NavPod PP4400 Uncut PowerPod (Usable Face = 8.75"L x 6"H) (8.75" W x 6" H) - Carbon Black Boat Outfitting
Uncut PowerPod PP4400 (Usable Face = 8.75"L x 6"H) (22.2cm W x 15.2cm H) - Carbon Black
PowerPods are designed for serious boaters who go offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.
The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubbyhole or the aft end of the cockpit table, in particular.ulier on twin wheel boats.
Structural rigidity
Gen3 improvements now include ABS material coated with acrylic of thicker gauge which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!
Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditions.us difficult and humid. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open lee NavPod in the future in order to maintain your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little bling!
Commitment to quality
We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.
Compared to rack installation, PowerPods for Power is a better choice. PowerPods have the advantage of a rotating base, which can provide a sleek appearance for built-in installation.
PRODUCT ID: 63991
SKU: NVN-63991
CSKU: CWR-63991
REWRITE: 75102-navpod-pp4400-powerpod-uncut-usable-face
MPN: PP4400-C
br> br> UPC: 659988112030
ASIN: B082B9W5PQ
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4400 Uncut PowerPod (Usable Face = 8.75" W x 6" H) (22.2 cm W x 15.2 cm H) - Carbon Black
NAME_EX: NAVPOD UNCUT POWERPOD (USEABLE SIDE = 8.75" L x 6"H) (22.2 cm> TYPE: Boat Equipment Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4400 Uncut PowerPod (usable face = 8.75" L x 6" H) (22.2 cm W x 15.2 cm H) ) - CarbonBlack
Gtags:
| Wired |
GSpecs:
NavPod PP4400 Uncut PowerPod (usable face = 8.75" L x 6" H) (22.2 cm W x 15.2 cm H) - Carbon Black Product Description
PP4400 Uncut PowerPod ( usable face = 8.75" W x 6" H) (8.75" W x 6" H) - Carbon Black
PowerPods are designed for serious boaters blasting offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.
The PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the cubbyhole or the aft end of the cockpit table particularly on twin wheel boats.
R structureligidity
Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!
Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This joint offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell polyurethane internal seal is nIt is 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provideWe have tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little bling!
Commitment to quality
We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.
Compared to rack installation, PowerPods for Power is a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
Frequently asked questions (FAQ) about NavPod PP4400 Uncut PowerPod (usable face = 8.75" width x 6" height) (22 .2 cm width x 15.2 cm height) - Carbon Black Who is the NavPod?
How to describe the NavPod PP4400 PowerPodUncut (usable face = 8.75"L x 6"H) (22.2cm W x 15.2cm H) - Carbon Black?
Is this carbon black? Cut or Uncut? How to mount or what is the mounting style of NavPod PP4400 Uncut PowerPod (Usable Face = 8.75" W x 6" H) (22.2 cm W x 15.2 cm H) ) - Carbon black?
What is the size of the useful surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring, and clean installation for easy access. How to Describe NavPod PP4400 Uncut PowerPod (Usable Face = 8.75" Width x 6" Height) (8.75" Width x 6" H) - Ca Blackrbone? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Uncut How to mount or what is the mounting style of the Uncut NavPod PP4400 PowerPod (usable face = 8.75" width x 6" height) (22.2 cm width x 15. 2 cm in height) - Carbon black? DashWhat is the size of the usable surface area of the product? 8.75"L x 6"H
Save $77 when you purchase the NavPod PP4400 PowerPod Uncut (Usable Face = 8.75"L x 6") "H) (8.75" W x 6" H) - Carbon Blackfor only $272 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP4400 Uncut PowerPod (Usable Face = 8.75"L x 6"H) (22.2cm W x 15.2cm H) - Carbon Black Technical Specifications
| Type: | Outfittingof boat | Display Media |
|---|---|
| Supplier: | NavPod |
| Cut/Uncut: | Uncut |
| Edit Style: | Drawn |
| Heads usable: | 8.75"L x 6"H |
- NavPod PP4400 Uncut PowerPod
- NavPod PP4101 Pre-cut PowerPod for one instrument
- NavPod PP4100 Uncut PowerPod
- NavPod PowerPod with pre-cut RAM holder for Simrad NSS12 evo³ and B&G Zeus³ 12 - Carbon Series
- NavPod PowerPod with Pre-Cut RAM Holder for Simrad GO9 and B&G Vulcan9 - Carbon Black
- NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-9 Gen2 Touch HDS-9 Gen3 and HDS Carbon 9 - Carbon Black
- NavPod PowerPod with Pre-Cut RAM Holder for Lowrance HDS-7 Gen2 Touch HDS-7 Gen3 and HDS Carbon 7 - Carbon Black
