NavPod GP2200-12 Pre-Cut SailPod for Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard Boat Outfitting

GP2200-12 Pre-cut SailPod for Garmin 7412/7412xsv/7612/7612xsv for 12" wide protection

GP2200 series for 12" protection, SailPods for Sail are for mounting from a single radar or chart plotter to the helm where you can easily operate and clearly see the smallest details of the screen. It is best to mount a single SailPod on single-curvature AngleGuards or use dual-curvature AngleGuards to mount an InstrumentPod on the top vertical section and a SailPod below on the inclined section

The Glossy Material

NavPods are made with a custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better rigiditystructural.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and rear of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for better holding capacitywhen tightening than the previous screws. For Gen3 we provide tamper-proof nickel-chrome plated stainless steel screws for added security combined with a little bling!
The manufacturing process
- Thermoforming large caliber is considered an art. since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of servicetrouble-free and with a shiny, durable finish. We will deliver on our commitment by now offering a 10 year warranty on all new Gen3 NavPods.
The sail-pod is used to mount a single radar or chartplotter on the helmet. . Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...
PRODUCT ID: 59245
SKU: NVN-59245
CSKU: CWR-59245
REWRITE: 70356-navpod-gp2200-12-sailpod- pre-cut-f-garmin-7412
MPN: GP2200-12
UPC: 659988110067
ASIN: B00YAZFCIG
WSKU: NAVGP220012
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP2200-12 Pre-Cut SailPod for Garmin 7412/7412xsv/7612/7612xsv f/12" Wide Guard
NAME_EX: NAVPOD GP2200-12 PRE-CUT SAILPOD FOR GARMIN 7412
PITTER: NavPod GP2200-12 SailPod Pre-Cut for Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard
TYPE: Boat Equipment |Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP2200-12 SailPod Pre-Cut for Garmin 7412 / 7412xsv / 7612/7612xsv for 12" wide protection - GP2200-12

Gtags:

Boat

Automobile

GSpecs:

NavPod GP2200-12 Pre-Cut SailPod for Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard Product Description GP2200-12 Pre-Cut SailPod for Garmin 7412 / 7412xsv / 7612 / 7612xsv for 12" Wide Guard

GP2200 series for 12" guard, SailPods for Sail are intended for mounting a single radar or chartplotter at the helm where you can easily operate it and clearly see the small details of the screen A single SailPod is best mounted on single-bend AngleGuards or use double-bend AngleGuards to mount an InstrumentPod on the top vertical section and a SailPod below on the angled section

. High Gloss Material

NavPods are made with custom co-extruded ABS material We use the best UV resistant material that provides a high gloss white finish that matches the. gel coated fiberglass Gen3 improvements include.now a thicker material. gauge material that improves strength and provides better structural rigidity.

The attached Waterprode

All NavPods are made with a double seal system providing excellent sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. The big screws inRound head screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide tamper-proof nickel-chrome plated stainless steel screws for added security combined with a little bling!
The ManufacTurning Process
- Thermoforming Heavy gauge is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. NOW,with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, glossy finish. We will deliver on our commitment by now offering a 10 year warranty on all new Gen3 NavPods.
The sail-pod is used to mount a single radar or chartplotter on the helmet. . Navigation at your fingertips. "In case of need...in case of need." Sail Pods are the smartest people...

Frequently Asked Questions (FAQ) about NavPod GP2200-12 Pre-Cut SailPod for Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard Who what is the NavPod?
How to describe the NavPod GP2200-12 pre-cut SailPod f/Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP2200-12 SailPod Pre-Cut f/Garmin 7412 / 7412xsv / 7612 / 7612xsvf/12" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the instrument case the best built ever available for the marine industry Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for security and convenience, concealed wiring and clean installation for easy access. NavPod GP2200-12 SailPod Pre-Cut f/Garmin 7412 / 7412xsv / 7612 / 7612xsv f/12" Wide Guard? The sail-pod is used to mount a single radar or chartplotter on the helmet. Navigation at your fingertips. "When necessary…when necessary." Sail Pods are the smartest people...Is it cut or uncut? Cut

Type:	Boat fittings \| Display supports
Supplier:	NavPod
Weight:	5.6 lbs
Cut/no cut:	Cut
Mount Style:	Pedestal

Weightxshipping:	5.6 lbs
Box sizes:	7, 00 (h) x 11.00 (w) x 17.00 (l)
Cubic feet:	1309 ,0
Returnable:	Yes

Boat
Automobile