Nauticus SX9510-80 Smart Tab SX Composite Trim Tabs 9.5" x 10" - f/18-20' Boat with 150 - 240HP - Black Boat Outfitting

Smart Tab SX 9.5" x 10" Composite Tabs - for 18 to 20' Boats with 150 to 240 HP - Black

IMPROVES PERFORMANCE OVERALL OVERVIEW OF YOUR BOAT - GUARANTEED!!!

If these trim tabs do not offer you an exceptional increase in performance, contact us within 30 days of your purchase.

Why buy a set of manually adjusted trim tabs when you can get automatic trim tabs that will automatically adjust and provide better performance for less money?

The SX Series incorporates all the fully automatic features of our popular SMART TABS, plus the anti-rust and anti-corrosion benefits of molded composite materials. Assembly can be completed in seconds and installation in minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. SMART TABSSX offers unmatched maintenance-free performance and durability in fresh or salt water. The system can be specifically tuned to maximize the performance of any powerboat and TRACKING RIBS have been added to improve maneuverability at higher speeds.

Our revolutionary trim tab technology is fully automatic, requiring no operator adjustments en route. Nauticus trim tabs automatically adjust based on how you load and maneuver your boat.

Nitrogen gas actuator provides LIFT to the rear of the boat by holding the trim plate downward during acceleration. The amount of LIFT is determined by the actuator load rating and trim plate adjustment, which is made at the time of installation.

Reduce the minimum planning speed until 'at 33%
Acceleration plus fast
Increases top speed
Provides a more comfortable ride at low speeds
Improves fuel economy, handling and safety

NO hydraulics - NO ELECTRIC SWITCHES

The trim tabs on the Nauticus are fully automatic and require no operator adjustment while underway .

Nitrogen gas actuator provides LIFT to the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and trim plate adjustment, which is made at the time of installation. (see installation instructions).

SPEED CONTROL

The Nauticus trim tabs start at a downward angle to maximize lift at low speed. As the boat accelerates, water pushes upward onto the trim plates, providedprovides lift at the stern, which minimizes bow rise and allows the boat to plan quickly.

Once the water pressure exceeds the actuator's rated load (maximum lift ) the trim plates move to a horizontal position eliminating any drag.

BOAT STABILIZERS

Even when cruising, SMART TABS continue to function as shock absorbers. Constant adaptation to sea conditions allows SMART TABS to offer remarkable stability when cornering, crossing waves, cruising and running at maximum speed. No more slipping, porpoises or chine walking.

UNIQUE OF ITS KIND

This unique system is the only one of its kind in the industry . The internal valve system is truly "smart" in its design to control your boat's performance.

It will reduce minimum planning speed by 33%

Provide more comfortable sailing at lower speeds

Improve economy, maneuverability and safety

As boat speed increases, water pressure also increases . Once the water pressure exceeds the actuator's rated load (maximum LIFT period), the trim plates begin to move upward until they are horizontal with the bottom of the boat.

The internal valve system dampens the movement of the trim plate, eliminating any instantaneous reaction to minor variations in water pressure. Nauticus trim tabs provide a smooth, undetectable response to boat speed, creating a more comfortable ride at low speeds.

INSTALLATION IS SIMPLE

With a power drill, a small drill bit, a Phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. InstallersProfessionals should be able to install SMART TABS in 30 minutes or less.

All mounting hardware, instructions and templates are included.

SMART TABS do not require NO DRILLING THROUGH THE HULL

The new SX Series not only features the anti-rust and anti-corrosion benefits of molded composite materials, but also incorporates all the automatic functions of our popular smart labels. ...
PRODUCT ID: 33563
SKU: NVN-33563
CSKU: CWR-33563
REWRITE: 44674-nauticus-sx9510-80-smart-tab-sx-composite-trim
MPN: SX9510-80
UPC: 698690951186
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Nauticus SX9510-80 Smart Tab SX Composite Trim Tabs 9.5" x 10" - f/18-20' Boat with 150 - 240HP - Black
NAME_EX: NAUTICUS SX 9.5 WITH 150 - 240 HP
PTITLE: Nauticus SX9510-80 Smart Tab SX Composite Trim Tabs 9.5" x 10" - f/18-20' Boat with 150 - 240HP - Black
TYPE: Boat layout | Trim Tabs
SUPPLIER: Nauticus
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Nauticus SX9510-80 Smart Tab SX Series Trim Tabs
Nauticus Smart Tab SX Series Trim Tab
Sports
Gtags:

GSpecs:

Nauticus SX9510-80 Smart Tab SX 9.5" x 10" Composite Trim Tabs - Boat f/18-20' with 150 - 240HP - Black Product Description

Smart Tab SX 9.5" Composite Trim Tabs x 10" - for 18 to 20 ft boat with 150 to 240 HP - Black

IMPROVES THE OVERALL PERFORMANCE OF YOUR BOAT - GUARANTEED!!!

If these trim tabs do not provide you with an exceptional increase in performance, contact us within 30 days of your purchase.

Why buy a set of trim tabs at manual adjustment while you can get the automatic trim tabs that self-adjust and provide better performance for less money?

The SX series integrates all features fully automatics of our popular SMART TABS, in addition to the anti-rust and anti-corrosion benefits of molded composite materials. Assembly can be completedin seconds and installation in minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. SMART TABS SX offers unmatched performance and maintenance-free durability in fresh or salt water. The system can be specifically tuned to maximize performance. any powerboat, and TRACKING RIBS have been added to improve maneuverability at higher speeds.

Our revolutionary trim tab technology is fully automatic, requiring no trim adjustment. operator while underway Nauticus trim tabs automatically adjust based on how you load and maneuver your boat.

Nitrogen gas actuator provides LIFT to the stern. of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and d setting.e the trim plate, which is done at the time of installation.

Reduce minimum planning speed by up to 33%
Faster acceleration
Increases top speed
Provides a more comfortable ride at low speeds
Improves fuel economy, handling and safety

NO HYDRAULIC - NO ELECTRIC SWITCH

Nauticus compensators are fully automatic requiring no operator adjustments while underway.

The nitrogen gas actuator provides LIFT to the rear of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and trim plate adjustment, which is made at the time of installation. (see installation instructions).

SPEED CONTROL

The Nauticus trim tabs start in adownward angle to maximize lift at low speeds. As the boat accelerates, water pushes up on the trim plates, providing lift to the stern, which minimizes bow rise and allows the boat to plan quickly.

Once the water pressure exceeds the actuator's rated load (maximum lift) the trim plates move to a horizontal position eliminating any drag.

BOAT STABILIZERS

strong>

Even when cruising, SMART TABS continue to function as shock absorbers. Constant adaptation to sea conditions allows SMART TABS to offer remarkable stability when turning, crossing waves, cruising and running at maximum speeds. No more slipping, porpoises or chine walking.

ONE OF A KIND

The unique system is the only one of its kind in the industry . The internal valve system is vrlike "smart" in its design to control your boat's performance.

It will reduce the minimum planning speed by 33%

Providing more comfortable sailing at lower speeds

Improve economy, maneuverability and safety

As boat speed increases, water pressure also increases. Once the water pressure exceeds the actuator's rated load (maximum LIFT period), the trim plates begin to move upward until they are horizontal with the bottom of the boat.

INSTALLATION IS SIMPLE

With a drillelectric, a small drill bit, a Phillips screwdriver and two wrenches, almost anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.

All mounting hardware, instructions and templates are included.

SMART TABS require NO DRILLING THROUGH THE HULL

The new SX Series not only features the anti-rust and anti-corrosion benefits of molded composite materials, but also incorporates all the automatic functions of our popular smart labels. ...

Nauticus SX9510-80 Smart Tab SX Composite Trim Tabs 9.5" x 10" - f/18-20' Boat with 150 - 240HP - Black Related ProductsNauticus PR500 Trim Trim Kit Trim Plate and Protroller Kit
Sika Sikaflex 291 Fast-Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 Fast-Curing Adhesive and SealantFast 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow Curing Adhesive and Sealant 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 291 LOT Adhesive and Slow Cure Sealant 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow Cure Adhesive and Sealant 10.3 oz (300 ml) Cartridge - Mahogany
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - White
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Black
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge - Aluminum Gray
Sika Sikaflex 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3 oz (300 ml) Cartridge ) - Colonial White

Frequently Asked Questions (FAQ) about Nauticus Composite Tabs SX9510-80 Smart Tab SX 9.5" x 10" - f/18-20' Boat with 150 - 240HP - Black Who is the Nauticus?
How to describe the Nauticus SX9510-80 Smart Tab SX ComposIte Trim Tabs 9.5" x 10" - f/18-20' Boat w/150 - 240HP - Black?
What is the construction of the product?
What is the type of actuator?
Who is the Nauticus? No hydraulics... No electrical switches! The Naaticus's compensators are fully automatic and require no operator adjustment while underway. Naaticus Smart Tabs work like shock absorbers, providing stability when cornering, riding waves, cruising, racing and at top speeds. No more slipping, porpoises or walking on chines. Find out today!How to describe the Nauticus SX9510-80 Smart Tab SX 9.5" x 10" Composite Trim Tabs - f/18-20' Boat with 150 - 240HP - Black? The new SX series not only features the anti-rust and anti-corrosion advantages of molded composite materials, but also integrates all automatic functions ofour popular smart labels. ...What is the construction of the product? Composite

$62

Nauticus SX9510-80 Smart Tab SX Composite Trim Tabs 9.5" x 10" - f/18-20 'Boat with 150 - 240HP - Black

$107

Type:	Boat Equipment \| Clipping Tabs
Vendor:	Naaticus
Weight:	4.4 lbs
Actuator type:	Hydraulic
Construction:	Composite
Guidee of user:	Download PDF
Product installation:	Download PDF

Shipping Weight:	4.4 lbs
Box Sizes:	5.00 (h) x 11.00 (w) x 13.00 (w)
Cubic feet:	715.0
Returnable:	Yes