NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black Boat Outfitting

PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black

PP4500 Series, PowerPods are a better option than support mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Maybe under the dodger orbehind the cockpit table, especially on twin wheel boats.

The Hi-Gloss MateriAll NavPods are made with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is nots subjected to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all stainless steel screws. Stainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who useCAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting glossy finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63920
SKU: NVN-63920
CSKU: CWR-63920
REWRITE: 75031-navpod-pp4500-01-powerpod-pre-cut-f-garmin-echomap-72sv- 73sv-74sv-75sv-72dv-73dv-74dv-75dv
MPN: PP4500-01-C
UPC: 659988114225
ASIN:
WSKU: NAVPP440010C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black
NAME_EX: NAVPOD POWERPOD PRE-CUT FOR GARMIN ECHOMAP 72SV/73SV/74SV/
PTITLE: NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv /74dv/75dv - Carbon black
TYPE: Boat fittings | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp4500-01 powerpod pre-cut f/garmin echomap 72sv, 73sv, 74sv,

Gtags:

GSpecs:

NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black Product Description PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv /74sv/75sv /72dv/73dv/74dv/75dv - Carbon Black

PP4500 Series, PowerPods are a better option than stand mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from damage caused by exposure.prolonged UV ion.

The PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on twin-wheel boats.

The shiny material
NavPods are made with a custom co-extruded acrylic cap. ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements incThey feature a thicker silicone outer seal with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel plated chrome screws
We use all steel mounting hardware stainless steel supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the toollage. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black Who is the NavPod?
How to describe the NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv - Carbon Black?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/ 74dv /75dv - Voiturebon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. Howt describe the NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv /72dv/73dv/74dv/75dv - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut

$93

NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv /75dv - Carbon Black

$286

Type:	Appealboat deck \| Display Media
Supplier:	NavPod
Weight:	4.25 lbs
Cut/Uncut:	Coupe
Mounting style:	Dashboard

Shipping Weight:	4.25 lbs
Box sizes:	8.00 (h) x 11.00 (w) x 13.00 (w) )
Cubic feet:	1144.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy shipping and you canfind our return and refund policy here.