NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series Boat Outfitting

PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series

PP5050 Series PowerPods are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the hood or in the backof the cockpit table, especially on twin wheel boats.

The glossy material

NavPods are made with a co- Custom extruded acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% strongerthick and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel eel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineerss who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will have years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59313
SKU: NVN-59313
CSKU: CWR-59313
REWRITE: 70424-navpod-pp5050-01-powerpod-pre-cut-f- Humminbird-1100-series
MPN: PP5050-01
UPC: 659988110906
ASIN: B07TSPJZTF
WSKU: NAVPP505001
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series
EX_NAME: NAVPOD PP5050-01 PRE-CUT POWERPOD FOR HUMMINBIRD 1100
PTITLE: NavPod PP5050-01 Pre-CUT PowerPod for Humminbird 1100 Series
TYPE: Boat outfitter | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD PP5050-01 powerpod pre-cut f/humminbird 1100 series

Gtags:

Boat
Automobile

GSpecs:

NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series Product Description PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series

PP5050 Series, PowerPods for power are a better option than support mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail soundt intended to be mounted on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on twinwheel boats.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external silicone seal plThick us with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We haveWe are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a brilliant, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Therelatest industry...

Frequently Asked Questions (FAQ) about NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series Who is the NavPod?
How to describe NavPod PP5050-01 PowerPod Pre-Cut f/Humminbird 1100 Series?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod PP5050-01 PowerPod Pre -Cut -Cut f/Humminbird 1100 series?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractiveness of our design makes the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5050-01 PowerPod Pre-Cut f/Humminbird 1100 Series? Compared torack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP5050-01 PowerPod Pre-Cut f/Humminbird 1100 Series? Dash

Save $120 when you purchase the NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series for only $389 b> from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP5050-01Pre-Cut PowerPod for Humminbird 1100 Series User ReviewsNavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return & return policy refund here.