NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black Boat Outfitting

PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black

PowerPods are designed to the serious boater who explodes offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubbyhole or aft end of the cockpit table, particularly on twin wheel boats.s.

High gloss material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material. It offers a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "defined compression" as manyrous rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NaClé vPod for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam isused to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all New NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63964
SKU: NVN-63964
CSKU: CWR-63964
REWRITE: 75075-navpod-pp5052-powerpod-pre-cut-f-raymarine-c90w-e90w
MPN: PP5052-C
UPC: 659988112603
ASIN : B082BC82YC
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black
br> NAME_EX: NAVPOD POWERPOD PRE-CUT FOR RAYMARINE C90W/E90W
PTITRE: NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5052 Pre-Cut PowerPod f/Raymarine C90W/E90W - Carbon Black

Gtags:

GSpecs:

NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black Product Description

PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black

PowerPods are designed for serious boaters who go offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface.under the cubbyhole or aft end of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with a co-custom ABS material coated with extruded acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The joint indull EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided connected to each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on design engineersExperienced in-house staff who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we're confident you'll enjoy years of trouble-free service and a long-lasting shine. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) aboutNavPod PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Carbon Black Who is the NavPod?
How to describe the NavPod PP5052 PowerPod Pre-Cut f/Raymarine C90W/E90W - Carbon Black?
Is it cut? or uncut?
How to mount or what is the mounting style of the NavPod PP5052 PowerPod Pre-Cut f/ Raymarine C90W/E90W - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include the watertight silicone seal, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black? Compared to rack installation, PowerPods for Power constitute a mbest choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP5052 PowerPod Pre-Cut f/Raymarine C90W/E90W - Carbon Black? Dash

Save $113 when you purchase the NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black for only $396 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5052 Pre-Cut PowerPod f/Raymarine C90W/E90W - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Stands
Seller:	NavPod
Cut/Uncut:	Cut
Edit Style:	Dashboard

NavPod PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Blackarbone User ReviewsNavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black Shipping & Return

For detailed shipping policy, please see our Shipping Policy and you can find our Return Policy and Refund Policy here.