Newmar 12-12-35I DC Converter Electrical

12-12-35I DC Converter

This isolated series provides voltage conversion as well as input/output isolation, allowing the use of power equipment negative mass in a positive or floating mass. battery systems, or vice versa.

Using an isolated converter as a voltage stabilizer on 12 or 24 volt systems can solve the problems of conducted noise and interference on sensitive DC-powered communications, power systems. navigation and devices based on a DC microprocessor.

Features:

Wide input voltage range
Precise output voltage regulation
Reverse polarity
Input fuse/output fuse
Total input/output isolation, pos. or negative. ground
Current limiting, short circuit resistant output
Automatic thermal shutdown reset
High/low input voltage shutdown
Polyurethane coating on PC board
Power on light
Rugged housing designed for high vibration applications

Specifications:

Input voltage: 10-16
Maximum Input Amps: 56
Output Voltage: 13.6
Output Amps (Intermittent): 35
Output Amplifiers (Continuous) : 20
Case size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)
Weight: 12 lbs. (5.5 kg)
Output: 13.6 VDC (internally adjustable from 12.6 to 14.5) or 24.5 VDC (or specify)
Ripple: 150 mV P-P maximum
Regulation: 1% line/load
Duty cycle ratings: Intermittent – 20 minutes maximum operation, 20% duty. current limit set at approx. 105% of the intermittent rate. Continuous – 24 hours, 100% duty
Standing current: less than 100 mA (including power indicator "ON")
Operating temperature: 0 to 50 degrees C, linear derating from 100% at 40 degrees C to 50% at 50 degrees C. Thermal shutdown at 70 degrees C Case temperature
Switching frequency: 40 kHz
Efficiency: 85% – typical
Isolation – Output/Chassis; Input/Chassis: 250 VDC

Mechanical specifications:

Anodized aluminum heat sink housing
Front Panel Terminal Block
Heavy Duty Mounting Flange
Conformal Coated PC Board

Options:

Operation as battery charger or redundant parallel operation* – derating to continuous duty (contact factory)
Mounting kit for extreme vibration. (Information below)

Option: Extreme vibration mounting kit

Extreme vibration mounting kit is availableble to protect NEWMAR power converters from extreme conditions. shock and vibration stresses when fitted to high vibration vehicles.

The kit replaces the standard vibration kit supplied with the unit and fits into the mounting flange of the unit to act as a "super shock absorber" for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify kit L for units weighing 2 to 15 lbs. and Kit H for units weighing between 16 and 70 lbs.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102293
SKU: NVN-102293
CSKU: CWR-102293
REWRITE : 113404 -newmar-12-12-35i-DC-converter
MPN: 12-12-35I
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: CONVENEWMAR 12-12-35I DC Roaster
NAME_EX:
PTITLE: Newmar 12-12-35I DC Converter
TYPE: Electric | DC to DC Converters
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Newmar 12-12-35I DC Converter Product Description

12-12-35I DC Converter

This isolated series provides voltage conversion as well as input/output isolation output, allowing the use of negative ground equipment in positive or floating ground battery systems, or vice versa.

Features:

Wide input voltage range
Precise output voltage regulation
Reverse polarity
Input fuse/output fuse
Total input/output isolation, pos. or negative. ground
Current limiting and short circuit resistant output
Automatic thermal shutdown reset
High/low input voltage shutdown
Polyurethane coating on PC board
Light voltage
Robust housing designed for high vibration applications

Specifications:

Voltage Input: 10-16
Max. input amps. : 56
Output voltage: 13.6
Output amps (intermittent): 35
Output amps (continuous): 20
Case Size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)
Weight: 12 lbs ( 5.5 kg)
Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)
Ripple: 150 mV Maximum P-P
Regulation: 1% line/load
Duty cycle ratings: Intermittent – 20 minutes maximum time, 20% duty. current limit set at approx. 105% of the intermittent rate. Continuous – 24 hours, 100% service
Currentquiescent: less than 100 mA (including power indicator "ON")
Operating temperature: 0 to 50 degrees C, linear derating from 100% to 40 degrees C to 50% at 50 degrees C. Thermal shutdown at 70 degrees C Case temperature
Switching frequency: 40 kHz
Efficiency: 85% – typical
Isolation – Output/Chassis; Input/Chassis: 250 VDC

Mechanical specifications:

Anodized aluminum heat sink housing
Front panel terminal block
Heavy-duty mounting flange
Conformal coated electronics board

Options:

Operation as battery charger or redundant parallel operation* – derating to continuous operation (contact factory)
Mounting kit for extreme vibration. (Information below)

Option: Extreme Vibration Mounting Kit

The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from extreme conditions. shock and vibration stresses when fitted to high vibration vehicles.

The kit replaces the standard vibration kit supplied with the unit and fits into the mounting flange of the unit to act as a "super shock absorber" for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify Kit L for units weighing 2 -15 pounds. and Kit H for units weighing between 16 and 70 lbs.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $527 when you purchase the Newmar 12 -12- 35I DC Converterfor only $1,419 from NVN Marine! Same day dispatch before 3 p.m.Newmar 12-12-35I DC Converter Technical Specifications

Type:	Electric \| DC to DC Converters
Supplier:	Newmar Power

User Reviews of Newmar 12-12-35I DC ConverterNewmar 12-12-35I DC Converter Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.