NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv Boat Outfitting

PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv

PP4500 Series, PowerPods are a better option than mounting on support. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Maybe under the hood or in the back of the table to the cockpit, especially on twin wheel boats.

Glossy Material
NavPoThe ds are manufactured with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject toa "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all stainless steel brackets, hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident that you will enjoy years of trouble-free service and a long-lasting, high-gloss finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59312
SKU: NVN-59312
CSKU: CWR-59312
REWRITE: 70423-navpod-pp4500-01-powerpod-pre-cut-f- garmin-echomap-72sv-73sv-74sv-75sv-72dv-73dv-74dv-75dv
MPN: PP4500-01
UPC: 659988110555
ASIN: B07X4ZQ4YY
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv /75dv
NAME_EX: NAVPOD PP4500-01 PRE-CUT POWERPOD FOR GARMIN ECHOMAP
PTITLE: NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv
TYPE: Boat outfitting | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
GPS or Navigation System
NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP Chirp 72cv/73cv / 74cv/75cv/72dv/73dv/74dv/75dv/72sv/73sv/74sv/75sv
Navpod Pp450001 Powerpod PreCut FGarmin Echomap 72sv73sv74sv75sv72dv by Hodges Marine
GPS or navigation system
Gtags:

GSpecs:

NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv Product Description PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/ 75sv/72dv/73dv/74dv/75dv

PP4500 Series, PowerPods are a better option than stand mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

LThe PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the torque on the left or aft end of the cockpit table, especially on twin wheel boats.

The glossy material
NavPods are made with a custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external seal inthicker silicone with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We have the cadvantage of having experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting, brilliant finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The last industry...

Frequently Asked Questions (FAQ) about NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv Who is the NavPod?
How to describe the NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/ 74dv /75dv?
Who is the NavPod? Navpod is a gambleIt's the best way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv /72dv/73dv/74dv/75dv? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP4500-01 PowerPod Pre-Cut f/Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv? Dash

Save $84 when you purchase the NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv /75dvfor only $295 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/72dv/73dv/74dv/75dv Technical Specifications

Type:	Boat outfitter \| Display media
Supplier :	NavPod
Weight:	4.35 lbs
Cut/Uncut:	Cut
Style of assembly:	Dashboard

NavPod PP4500-01 Pre-cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv /75sv/72dv/73dv/74dv/75dv User ReviewsNavPod PP4500-01 Pre-Cut PowerPod for Garmin echoMAP™ 72sv/73sv/74sv/75sv/ 72dv/73dv/74dv/75dv Shipping & Returns

Shipping Weight:	4.35 lbs
Box Sizes:	7.00 (h) x 11.00 (w) x 12.00 (l)
Cubic feet:	924.0
Returnable:	Yes