NavPod PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ci Boat Outfitting
PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ciPP4500 series, PowerPods are a better option than rack mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.
The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.
PowerPods for Sail are perfect for mounting on a flat surface. Maybe under the hood or behind the cockpit table, especiallyon dual wheel boats.
High gloss material
- NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
The watertight seal
- All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to damage.is at a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.
Chrome-plated nickel screws
- We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!
The manufacturing process
- Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use C programs.AO such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will have years of ruble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.
Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59314
SKU: NVN-59314
CSKU: CWR-59314
REWRITE: 70425-navpod-pp4500-06-powerpod-pre-cut-f- humminbird-859ci-899ci
MPN: PP4500-06
UPC: 659988110852
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-06 Pre-Cut PowerPod f/Humminbird 859ci/899ci
EX_NAME: NAVPOD PP4500-06 PRE-CUT POWERPOD FOR HUMMINBIRD 859CI
PTITLE: NavPod PP4500-06 PowerPod Pre -Cut f/Humminbird 859ci/899ci
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4500-06 PowerPod Pre-Cut f/Humminbird 859ci/899ci
Gtags:
| Boat | |
| Automobile |
GSpecs:
NavPod PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ci Product Description PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ci
PP4500 series, PowerPods are a better option than mounting on support. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.
The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.
Sail PowerPods are perfect for mounting on a surfboardace plane. Perhaps under the dodger or aft of the cockpit table, especially on boats with dual lights.
The high gloss material
- NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
The watertight seal
- All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with an adjustmentimproved flush stement. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.
Chrome-plated nickel screws
- We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!
The manufacturing process
- Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are lucky toYou can count on experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. Now with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.
Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The last industry...
Frequently Asked Questions (FAQ) About NavPod PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ci Who is the NavPod?
How to describe NavPod PP4500-06 Pre-Cut PowerPod f/Humminbird 859ci/899ci?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4500-06 PowerPod pre-cut for Humminbird 859ci/899ci?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4500-06 PowerPod Pre-Cut f/Humminbird 859ci/899ci? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP4500-06 PowerPod Pre-Cut f/Humminbird 859ci/899ci? Dash
Save $84 when you purchase the NavPod PP4500-06 Pre-Cut PowerPod for Humminbird 859ci/899ci for only $295 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500-06 Pre-Cut PowerPod f/Humminbird 859ci/899ci Technical Specifications
| Type: | Boat Equipment | Display Media |
|---|---|
| Supplier: | NavPod |
| Cut/Uncut: | Cutted |
| Edit Style: | Dash |
For detailed shipping terms, please see our shipping policy and you can find our return & refund policy here.
- NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black
- NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7
- NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black
- NavPod PP4500-03 Pre-Cut PowerPod for Lowrance Elite-7 CHIRP
- NavPod PP4500-02 Pre-Cut PowerPod for Raymarine eS75/eS77/eS78 - Carbon Black
- NavPod PP4500-02 Pre-Cut PowerPod for Raymarine eS75/eS77/eS78
- Navpod PP4500-01-C PowerPod for Simrad GO7
