NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020 1020xs and 1040xs - Carbon Black Boat Outfitting

Pre-Cut PowerPod PP5201 for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black

PP5200 Series, PowerPods for Power are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base. The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure. PowerPods for Sail are intended to be mounted on a flat surface. Maybe under thedodger or aft of the cockpit table, especially on twin wheel boats.

Usable face: 9.85" H x 15.18" W

All PowerPods include:

ABS plastic with acrylic cap
Tamper-proof closures chrome-plated stainless steel
Double gasket for a perfect seal
Models are available pre-cut for popular electronic devices
Swivel base with large passage for cable harness

PowerPod PP5201 Pre-Cut Parts for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black PP5200 Series, PowerPods for Power is a better choice than installing a stand. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion mount that comes with most electronic devices is not the best choice. The advantage of PowerPods is that they can protect the arback of salt water electronic devices. Most manufacturers use sealed rubber buttons to perfectly protect the screen surface to prevent water intrusion. The back is generally not waterproof. They want you to install it directly into the console or NavPod. P.owerPod can also protect plastic connectors and wires from deterioration caused by long-term exposure to ultraviolet light. PowerPods for Sail are intended to be installed on a flat surface. Maybe the dodger or the stern on the cockpit table, especially on a two-wheeler. Available faces: 9.85" H x 15.18" W All PowerPods include:
PRODUCT ID: 63977
SKU: NVN-63977
CSKU: CWR-63977
REWRITE: 75088-navpod -pp5201-powerpod- precut-f-garmin-gpsmap-1020
MPN: PP5201-C
UPC: 659988112764
ASIN: B07XV8XJMK
WSKU: NAVPP5201C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black
NAME_EX: PRE-CUT NAVPOD POWERPOD FOR GARMIN 1020/1020XS/1040XS
PTITRE: NavPod PP5201 Pre-Cut PowerPod for Garmin min GPSMAP 1020, 1020xs and 1040xs - Carbon Black
TYPE: Boat equipment | Display Mounts
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5201 PowerPod Pre-Cut f/Garmin GPSMAP 1020, 1020xs & 1040xs - Carbon Black - PP5201-C

Gtags:

GSpecs:

NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black Product Description

PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black

PP5200 Series, PowerPods for power are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base. The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from damage caused by eprolonged exposure to UV rays. PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the Dodger or aft end of the cockpit table, especially on dual wheel boats.

Usable face: 9.85"H x 15.18" L

All PowerPods include:

Acrylic Cap ABS Plastic
Closures tamper-evident chrome-plated stainless steel
Double seal for watertight integrity
Models are available pre-cut for popular electronic devices
Swivel base with large passage for the cable harness

PP5201 PowerPod Pre-cut parts for Garmin GPSMAP 1020, 1020xs and 1040xs-carbon black PP5200 series, PowerPods for Power is a better choice than installing 'a support. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion support providedwith most electronic devices is not the best choice. The advantage of PowerPods is that they can protect the back of electronic devices from salt water. Most manufacturers use sealed rubber buttons to perfectly protect the screen surface to prevent water intrusion. The back is generally not waterproof. They want you to install it directly into the console or NavPod. PowerPod can also protect plastic connectors and wires from deterioration caused by long-term exposure to ultraviolet light. PowerPods for Sail are intended to be installed on a flat surface. Maybe the dodger or the stern on the cockpit table, especially on a two-wheeler. Available Faces: 9.85" H x 15.18" W All PowerPods include:

Frequently Asked Questions (FAQ) About NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Blackne Who is the NavPod?
How to describe the NavPod PP5201 Pre-Cut PowerPod f/Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black?
Is it cut or not?
How to mount or what is the mounting style of the NavPod PP5201 PowerPod Pre-Cut f/Garmin GPSMAP 1020, 1020xs & 1040xs - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5201 PowerPod Pre-Cut f/Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black? PowerPod PP5201 Pre-Cut Parts for Garmin GPSMAP 1020, 1020xs and 1040xs - PP5200 Series Carbon Black,PowerPods for Power is a better choice than installing a stand. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion mount that comes with most electronic devices is not the best choice. The advantage of PowerPods is that they can protect the back of electronic devices from salt water. Most manufacturers use sealed rubber buttons to perfectly protect the screen surface. Carefully to prevent water intrusion. The back is generally not waterproof. They want you to install it directly into the console or NavPod. PowerPod can also protect plastic connectors and wires from deterioration caused by long-term exposure to ultraviolet light. PowerPods for Sail are intended to be installed on a flat surface. Maybe the dodger or the stern on the cockpit table, especiallyt on a two-wheeler. Available faces: 9.85" H x 15.18" W All PowerPods include:Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP5201 PowerPod Pre-Cut f/Garmin GPSMAP 1020, 1020xs & 1040xs - Carbon Black? Dash

Save $127 when you purchase the NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black for only $412from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020, 1020xs and 1040xs - Carbon Black User ReviewsNavPod PP5201 Pre-Cut PowerPod for Garmin GPSMAP 1020 , 1020xs and 1040xs - Carbon Black Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.