NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 Boat Outfitting

PP5213 Pre-Cut PowerPod for Raymarine GS125

PowerPods are designed for serious offshore boaters. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

Sail PowerPods are intended to be mounted on a flat surface Perhaps under the cubby or aft end of the cockpit table, particularly on twin wheel boats.

Matehigh gloss riau

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a very high shine. White stainless steel finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "defined compression" likemany rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for a better hold. Greater tightening capacity when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catiaand AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 63982
SKU: NVN-63982
CSKU: CWR-63982
REWRITE: 75093-navpod-pp5213-powerpod-pre-cut-f-raymarine- gs125
MPN: PP5213
UPC: 659988111668
ASIN: B082B8R4Y2
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5213 Pre-cut PowerPod for Raymarine GS125
EX_NAME: NAVPOD PRE-CUT POWERPOD FOR RAYMARINE GS125
PTITRE: NavPod PP5213 Pre-cut PowerPod for Raymarine GS125
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5213 PowerPod Pre-Cut for Raymarine GS125

Gtags:

GSpecs:

NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 Product Description

PP5213 Pre-Cut PowerPod for Raymarine GS125

PowerPods are designed for the boater seriousness that explodes wide. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubbyhole or aft end of the cock table.pit, especially on dual wheel boats.

High gloss material

NavPods are made with co-extruded ABS material customized with acrylic cap.the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large Round Head Tamper Proof screws have deeper sockets for the NavPod wrench for better holding capacity when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such asSolidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will stay true to our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...

Frequently asked questions (FAQ) about the NavPod PP5213 Pre-cut PowerPod for Raymarine GS125 Who is the NavPod?
How to describe the NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125?
Is it cut or not?
How to mount or what is the mounting style of the NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for integrated installation.ree. The latest industry...Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125? Dash

Save $119 when you purchase the NavPod PP5213 Pre-Cut PowerPod for Raymarine GS125 for only $420 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP5213 Pre-Cut PowerPod f/Raymarine GS125 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Dash

NavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125 User reviewsNavPod PP5213 PowerPod Pre-Cut f/Raymarine GS125 Shipping and returns

For know the detailed shipping policy, please check our shipping policy et you can find our return and refund policy here.