NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black Boat Outfitting

PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black

PowerPods are designed for the serious boater who blasts offshore He demands the most from his boat and its electronics He needs a strong, sturdy mount to protect vital electronics from the toughest offshore sailing conditions. secure, yet clean and attractive. More than 70 pre-cut PowerPods are available for all popular manufacturers' products. 1.8" opening in the swivel tube provides plenty of room to pass through. wires and connectors. PowerPods are positioned at a 20-degree rearward tilted viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on wheeled boats j

The high-gloss material

NavPods are made with a custom co-extruded ABS companion coated with acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is notnot subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We use all stainless steel mounting hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide tamper resistant nickel chrome plated stainless steel screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to be able to count onExperienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience behind our belt, we're confident you'll enjoy years of trouble-free service and a shiny, long-lasting finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID : 63960
SKU: NVN-63960
CSKU: CWR-63960
REWRITE: 75071-navpod-pp5050-01-powerpod-pre-cut-f-humminbird-1100-series
MPN: PP5050 -01-C
UPC: 659988112566
ASIN: B07XVCN1XG
WSKU: NAVPP505001C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD for HUMMINBIRD 1100 SEIES 10.4"/
PTITLE: NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
br>

NavPod PP5050-01 PowerPod Pre-Cut f/Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black

Gtags:

GSpecs:

NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black Product DescriptionPP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black /b>
PowerPods are designed for serious boaters who cruise offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.
PowerPods for Sail are intended to be mounted ona flat surface. Maybe under the vehicle or in the back. end of the cockpit table, especially on twin-wheel boats. The glossy material NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
Leak-proof seal
All NavPods are made with a double seal system providing excellent Sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The jInternally anointed EPDM is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.
Nickel plated chrome screws
We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!
The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineersnties who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about the Powe NavPod PP5050-01Pre-Cut rPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black Who is the NavPod?
How to Describe NavPod PP5050-01 Pre-Cut PowerPod f/Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod PP5050-01 PowerPod Pre-Cut f/Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available.l Features of all NavPods include waterproof silicone seal, tamper-evident clips for added security and convenience, concealed wiring and clean installation for easy access How to Describe the NavPod PP5050-01 PowerPod Pre-. Cut f/Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black? ByCompared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut

$120

NavPod PP5050-01 Pre-Cut PowerPod for Humminbird 1100 Series 10.4"/1199ci/1159ci - Carbon Black

$389

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Cut/Uncut:	Cut
Mount Styleage:	Dash

For detailed shipping terms, please see our Shipping Policy and you will find our Returns & Refund Policy here.