NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3 Boat Outfitting

PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3

PP5050 series, PowerPods for power supply are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the hood orrear of the cockpit table, especially on twin wheel boats.

The glossy material

NavPods are manmade with ABS material covered in custom co-extruded acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The EPDM internal seal is now50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all staNo steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on experienced in-house design engineersés who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Compared with When installing in a rack, the PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in...
PRODUCT ID: 59224
SKU: NVN-59224
CSKU: CWR-59224
REWRITE: 70335-navpod-pp5058-powerpod-pre-cut-for - lowrance-hds-12
MPN: PP5058
UPC: 659988107456
ASIN: B01GKCR4S2
WSKU: NAVPP5058
SSKU:
KSKU: NPDPP5058
GSKU:
MSKU :
LSKU:
NAME: NavPod PP5058 Pre-cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3
EX_NAME: NAVPOD PP5058 PRE-cut POWERPOD for LOWRANCE HDS-12 MFD GEN2
PTITLE : NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3
TYPE: Boat Equipment | Display Stands
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS -12 Gen3

Gtags:

GSpecs:

NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3 Product Description PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3

The PP5050 Series, the PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for SGarlic are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external silicone seal plThick us with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We haveWe are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design element from each and incorporated them into each new Gen3 product.

Compared to rack installation, the PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in...

Frequently Asked Questions (FAQ) about NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3 Who is the NavPod?
How to describe the NavPod PP5058 PowerPod prcut out for Lowrance HDS-12 Gen2/HDS-12 Gen3?
Is it cut or uncut?
How to mount or what is it what is the mounting style of NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for an installationintegrated. Very suitable for installation in... Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP5058 PowerPod Pre-Cut for Lowrance HDS-12 Gen2/HDS-12 Gen3? Dash

Save $114 when you purchase the NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3 for only $395from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS-12 Gen2/HDS-12 Gen3 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	7.2 lbs
Cut/Uncut:	Couped
Mounting style:	Dash

NavPod PP5058 Pre-Cut PowerPod for Lowrance HDS -12 User Reviews Gen2/HDS-12 Gen3NavPod PP5058 PowerPod Pre-Cut for Lowrance HDS-12 Gen2/HDS-12 Gen3 Shipping & Returns

Shipping Weight:	7.2 lbs
Box sizes:	9.00 (h) x 14.00 (w) x 16.00 (w)
Cubic feet:	2016.0
Returnable :	Yes

For detailed shipping policy, please see our Shipping Policy and you can find our Return and Refund Policy here.