NavPod GP2050-20 Pre-Cut SailPod for Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv Boat Outfitting

GP2050-20 Pre-cut SailPod for Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv

The GP2050 series for Guard 12", SailPods are intended for mounting a single radar or plotter bar-level maps where you can easily operate and clearly see the fine details of the screen. It is best to mount a single SailPod on single-curvature AngleGuards or use dual-curvature AngleGuards to mount an InstrumentPod on the bar. upper vertical section and a SailPod below on the inclined section

High gloss material

NavPods are made with co-extruded ABS material. Customized with Acrylic Cap We use the best UV resistant material provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better rigidity. structural.

The waterproof seal.

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than standard screwss previous. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefit from years of trouble-free service and ae glossy and durable finish. We will deliver on our commitment by now offering a 10 year warranty on NavPods Gen3.

The sail-pod is used to mount a single radar or chartplotter on the helmet. Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...
PRODUCT ID: 59239
SKU: NVN-59239
CSKU: CWR-59239
REWRITE: 70350-navpod-gp2050-20-sailpod- pre-cut-f-garmin-gpsmap-7408
MPN: GP2050-20
UPC: 659988109948
ASIN: B00YAZMAOK
WSKU: NAVGP205020
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP2050-20 SailPod Pre-Cut f/Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv
NAME_EX: NAVPOD GP2050-20 SAILPOD PRE-CUT FOR GARMIN 7408
PITTER: NavPod GP2050-20 Pre-Cut SailPod f/Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv
TYPE: Boat layout | Display Stands
SELLER: NavPod
Ca ELECTRONICS> MARINE ELECTRONICS NAVPOD GP2050-20 sailpod pre-cut f/garmin gpsmap,reg 7408/7408xsv/760

Gtags:

Boat

GSpecs :

NavPod GP2050-20 Pre-Cut SailPod for Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv Product Description GP2050-20 Pre-Cut SailPod for Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv

The GP2050 series for 12" guard, SailPods are intended for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the display. A single SailPod is best mounted on an AngleGuards at single curvature or use dual curvature AngleGuards to install an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

The high gloss material

NavPods are made with custom co-extruded ABS material We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. thick which improves resistanceand offer. for better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing excellent Sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round-head tamper-proof screws have deeper sockets for the NavPod key forr better holding capacity when tightening than previous screws. For Gen3 we provide tamper proof nickel chrome plated stainless steel screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident thatue you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on NavPods Gen3.

The sail-pod is used to mount a single radar or chart plotter on the helmet. Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...

Frequently asked questions (FAQ) about the NavPod GP2050-20 SailPod Pre-Cut f/Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv Who is the NavPod?
How to describe the NavPod GP2050 -20 SailPod Pre-Cut f/Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod GP2050-20 SailPod Pre-Cut f/Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The waterproof seal uUnique, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP2050-20 SailPod Pre-Cut f/Garmin GPSMAP 7408/7408xsv/7608/7608xsv? The sail-pod is used to mount a single radar or chartplotter on the helmet. Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people... Is this cut or not? Cut

$106

NavPod GP2050-20 Pre-Cut SailPod for Garmin GPSMAP 7408/7408xsv/7608/7608xsv

$343

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

For detailed shipping please see our shipping policy and you can find our return & refund policy here.