NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black Boat Outfitting

PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black

The PP4500 series, PowerPods are a better option than bracket mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the hood or at the rear of the cockpit table, inespecially on dual wheel boats.

The Glossy Material
NavPods are made with a custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "compressiondefined" as many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all steel mounting hardware stainless steel that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia et AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish.ch. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63923
SKU: NVN-63923
CSKU: CWR-63923
REWRITE: 75034-navpod-pp4500-05-powerpod-pre-cut-f-humminbird-helix-7
br> br> MPN: PP4500-05-C
UPC: 659988112191
ASIN: B07R9ZXLQ6
WSKU: NAVPP450005C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4500-05 PowerPod pre- cut out f/Humminbird HELIX 7 - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR HUMMINBIRD HELIX 7 SERIES 7
PTITRE: NavPod PP4500-05 PowerPod Pre -Cut f/Humminbird HELIX 7 - Carbon Black
TYPE : Boat equipment | Display Media
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp4500-05 powerpod pre-cut f/humminbird helix 7 - carbon black

Gtags:

GSpecs:

NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black Product Description PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black

The PP4500 series, PowerPods are a better option than bracket mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect formounting on a flat surface. Perhaps under the dodger or aft of the cockpit table especially on twin wheel boats.

High gloss material
NavPods are made with high gloss material Custom co-extruded ABS with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with a flush fitant improved. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Nickel plated chrome screws
We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to be able to count on design engineerswe have experienced in-house staff who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, long-lasting finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about the NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black Who is the NavPod?
How to describe the NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7 - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP4500-05 PowerPod Pre-Cut -Cut f/Humminbird HELIX 7 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, quality build and attractive design make the best-built instrument house still available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7 - Carbon Black? Compared to rack installation, PowerPods for Power constitute an best choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP4500-05 PowerPod Pre-Cut f/Humminbird HELIX 7 - Carbon Black? Dash

Save $111 when you purchase the NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black for only 268 $from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4500-05 Pre-Cut PowerPod f/Humminbird HELIX 7 - Carbon Black Technical Specifications

Type:	Boat Outfitting \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Blackcarbon User ReviewsNavPod PP4500-05 Pre-Cut PowerPod for Humminbird HELIX 7 - Carbon Black Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return & refund policy here .