NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black Boat Outfitting

PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black

PP4500 series, PowerPods for power supply are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the hoodor on the back of the cockpit table, especially on twin wheel boats.

The glossy material
NavPods are made of ABS material coated with custom co-extruded acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% plus thick and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all steel mounting hardware stainless steel. supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use softwareCAD software such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident that you will benefit from years of trouble-free service and a long-lasting high gloss finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63922
SKU: NVN-63922
CSKU: CWR-63922
REWRITE: 75033-navpod-pp4500-03-powerpod-pre-cut-f-lowrance-elite-7-chirp
MPN: PP4500-03-C
UPC: 659988112184
ASIN: B07R4N78J9
WSKU: NAVPP450003C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR LOWRANCE ELITE-7 CHIRP 7"
PTITLE: NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black
TYPE: Boat Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4500-03 Powerpod Pre-Cut f/Lowrance Elite-7 CHIRP - Carbon Black

Gtags:

GSpecs:

NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black Product Description PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black

The PP4500 Series, the PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

ThePowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table especially on twin wheel boats.

High gloss material
NavPods are made with a Custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include sili external sealthicker cone with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Nickel plated chrome screws
We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are lucky to be able toYou can count on experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

QuestionsFrequently Asked Questions (FAQ) about NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black Who is the NavPod?
How to Describe NavPod PP4500-03 Pre-Cut Powerpod f/Lowrance Elite-7 CHIRP - Carbon Black?
Is it cut or not?
How to mount or what is the mounting style of the NavPod PP4500 -03 Pre-cut Powerpod f/Lowrance Elite-7 CHIRP - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4500-03 Powerpod Pre-Cut f/Lowrance Elite-7 CHIRP - Carbon Black? Compared to the instWhen rack-mounted, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP4500-03 Powerpod Pre-Cut f/Lowrance Elite-7 CHIRP - Carbon Black? Dash

Save $89 when you purchase the NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black for only $290from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500-03 Pre-Cut Powerpod f/Lowrance Elite-7 CHIRP - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite-7 CHIRP - Carbon Black User ReviewsNavPod PP4500-03 Pre-Cut Powerpod for Lowrance Elite- 7 CHIRP - Carbon Black Shipping & Return

For detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.