NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) Boat Outfitting

PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H)

PowerPods are designed for serious boaters who blast offshore. . He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface perhaps under the Dodger or aft end of the cockpit table, particularly on ju wheel boats.

Structural Rigidity
Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements incThey feature a thicker silicone outer seal with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronics. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3 we provide tamper proof nickel plated chrome stainless steel screws for added security combined with a little bling!

Commitment to quality
We are committed to produce high quality waterproof enclosuresquality for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Whether you are a professional or a cruising enthusiast, you will be able to make the most of your boat and your time on the water! Based on the principle of considering the highest standards of quality and reliability, each...
PRODUCT ID: 63928
SKU: NVN-63928
CSKU: CWR-63928
REWRITE: 75039 -navpod-pp4600-00-powerpod-uncut-usable-face
MPN: PP4600-00
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4600-00 Uncut PowerPod (usable face = 11.375" W x 6.75" H) (28.9 cm W x 17.1 cm H) )
NAME_EX: NAVPOD POWERPOD UNCUT (USABLE FACE = 11.375"H) (28.9
PTITRE: NavPod PP4600-00 PowerPod uncut (usable faceable = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H)
TYPE: Boat Equipment Display Racks
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod TamperProof Screw Kit TPK300

Gtags:

SAE
Assembly

GSpecs:

NavPod PP4600-00 Uncut PowerPod (usable side = 11.375"L x 6.75"H) (28.9 cm W x 17.1 cm H) Product DescriptionPP4600-00 Uncut PowerPod (usable side = 11.375"L x 6.75"H (28.9cm W x 17.1cm H)

PowerPods are designed for serious boaters who blast offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mountedon a flat surface. Perhaps under the cubbyhole or aft end of the cockpit table, particularly on twin wheel boats.

Structural Rigidity
Gen3 improvements now include coated ABS material of thicker gauge acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod for Gen3. NavPods, we provide nickel-plated stainless steel tamper-proof screws for added security.mbined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty. or a person who loves to cruise, you can make the most of your boat and your time on the water! Based on the principle of considering the highest standards of quality and reliability, each...

Frequently Asked Questions (FAQ) about the NavPod PP4600 -00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) Who is the NavPod? How to Describe the NavPod PP4600-00 Uncut PowerPod cut (Usable face = 11.375"L x 6.75"H) (28.9cm wide x 17.1cm high)?
Is it cut or uncut?
How do Iter or what is the mounting style of the uncut NavPod PP4600-00 PowerPod (usable face = 11.375" wide x 6.75" high) (28.9 cm wide x 17.1 cm high)?
What is the size of the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, waterproof pad mountings for added safety and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375" W x 6.75" H) (28.9 cm W x 17.1 cm H)? Whether you are a professional or a cruising enthusiast, you will be able to make the most of your boat and your time on the water! Based on the principle of takingtaking into account the highest standards of quality and reliability, each... Is it cut or uncut? Uncut How to mount or what is the mounting style of the Uncut NavPod PP4600-00 PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm L x 17.1cm cm H)? DashWhat is the size of the usable surface area of the product? 11.125"L x 6.5"H

Save $88 when you purchase the NavPod PP4600-00 PowerPod Uncut (Usable Face = 11.375"L x 6") .75"H) (28.9 cm wide x 17.1 cm high)for only $311 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP4600-00 Uncut PowerPod (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H) Technical Specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Uncut
Edit Style:	Printed
Usable side:	11.125"W x 6.5"H

NavPod PP4600-00 Uncut PowerPod (usable face = 11.375"W x 6.75"H) (28.9cm L x 17.1cm cm H) H) (28.9 cm wide x 17.1 cm high) Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return policy and refund here.