NavPod PP5058 Pre-Cut PowerPod f/Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black Boat Outfitting
PP5058 Pre-Cut PowerPod for Lowrance MFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black
The PP5050 Series, PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.
The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.
PowerPods for Sail are intended to be mounted on a flat surfacee. Perhaps under the hood or aft of the cockpit table, especially on twin wheel boats.
The Hi-Gloss Material
NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
The waterproof seal
All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The sealInternal EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.
Nickel-chrome plated screws
We We use all stainless steel mounting hardware that comes with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!
The manufacturing process
Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on international design engineersExperienced ernes who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will have years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.
Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63967
SKU: NVN-63967
CSKU: CWR-63967
REWRITEE: 75078-navpod-pp5058-powerpod-pre-cut-f-lowrance-mfd-hds-12
br> MPN: PP5058-C
UPC: 659988112658
ASIN: B0753J5B9D
WSKU: NAVPP5058C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5058 Pre-Cut PowerPod for Lowrance MFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Black carbon
EX_NAME: NAVPOD PRE-CUT POWERPOD FOR LOWRANCE HDS-12 MFD GEN2 TOUCH
PTITLE: NavPod PP5058 Pre-Cut PowerPod for LowranceMFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5058 PowerPod Pre-Cut f/Lowrance MFD HDS- 12 Gen2 Touch & HDS-12 Gen3 - Carbon Black - PP5058-C
Gtags:
GSpecs:
NavPod PP5058 Pre-Cut PowerPod for Lowrance MFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black Product Description
PP5058 Pre-Cut PowerPod for Lowrance MFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black
The PP5050 series, PowerPods for power, are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.
The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from damage.deterioration caused by prolonged UV exposure.
PowerPods for Sail are intended to be mounted on a flat surface.as. Perhaps under the hood or aft of the cockpit table, especially on twin wheel boats.
The high gloss material
NavPods are made with custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.
The waterproof seal
All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditionsdifficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.
Chrome-plated nickel screws
We use All stainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!
The manufacturing process
Large caliber thermoforming is considered an art since many processes come into play.beginning with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our commitment to quality
We are committed to producing the best waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.
Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can give a stylish appearance.puree for an integrated installation.
Frequently Asked Questions (FAQ) about NavPod PP5058 Pre-Cut PowerPod for MFD Lowrance HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black Who is it NavPod?
How to describe the NavPod PP5058 Pre-Cut PowerPod f/Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black?
Is it cut or uncut?
How to describe or what is the mounting style of the NavPod PP5058 PowerPod Pre-Cut f/Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and easy installation.n clean for easy access. How to describe the NavPod PP5058 Pre-Cut PowerPod f/Lowrance MFD HDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut
- How to mount or what is the mounting style of NavPod PP5058 PowerPod Pre-Cut f/Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black? Dash
Save $120when you purchase the NavPod PP5058 Pre-Cut PowerPod for MFD LowranceHDS-12 Gen2 Touch and HDS-12 Gen3 - Carbon Blackfor only $389at NVN Marine! Same day dispatch before 3 p.m. NavPod PP5058 Pre-Cut PowerPod f/Lowrance MFD HDS-12 Gen2 Touch & HDS-12 Gen3 - Carbon Black Technical Specifications
| Type: | Boat Outfitter | Sdisplay supports |
|---|---|
| Vendor: | NavPod |
| Cut/Uncut: | Cutted |
| Edit Style: | Dash |
For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here .
- NavPod PP5057 Pre-Cut PowerPod for Garmin 4010 and 4210
- NavPod PP5056 Pre-Cut PowerPod for Garmin GPSMAP 6008 and 6208
- NavPod PP5055 Pre-Cut PowerPod for Garmin GPSMAP 5012 and 5212
- NavPod PP5053 Pre-Cut PowerPod f/Furuno MFD8 NavNet 3D - Carbon Black
- NavPod PP5053 Pre-Cut PowerPod for Furuno MFD8 NavNet 3D
- NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W
- NavPod PP5052 Pre-Cut PowerPod for Raymarine C90W/E90W - Carbon Black
