NavPod PP5202 Pre-Cut PowerPod f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black Boat Outfitting

PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black

PP5200 Series, PowerPods for power supply are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base. The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure. PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the dodgeror on the back of the cockpit table, especially on twin wheel boats.

All PowerPods include:

Acrylic coated with ABS plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double-sealed for waterproof integrity
Templates are available pre-cut for popular electronic devices
Swivel base with large cable harness pass-through

The glossy material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providingexcellent sealing between the front and back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker external silicone seal with flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide nickel-chrome-plated stainless steel tamper-proof screws for added security ccombined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since Many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machine production centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best seal possible. housing for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will respect our commitment by now offering a guarantee of 10 years on all new NavPods Gen3.

PP5202 Pre-cut PowerPod for Simrad NSS12 evo2 / B&G Zeus2 12-carbon black PP5200 series, PowerPods for power supply are a better choice than installation on support. PowerPods provide...
PRODUCT ID: 63978
SKU: NVN-63978
CSKU: CWR-63978
REWRITE: 75089-navpod-pp5202-powerpod-pre-cut-f-simrad - nss12-evo2-b-g
MPN: PP5202-C
UPC: 659988112771
ASIN: B0753HM2L9
WSKU: NAVPP5202C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5202 Pre-Cut PowerPod f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR SIMRAD NSS12 EVO2/B&G ZEUS2 12
PTITLE: NavPod PP5202 Pre-Cut PowerPod f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod PP5202 PowerPod Pre-Cut f/Simrad NSS12 evo2/BG Zeus2 12 - Carbon Black

Gtags:

GSpecs:

NavPod PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black Product Description

PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black

PP5200 Series, PowerPods for power are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base. The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged exposure.UV protected. PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the fuel table, especially on twin wheel boats.

All PowerPods include:

Acrylic capped ABS plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Swivel base with large cable harness pass-through

High gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better rigiditystructural.

The waterproof seal

All NavPods are manufactured with a double seal system providing excellent sealing between the front and rear of the NavPod for protection of your marine electronics. NavPods are designed to withstand harsh wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for better holding power when tighteningrage than the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and ashiny and durable. We will honor our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

PP5202 Pre-cut PowerPod for Simrad NSS12 evo2 / B&G Zeus2 12-carbon black PP5200 series, the PowerPods for power delivery are a better choice than mounting on a stand. PowerPods provide...

Frequently Asked Questions (FAQ) about NavPod PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black Who what is the NavPod?
How to describe the power of the NavPod PP5202Pod Pre-Cut f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black?
Is it cut or uncut?
br/> How to mount or what is the mounting style of the NavPod PP5202 PowerPod Pre-Cut f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, the manufacturing qualityon and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5202 PowerPod Pre-Cut f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black? PP5202 Pre-cut PowerPod f / Simrad NSS12 evo2 / B&G Zeus2 12-carbon black PP5200 series, PowerPods for power supply are a better choice than stand installation. PowerPods provide clean...Is it cut or not? Cut How to mount or what is the mount navigation style of the NavPod PP5202 Pre-cut PowerPod f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black? Dash

Save $127 when you purchase the NavPod PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black for only$412 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5202 Pre-Cut PowerPod f/Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Dash

NavPod PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black User ReviewsNavPod PP5202 Pre-Cut PowerPod for Simrad NSS12 evo2/B&G Zeus2 12 - Carbon Black Shipping & Return

For more detailed Shipping Policy, please see our Shipping Policy and you can find our Return & Refund Policy here.