauticus?
How to describe Nauticus ST1610-120 Smart TABS II Series Trim Tabs 16 product?
What is the actuator type?
Who is the Nauticus? No hydraulics... No electrical switches The Naaticus trims are fully automatic! and require no operator adjustments while underway Naaticus Smart Tabs function as shock absorbers, providing stability when cornering, riding waves, cruising, racing and. at maximum speeds No more slipping, porpoises or chine walking Find out today!X 10 f/23-30' for boats - 6,500 lbs max? Designed for boats from 23' to 30' weighing up to 6,500 pounds, the ST 1610 Series is an ideal choice for thin fiberglass aluminum boats and RIB design boats with a tail width less than 10 feet. What is the construction of the product? Stainless Steel

$137

Naaticus ST1610-120 Smart Tabs II Series Compensating Tabs 16 X 10 f/23-30' Boats - 6,500 lb max

$212

Boat layout | Clipping tabs

Naaticus

9.5 lbs

Hydraulic

Stainless Steel

Download PDF