NavPod PP4500 Uncut PowerPod (usable face = 10.75"L x 6.5"H) (27.3cm W x 16.5cm H) Boat Outfitting

Uncut PowerPod PP4500 (usable face = 10.75" width x 6.5" height) (27.3 cm width x 16.5 cm height)

PowerPods are designed for serious boaters who blast offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface perhaps under the Dodger or aft end of the cockpit table, in particular.ulier on dual-wheel boats.

Structural rigidity
Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better rigidity structural.its thicker material allows greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and most humid offshore sailing conditions.of the. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future for electronic maintenance. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3 we provide tamper proof nickel plated chrome stainless steel screws for added security combined with a little bling!

Commitment to quality
We are committed to producee high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 63917
SKU: NVN-63917
CSKU: CWR-63917
REWRITE: 75028-navpod-pp4500-powerpod-uncut-usable-face
MPN : PP4500
UPC: 659988110548
ASIN: B082B9NN7R
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500 Uncut PowerPod (Usable Face = 10.75" Width x 6.5" Height) (27.3cm Width x 16.5cm Height)
EX_NAME: NAVPOD UNCUT POWERPOD (USABLE FACE = 10.75" widex 6.5" height) (27.3 W
PITTER: Uncut NavPod PP4500 PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm width x 16 .5cm height)
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS Uncut NavPod PP4500 PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm width x 16.5 cm height)

Gtags:

GSpecs:

NavPod PP4500 Uncut PowerPod (usable face = 10.75"L x 6.5"H) (27.3 cm W x 16.5 cm H) Product Description PP4500 Uncut PowerPod (usable face = 10. 75" L x 6.5" H) (27.3 cm W x 16.5 cm H)

PowerPods are designed for serious boaters who cruise offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned at a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the Dodger or aft end of the cockpit table, especially on twin wheel boats.

Structural Rigidity
Gen3 improvements now includeUse ABS material coated with thicker gauge acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPodss are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
The NavPod uses all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added securitycombined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof cases for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods hYou get the advantage of a rotating base, which can provide a clean appearance for built-in installation. The latest industry...

Frequently Asked Questions (FAQ) about Uncut NavPod PP4500 PowerPod (Usable Face = 10.75"L x 6.0" 5"H) (27.3cm W x 16.5cm H) Who is the NavPod? How to Describe the Uncut NavPod PP4500 PowerPod (Usable Face = 10.75"W x 6.5"H) (27.3 cm L x 16.5 cm H)?
Is this the case? Cut or uncut?
How to mount or what is the mounting style of NavPod PP4500 Uncut PowerPod (usable face = 10.75" width x 6.5" height) (27.3 cm width x 16.5 cm height )?
What is the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring and clean installation for easy access. How to describe the uncut NavPod PP4500 PowerPod (usable face = 10.75" W x 6.5" H) (27.3 cm W x 16.5 cm H)? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can givea clean appearance for an integrated installation. The latest industry...Is it cut or uncut? Uncut

$79

NavPod PP4500 PowerPod Uncut (Usable Face = 10.75"L x 6") .5"H) (27.3cm W x 16.5cm H)

$280

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Uncut
Edit Style:	Pull
Usable side:	10"L x 6.5"H

For details the detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.