NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black Boat Outfitting

PP4600-00 Uncut PowerPod (usable face = 11.375"L x 6.75"H) (28.9 cm W x 17.1 cm H) - Carbon Black

The PowerPods are designed for serious boaters who blast offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface perhaps under the Dodger or aft end of the cockpit table, particularly on boats.x dual wheels.

Structural Rigidity
Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Improvementss Gen3 include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3 we provide tamper proof nickel plated chrome stainless steel screws for added security combined with a little bling!

Commitment to quality
We are committed to produce boxesHigh quality waterproof iers for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

PP4600-00 Uncut PowerPod (Available area = 11.375" W x 6.75" H) (11.25" L x 6.75" H) -Carbon Black PowerPods are specially designed for serious boaters who blast out to sea. He asked...
PRODUCT ID: 63930
SKU: NVN-63930
CSKU: CWR-63930
REWRITE: 75041-navpod-pp4600-00-powerpod-uncut-usable-face
MPN: PP4600-00-C
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black
NAME_EX: NAVPOD POWERPOD UNCUT (USABLE FACE = 11.375"Wusable size = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:

GSpecs:

NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black Product DescriptionPP4600-00 Uncut PowerPod (usable face = 11.375" W x 6.75" H) (28.9 cm wide x 17.1 cm high) - Carbon Black

PowerPods are designed for boaters serious which explode offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPodsur Sail are intended to be mounted on a flat surface. Perhaps under the cubbyhole or aft end of the cockpit table especially on twin wheel boats.

Structural Rigidity
Gen3 improvements now include coated ABS material of thicker gauge acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This joint offers the best prprotection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide steel tamper-proof screwsnickel plated stainless steel chrome plated for added safety combined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof enclosures for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

PP4600-00 Uncut PowerPod (Available Area = 11.375" W x 6.75" H) (28.9 cm L x 17.1 cm H) - PowerPods Carbon Black are specially designed for serious boaters who blast at sea. It required...

Frequently Asked Questions (FAQ) for NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"W x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black Qui is the NavPod? How to describe the NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Blacke?
Is it cut or uncut?
How to mount or what is the mounting style of the Uncut NavPod PP4600-00 PowerPod (usable face = 11.375"W x 6.75"H) ( 11.25" W x 6.75" H) - Carbon Black?
How big is the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-evident clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black? PP4600-00 Uncut PowerPod (Available area = 11.375" L x 6.75" H) (28.9 cm W x 17.1 cm H) - Black PowerPodsr carbon are specially designed for serious boatmen who blast at sea. He asked...Is it cut or not? Uncut How to mount or what is the mounting style of the Uncut NavPod PP4600-00 PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm L x 17.1cm cm H) - Carbon black? DashWhat is the size of the usable surface area of the product? 11.125"L x 6.5"H

Save $88 when you purchase the NavPod PP4600-00 PowerPod Uncut (Usable Face = 11.375"L x 6") .75"H) (28.9cm W x 17.1cm H) - Carbon Blackfor only $311 at NVN Marine! Same day shipping before 3 p.m. NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) - Carbon Black Technical Specifications

Type:	Boat outfitter \| Display Media
Supplier:	NavPod
Cut/Uncut :	Uncut
Editing style:	Drawn
Usable side:	11.125"W x 6.5"H

NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375" Width x 6.75" Height) (28.9 cm Width x 17.1 cm Height) - Carbon Black Customer Reviews usersNavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375" W x 6.75" H) (11.25" W x 6.75" H) - Carbon Black Shipping & Returns

For details detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.