NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7 7xx7xsv 7x1/7x1xs and 70s/70dv - Carbon Black Boat Outfitting

PP4401 Pre-cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s/70dv - Carbon Black

PowerPods are designed for serious boaters who sail offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the dodger or the aft end of the cockpit table, especially s.on dual wheel boats.

High gloss material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the absolute.UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "comppressure defined" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large Round Head Tamper Proof Screws There are deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63992
SKU: NVN-63992
CSKU: CWR-63992
REWRITE: 75103-navpod-pp4401-powerpod-pre-cut-f-garmin-gpsmap-7xx7
MPN: PP4401-C
UPC: 659988112047
ASIN: B07XVBGMHC
WSKU: NAVPP4401C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs & 70s/70dv - Carbon Black
EX_NAME: PRE-CUT NAVPOD POWERPOD FOR GARMIN 7407/7407XSV/7607/
PTITLE: Pre-Cut NavPod PP4401 PowerPod for Garmin GPSMAP 7xx7, 7xx7 xsv, 7x1/7x1xs and 70s/70dv - Carbon Black
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4401 PowerPod Pre-Cut f/Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs 70s/70dv - Carbon Black

Gtags:

GSpecs:

NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s/70dv - Carbon Black Product Description

PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s/70dv - Carbon Black

PowerPods are designed for serious offshore boaters. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intendeds to be mounted on a flat surface. Perhaps under the dodger or the aft end of the cockpit table particularly on twin wheel boats.

The Shiny Hi-Material

NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal withan improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the toolsage. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will have years of trouble-free service and a long-lasting glossy finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s/70dv - Carbon Black Who is the NavPod?
How to describe the NavPod PP4401 Pre-Cut PowerPod f/Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs & 70s/70dv - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP4401 PowerPod Pre-Cut f/Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs & 70s/70dv - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality construction and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy accessisland. How to describe the NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s /70dv - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut

$87

NavPod PP4401 Pre-Cut PowerPod for Garmin GPSMAP 7xx7, 7xx7xsv, 7x1/7x1xs and 70s/70dv - Carbon Black

$282

Type:	Boat layout\| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.