NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 Boat Outfitting

PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7

PP4500 series, PowerPods are a better option than bracket mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the hood or aft of the cockpit table, especially ontwin wheel boats.

The shiny material

NavPods are made with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "compressiondefined" as many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such asSolidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we're confident you'll have years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59315
SKU: NVN-59315
CSKU: CWR-59315
REWRITE: 70426-navpod-pp4500-05-powerpod-pre-cut-f- humminbird-helix-7
MPN: PP4500-05
UPC: 659988110593
ASIN: B07R8V1VPJ
WSKU: NAVPP450005
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-05 Pre-Cut PowerPod for HUMMINBIRD HELIX 7
EX_NAME: NAVPOD PP4500-05 PRE-CUT POWERPOD FOR HUMMINBIRD HELIX 7
PTITLE: NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7
TYPE: Boat Equipment |Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - PP4500 -05

Gtags:

GSpecs:

NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 Product Description PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7

The PP4500 series, PowerPods are a better option than the mounting bracket. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Pperhaps under the dodger or aft of the cockpit table, particularly on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. THEInternal EPDM gasket is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

The Chrome Nickel Plated Screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on engineersExperienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, shiny finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The last industry...

Frequently Asked Questions (FAQ) about NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7 Who is the NavPod?
How to describe the NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP4500-05 PowerPod Pre-Cut -Cut f/Humminbird HELIX 7?
Who is the NavPod Navpod? a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best built instrument housing ever available for the marine industry. Features of all Navpods include the seal. waterproof silicone, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access How to describe the NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7? rack, PowerPods for Power are a better choiceix. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? CutHow to mount or what is the mounting style of NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7? Dash

Save $89 when you purchase the NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 for only $290 b> from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 Technical Specifications

Type:	Boà la pourvoirie \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 User ReviewsNavPod PP4500-05 PowePre-Cut rPod for Humminbird HELIX 7 Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return & refund policy here.