Newmar BI-100 Battery Integrator Bestsellers
BI-100 Battery Integrator
Charging multiple battery banks without using diode isolators requires the batteries to be connected or "integrated" only when charging voltage is present. that they can be charged simultaneously, then disconnected or "isolated" when the charging voltage is no longer present to allow selective discharge and prevent the secondary or backup battery from draining into the main battery.
Battery integrators perform this function automatically, acting as a "smart" switch to connect independent battery banks only when a charging voltage is present. Otherwise, they are isolated and discharging between banks is prevented.
The battery integrator causes no voltage drop in the charging system, while the multiple batteries are charged as a single bank each once aA charging source of approximately 13.2 VDC or 26.4 VDC or greater is present (depending on model).
When the alternator or charger is turned off or a large load drops the voltage below the disconnection point, the unit breaks the common link between the banks. This allows for selective battery discharge and prevents "spill" from a more charged battery into a less charged battery. The unit can also be activated remotely to connect other batteries via the key starter or manual switch to provide an additional "boost" from the secondary battery whenever the starter is engaged and the unit detects that There is sufficient voltage in this battery to provide assistance. .
Features:
- Allows two separate banks to be charged without voltage drop while maintaining 100% isolation at all other times. For systems of three or more groups, one unit sadditional must be installed for each additional group.
- Heavy duty silver plated contactor, continuous duty rated at 100A or 200A depending on model
- Voltage sensing circuits, encapsulated solenoids epoxy and heavy-duty continuous current solenoids are all designed for use in the marine environment.ironments
- The 12 volt, 100 amp model has an ignition protection rating
- Has an ignition protection rating
- Easy three-wire connection for two-bank systems (BATT+, BATT+, GROUND)
- Terminal for optional wiring Remote lighting indicating when batteries are integrated
- Optional internal connections can be wired via the key start or hand override switch, attaching the battery banks together for an extra boost when starting the engine
Specifications:
- Terminals: Battery Connections: 5/16" Copper Alloy Stud
- Approvals: CE Marking
- Dimensions (H x W x P): 100 A Models: 3 x 3.25 x 2.5 inches
- Weight: 1 lb.
- Operating Temperature: Control: -40 to +85 degrees C and solenoid: -28 to +48 degrees C
- Voltage: 12 VDC
- Battery integration point: 13.2 VDC
- Battery disconnect point : 12.8 VDC
- Max. Continuous Current: 100A
- Maximum Peak Current: 400A
PRODUCT ID: 102311
SKU: NVN-102311
CSKU: CWR-102311
REWRITE: 113422-newmar-bi-100-battery-integrator
MPN: BI-100
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR BI-100 BATTERY INTEGRATOR
NAME_EX:
PTITLE: Newmar BI-100 Battery Integrator
br>TYPE: Electric | Battery Management
SELLER: Newmar Power
VEHICLES & PARTSS> VEHICLE PARTS AND ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES
Gtags:
GSpecs:
Newmar BI-100 Battery Integrator Product Description
BI-100 Battery Integrator
Charging multiple battery banks without using diode isolators requires that the batteries are connected or "integrated". only when a charging voltage is present so that they can be charged simultaneously and then disconnected or "isolated" when the charging voltage is no longer present to allow selective discharge and prevent the secondary or backup battery from vacuum in the primary battery.
Battery integrators perform this function automatically, acting as a "smart" switch to connect independent battery banks only when a charging voltage is present. Otherwise, they are isolated and discharge between banks is prevented.
The battery integrator causes no voltage drop in the charging system, while the multiple bankstteries are charged as a single bank whenever a charging source of approximately 13.2 VDC or 26.4 VDC or more is present (depending on model).
When the alternator or the charger is turned off or a heavy load causes the voltage to drop below the disconnect point, the unit breaks the common link between the banks. This allows for selective battery discharge and prevents "spill" from a more charged battery into a less charged battery. The unit can also be activated remotely to connect other batteries via the key starter or manual switch to provide an additional "boost" from the secondary battery whenever the starter is engaged and the unit detects that There is sufficient voltage in this battery to provide assistance. .
Features:
- Allows two separate banks to be charged without voltage drop while maintaining 100% isolation from any otherth moment. For systems with three or more groups, an additional unit must be installed for each additional group.
- Heavy duty silver plated contactor, continuous duty rated at 100A or 200A depending on model
- Voltage sensing, epoxy encapsulated, heavy-duty DC circuitryAtés solenoids are all designed for use in marine environments.
- The 12 volt, 100 A model has a rating against inflammation
- Has an ignition protection rating
- Easy three-wire connection for two bench systems (BATT +, BATT +, GROUND)
- Terminal for optional wiring of remote lighting to indicate when battery banks are integrated
- Optional internal connections can be wired via key start or hand override switch, connecting the batteries together for an extra boost when starting the engine
Specifications:
- Terminals: Battery Connections: 5/16 inch copper alloy stud
- Approvals: CE Mark
- Dimensions (H x W x D): 100 A Models: 3 x 3.25 x 2.5 inches
- Weight: 1 lb.
- Operating Temperature: Control: -40 to +85 degrees C and Solenoid: -28 to +48 degrees C
- Voltage: 12V DC
- Point d Battery integration: 13.2 VDC
- Battery disconnect point: 12.8 VDC
- Max. Continuous Current: 100 Amps
- Maximum Peak Current: 400 Amps
Save $62 when you purchase the Newmar BI-100 Battery Integrator for only $179 from NVN Marine! Same day dispatch before 3 p.m. Newmar BI-100 Battery Integrator Technical Specifications
| Type: | Electric | Battery Management |
|---|---|
| Vendor: | Newmar Power |
