NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black Boat Outfitting

PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black

All PowerPods Included :
ABS plastic with acrylic cap
Tamper proof chrome plated stainless steel fixtures
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Swivel base with large passage for cable harness

High gloss material

NavPods are made with custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system offerednt an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide nickel-chrome-plated stainless steel tamper-proof screws for moree safety combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced specialist in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on allthe new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63962
SKU: NVN-63962
CSKU: CWR-63962
REWRITE: 75073-navpod-pp5050-19-powerpod-pre-cut-f-garmin-gpsmap-7xx0- 7xx0xsv
MPN: PP5050-19-C
UPC: 659988112580
ASIN: B07XLPNNL8
WSKU: NAVPP505019C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR GARMIN 7410/7410XSV/7610/
PTITLE: NavPod PP5050- 19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

TAmazon itre:
NAVPOD Pp5050-19 powerpod pre-cut f/garmin 7xx0/7xx0xsv series - carb

Gtags:

Boat
Automobile

GSpecs:

NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black Product Description

PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black

All PowerPods include:
ABS plastic with acrylic cap
Chrome-plated stainless steel tamper evident closures
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Swivel base with large passage for wiring harness

The high gloss material

NavPods are made with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better rigiditystructural tee.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent tight seal between the front and the rear of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for better holding power whentightening than the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will enjoy years of trouble-free service et a shiny and durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently Asked Questions (FAQ) about the NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black Who is the NavPod?
How to describe the NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP5050-19 PowerPod Pre-Cut f/Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, the manufacturing qualitytion and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5050-19 PowerPod Pre-Cut f/Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut

$120

NavPod PP5050-19 Pre-Cut PowerPod for Garmin GPSMAP 7xx0/7xx0xsv Series - Carbon Black

$389

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.