Newmar PT-14W battery charger Automotive/RV

PT-14W Battery Charger

Newmar Phase Three battery chargers use "smart" battery charging technology for 12-volt systems onboard applications navies, including work boats, military ships, commercial ships. ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a durable white powder coat finish, and the circuitry inDulls are coated with polyurethane for maximum corrosion resistance.

Features:

The "smart" circuit allows charging in three stages : bulk, absorption, float
Gel-Flooded/AGM cell/lead-acid battery type switch selects optimal charge/flood voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limiting prevents damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and pickled internal circuitry
Protection:Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VCA Input (50-60 Hz.): 85-264
Full Load Input Current: @ 115 VAC: 2.8, at 230 VAC: 1.4
P.F. Rating: 0.93 at 230V and 0.98 at 115V
Maximum Output Amplifiers: 14
Output Banks: 3
Battery Capacity (amp-hours): 28-140
Temp. Nominal number: T-2
Case size reference: A-2
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Optionequalization: Yes
Output indicator reference: M-3
Compliance reference: CG, CE

Temperature classification references:

Temperature: -10 degrees C to +60 degrees C
100% linear reduction at 40 degrees C to 60 % at 60 degrees C

Rated output voltage at Freeze/Flood switch settings (without Temperature Compensation):

Gel-Cell: 14.0 VDC Charge at 50% load and 13.6 VDC Float at 0.5 A load
Flooded/AGM: 14.2 VDC Charge at 50% load and 13 .4 VDC Float to .5 A Load

Compliance References:

CG: USCG CFR 183.410 (protected against ignition)
CE: bears the CE mark
ABS: the PT series complies with SVR 2009 4-8-3/5.9 standards, rules for less than 90 meters 2006 4-6-4/7.19 and HSNC 2007 4-8-3/ 5.13.

Options:

Panel remote, RP model, for use with all models except PT-7 and PT- 40U (LEDs indicate charger output stage. Manual reset of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3 ″H x 4.75″W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102327
SKU: NVN-102327
CSKU: CWR-102327
REWRITE : 113438 -newmar-pt-14w-battery-charger
MPN: PT-14W
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: LSKU:
NAME: NEWMAR PT-14W BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-14Wger Battery Tank
TYPE: Automotive/RV | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs :

Product Description of the Newmar PT-14W Battery Charger

PT-14W Battery Charger

Newmar Phase Three Series battery chargers use "battery charging technology" intelligent" for 12 volt systems on board ships. applications including workboats, military vessels, commercial vessels and pleasure craft. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a fdurable white powder coated finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

Circuits "smarts" provide three ge charging – bulk, absorption, float
Gel cell/flooded lead-acid/AGM battery type switch selects optimal charging/floating voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limiting prevents damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip screenion and marinated internal circuits
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and l power supply

Specifications:

VCA input (50-60 Hz.): 85-264
Input Current at Full Load: @ 115 VAC: 2.8, at 230 VAC: 1.4
P.F. Rating: .93@230V and .98 at 115V
Maximum Output Amps: 14
Output Banks: 3
Battery Capacity (Amps -hours): 28-140
Temp. of operation. Nominal number: T-2
Case size reference: A-2
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor model: TCS-12/24
Remote Panel Model: RP
Equalizer Option: Yes
Output Meter Reference: M-3
Conformity reference: CG, CE

Temperature classification references:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 40 degrees C to 60% at 60 degrees C

Rated output voltage at Gel switch settings /Flooded (No Temperature Compensation):

Gel-Cell: 14.0 VDC charge at 50% load and 13.6 VDC float at 0 load, 5 A
Flooded/AGM: Loading 14.2 V DC at 50% load and 13.4 V DC floating at 0.5 A load

Conformity references:

CG: USCG CFR 183.410 (Protected against ignition)
CE: bears the CE mark
ABS: PT series complies with SVR 2009 4-8-3/5.9, under 90 meters rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage Manual reset of a three-stage charge cycle With 25′ of cable Panel dimensions: 3″ H x 4.75″ W )

This. Product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $213 when you purchase the Newmar battery PT-14W Chargerfor only $586 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-14W Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-14W Battery Charger User ReviewsN Battery Chargerewmar PT-14W Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.