NavPod PP4500 Uncut PowerPod (Usable Face = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black Boat Outfitting

PP4500 Uncut PowerPod (usable face = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black

The PowerPods are designed for serious boaters who blast offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface perhaps under the Dodger or aft end of the cockpit table, particularly on the.twin wheel boats.

Structural Rigidity
Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. The improvementsGen3 rations include a thicker silicone outer seal with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3 we provide tamper proof nickel plated chrome stainless steel screws for added security combined with a little bling!

Commitment to quality
We are committed to produceHigh quality waterproof enclosures for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for built-in installation.n.
PRODUCT ID: 63927
SKU: NVN-63927
CSKU: CWR-63927
REWRITE: 75038-navpod-pp4500-powerpod-uncut-usable-face
MPN: PP4500-C
br> UPC: 659988112153
ASIN: B082BDX2HG
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500 PowerPod no Cut (Usable Face = 10.75" W x 6.5" H) (27.3 cm W x 16.5 cm H) - Carbon Black "LUncut (Usable Face = 10.75" L x 6.5" H) (27.3 cm W x 16.5 cm H) - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4500 Uncut PowerPod (Usable Face = 10.75 " W x 6.5" H) (27.3 cm W x 16.5 cm H) - Carbon Black

Gtags:

Plastic

GSpecs:

NavPod PP4500 Uncut PowerPod (Usable Face = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black Product DescriptionPP4500 Uncut PowerPod (Face) usable = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black

PowerPods are designed for serious boaters who blast offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to bee mounted on a flat surface. Perhaps under the dodger or aft end of the cockpit table particularly on twin wheel boats.

Structural Rigidity
TGen3 improvements now include coated ABS material of thicker acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell polyurethane internal seal is now 50% thicker and does not under-reject "compression regulation" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screwsfor added safety combined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof enclosures for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about NavPod PP4500 Uncut PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm wide x 16.5 cm high) - Carbon Black Who is the NavPod?
How to describe the NavPod PP4500 Uncut PowerPod (usable face = 10.75"L x 6.5"H ) (27.3 cm L x 16.5 cm H) -Carbon Black?
Is it carbon black? Cut or Uncut?
How to mount or what is the mounting style of Uncut NavPod PP4500 PowerPod (Usable Face = 10.75" W x 6.5" H) (27.3 cm W x 16.5 cm H) - Carbon black?
What is the size of the useful surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-resistant fasteners for security and convenience, concealed wiring and clean installation for easy access. How to describe the Uncut NavPod PP4500 PowerPod (Usable Face = 10.75" Width x 6.5" Height) (27.3 cm Width x 16.5 cm Height) - Carbon Black? Compared to rack installation, PowerPods forPower are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Uncut How to mount or what is the mounting style of the Uncut NavPod PP4500 PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm width x 16.5 cm in height) - Carbon black? DashWhat is the size of the usable surface area of the product? 10"L x 6.5"H

Save $79 when you purchase the NavPod PP4500 PowerPod Uncut (Usable Face = 10.75"L x 6") .5"H) (27.3cm W x 16.5cm H) - Carbon Blackfor only $280 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500 Uncut PowerPod (Usable Face = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black Technical Specifications

Type :	Boat equipment \| Display media
FoUrnizer:	NavPod
Weight:	4.8 lbs
Cut/Uncut:	Uncut
Mounting Style:	Dashboard
Usable Face:	10" L x 6.5"H

NavPod PP4500 Uncut PowerPod (usable face = 10.75"L x 6.5"H) (27 .3 cm width x 16.5 cm height) - Carbon Black User ReviewsNavPod PP4500 Uncut PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm width x 6.5" tall) - Carbon Black Shipping & Returns Shipping Weight:

4.8 lbs

Box sizes:

7.00 (h) x 11.00 (w) x 12.00 (w)

Cubic feet:

924.0

Returnable :

Yes

For detailed shipping terms, seePlease review our Shipping Policy and you can find our Return and Refund Policy here.