NavPod PP4800-07 Pre-Cut PowerPod for Raymarine AXIOM 9 (Pre-Cut for surface mounting using rear mounting brackets requires Raymarine right angle connector) Boat Outfitting

PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 (pre-cut for surface mounting using rear mounting brackets, requires Raymarine right angle connector)

PowerPods are designed for the serious boater who blasts offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface.us the cubbyhole or aft end of the cockpit table, especially on twin wheel boats.

High gloss material

NavPods are made with a co-extruderAcrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are made with a double seal system providing excellent sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal sealrne EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel plated chrome screws

We use all mounting stainless steel mounting. hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is taken into account. an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count onExperienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will enjoy years of trouble-free service and a long-lasting, durable glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

It has the highest demands on boats and electronic equipment. It needs a sturdy and durable mounting frame to protect important electronic equipment from the harshest boating conditions. Robust...
PRODUCT ID: 71852
SKU: NVN-71852
CSKU: CWR-71852
REWRITE: 82963-navpod-pp4800-07-powerpod-pre-cut-f-raymarine-axiom- 9
MPN: PP4800-07
UPC: 659988115680
ASIN: B07K4YYF96
WSKU: NAVPP480007
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 (pre-cut for surface mounting using rear mounting brackets, requires Raymarine right angle connector)
EX_NAME: NAVPOD PP4800-07 PRE-CUT POWERPOD FOR RAYMARINE AXIOM 9
TITLE: NavPod PP4800-07 Pre-Cut PowerPod f/Raymarine AXIOM 9 (Pre-Cut for surface mount using rear mounting brackets, requires Raymarine right angle connector)
TYPE : boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod PP4800-07 Pre-cut PowerPod for Raymarine Axiom 9 (the pre-cutout is for surface mounting Use of rear mounting brackets, requires Raymarine right angle connector) br>
Gtags:

GSpecs:

NavPod PP4800-07 Pre-Cut PowerPod for Raymarine AXIOM 9 (Pre-Cut for surface mounting using rear mounting brackets, requires Raymarine right angle connector) Product Description

PP4800-07 Pre-Cut PowerPod for Raymarine AXIOM 9 9 (Precut for surface mounting using rear mounting brackets, requires Raymarine right angle connector)

PowerPods are designed for serious boaters who blast at wide. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swing tube provides ample room to passwires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the esquiveer or aft end of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with a custom co-extruded material ABS material coated with acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are made with a double seal system providing excellent sealing between the front and back of the NavPod to protect your electronics marine. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to maintain your electronic devices.

Nickel plated chrome screws

We use all hardware stainless steel mounting bracket supplied with each NavPod. . Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is taken into account. an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

It has the highest demands onboats and electronic equipment. It needs a sturdy and durable mounting frame to protect important electronic equipment from the harshest boating conditions. Robust...

NavPod PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 (pre-cut for surface mounting using rear mounting brackets, requires Raymarine right angle connector) Related Products Raymarine AXIOM 1.5 power supply Right angle M connector and NMEA 2000

Frequently asked questions (FAQ) about the NavPod PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 ( Pre-cut f/surface mount using rear mounting brackets, requires Raymarine right angle connector)Who is the NavPod?
How to describe the NavPod PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 ( pre-cut for surface mounting using rear mounting brackets, requires Raymarine right angle connector)?
Is it cut or uncut? How to mount or what is the mounting style of NavPod PP4800-07 Pre-Cut PowerPod for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Mounting Brackets rear, requires Raymarine right angle connector )?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4800-07 PowerPod Pre-Cut f/Raymarine AXIOM 9 (Pre-Cut f/Surface Mount using rear mounting brackets, requires Raymarineou right angle connection)? It has the highest demands in terms ofboats and electronic equipment. It needs a sturdy and durable mounting frame to protect important electronic equipment from the harshest boating conditions. Robust...Is it cut or uncut? CutoutHow to mount or what is the mounting style of NavPod PP4800-07 Precut PowerPod for Raymarine AXIOM 9 (precut for surface mount using rear mounting brackets, requires right angle connector Raymarine)? Dash

Save $115 when you purchase the NavPod PP4800-07 Pre-cut PowerPod for Raymarine AXIOM 9 (pre-cut for surface mounting using mounting brackets rear mount) , requires Raymarine right angle connector)for only $374 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP4800-07 Pre-Cut PowerPod for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Angled Connectore right Raymarine) Technical specifications

Type:	Boat outfitter \| ShowMedia
Seller:	NavPod
Weight:	6.1 lbs
Mounting Style:	Table edge
Cut/Uncut:	Cut

NavPod PP4800-07 Precut PowerPod for Raymarine AXIOM 9 (Precut for surface mounting using rear mounting brackets, requires Raymarine right angle connector) User ReviewsNavPod PP4800-07 Precut PowerPod for Raymarine AXIOM 9 (pre-cut for /Surface mount using rear mounting brackets, requires Raymarine right angle connector) Shipping & Returns

Shipping Weight:	6.1 lbs
Box sizes:	9.00 (h) x 13 .00 (l) x 15.00 (l)
Pieds cubes:	1755.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.