Newmar 32-12-25 DC Converter Bestsellers
32-12-25 DC Converter
Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative mass systems. (See isolated series for positive ground applications.)
Features:
- Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
- Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long product life. components
- Compliant polyurethane coating on PC Corrosion-resistant anodized aluminum boards and enclosures with rugged shock mounts ensure survival in harsh environments.
Numerous conversion andload protection:
- Current limitation
- Automatic thermal shutdown
- Short circuit resistant
- Reverse polarity
- Overvoltage protection
- CE marked
Specifications:
- Input voltage: 20-50
- Output voltage: 13.6
- Output amps (intermittent): 25
- Amplifiers output (continuous): 20
- Case size (H x W x D): 6.0 x 4.7 x 14.0 inches (15.2 x 11.9 x 35.6 centimeters )
- Weight: 7.5 lb (3.4 kg)
- Output: 13.6 VDC (internally adjustable from 12.6 to 14.5) or 24.5 VCC (or specify)
- Ripple: 150 mV P-P maximum
- Regulation: 1% line/load
- Switching frequency: 40 kHz
- Efficiency: 85% – typical.
- Isolation: output/chassis; Input/Chassis: 250 VDC
Duty Cycle Ratings*:
- Intermittent: 20 minutes of operationmaximum charge, 20% service. current limit set at approx. 105% intermittent.
- Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
- Standing current: less than 100 mA (including power indicator "ON")
Operating temperature specifications:
- 0-50 degrees C, linear derating from 100% at 40 degrees C Up to 50% at 50 degrees C.
- Thermal shutdown at 70 degrees C housing temperature
- Model 24-12-3: Full output -25 to +30°C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C
Mechanical specifications:
- Powder Coated aluminum heatsink enclosure
- Front panel terminal block
- Robust mounting flange
- Compliant coated PC card
Options:
- Operation as battery charger or redundant parallel operation* – derating up tou'continuous operation (contact factory)
- Mounting kit for extreme vibrations. (Information below)
Option: Extreme Vibration Mounting Kit
Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the unit and fits into the unit's mounting flange to act as a "super shock absorber" for the electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for units weighing between 16 and 7 lbs.
This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.PRODUCT ID: 102304
SKU: NVN-102304
CSKU: CWR-102304
REWRITE: 113415 -newmar-32-12-25-dc- converter
MPN: 32-12-25
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU :
NAME: NEWMAR DC CONVERTER 32-12-25
NAME_EX:
PTITLE: Newmar DC Converter 32-12-25
TYPE: Electric | DC to DC Converters
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Gtags:
GSpecs:
Newmar 32-12-25 DC Converter Product Description
32-12-25 DC Converter
Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative ground systems. (See isolated series for positive ground applications.)
Features:
- Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
- Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long product life. components
- Compliant polyurethane coating on PC Corrosion-resistant anodized aluminum boards and enclosures with rugged shock mounts ensure survival in harsh environments.
Extensive load conversion and protection circuits:
- Current limiting
- Automatic thermal shutdown
- Short-resistant -circuits
- Reverse polarity
- Overvoltage protection
- Carries CE marking
Specifications:
- Input voltage: 20-50
- Output voltage: 13.6
- Output amps (intermittent): 25
- Output amps (continuous): 20
- Case size (H x W x D): 6.0 x 4.7 x 14.0 inches (15.2 x 11.9 x 35.6 centimeters)
- Weight: 7.5 lb (3.4 kg)
- Output: 13.6 V DC (internally adjustable from 12. 6 to 14.5 ) or 24.5 VDC (or specify)
- Ripple: 150 mV P-P maximum
- Regulation: 1% line/load
- Frequency switching: 40 Khz
- Efficiency: 85% – Typical.
- Isolation: Output/Chassis; Input/Chassis: 250 VDC
Duty Cycle Ratings*:
- Intermittent: 20 minutes maximum operation, 20% duty . current limit set at approx. 105% intermittent.
- Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
- Standing current: less than 100 mA (including power indicator "ON")
Operating temperature specifications:
- 0-50 degrees Celsius, linear derating from 100% at 40°C to 50% at 50°C.
- Thermal shutdown at one case temperature 70°C
- Model 24-12-3: full output from -25 degrees to +30 degrees C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C
Mechanical specifications:
- Powder Coated aluminum heatsink enclosure
- Front panel terminal block
- Robust mounting flange
- Compliant coated PC card
Options:
- Operation as a battery chargerie or redundant parallel operation* – derating to continuous operation (contact factory)
- Extreme vibration mounting kit. (Information below)
Option: Extreme Vibration Mounting Kit
Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the unit and fits into the unit's mounting flange to act as a "super shock absorber" for the electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for units weighing between 16 and 7 lbs.
This product cannot be returned to the original point of purchase. Please contact didirectly the manufacturer in the event of a problem or concern.Save $241 when you purchase the Newmar 32-12 - 25 DCfor only $666 from NVN Marine! Same day dispatch before 3 p.m. Newmar 32-12-25 DC Converter Technical Specifications
Type: | Electric | DC to DC Converters |
---|---|
Supplier: | Newmar Power |
Weight: | 7.95 lbs |
Shipping Weight: | 7.95 lbs |
---|---|
Box sizes: | (h) x (l) x (l) |
Cubic feet: | 0 |
For detailed shipping policy, please see our shipping policy and you will find our Polireturn and refund tick here.
- Newmar 32-12-15 DC-DC Converter 20-50VDC to 13.6 Vdc @ 15A
- Newmar 32-12-15 DC Converter
- Newmar 32-12-10 DC-DC Converter 20-50VDC to 13.6 Vdc @ 10A
- Newmar 32-12-10 DC Converter
- Newmar 30 A single pole circuit breaker with black jet
- Newmar 30 A double pole circuit breaker with black jet
- Newmar 25 A single pole circuit breaker with black jet