Newmar PX-3 junction box Bestsellers
PX-3 Junction Box
This waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spraying.
Connector strips installed in boxes
Molded nylon wraps pairs of connectors that use screw compression to secure the wires without using terminals. Ideal for electronic installations. The brass barrels capture the wires and are held in place with a stainless steel "finger" compressed by a screw. The screw does not come into contact with the wires, protecting the copper strands from cuts and breaks and meeting ABYC standards.
Features:
- Similar to BX series junction boxes but made from rugged, non-corrosive, impact resistant polypropylene
- Snap-on cover provides a tight seal
- Custom cut "universal" graded Diameter cable entries accommodate a wide range of cables
- Multi-position connector strips with screw compression wire termination "captive" Once installed, see matrix below for connection strip specifications per box
- Multiple knockouts are provided for conduit access (in addition to cable entries)
- li>
- IEC Waterproof Rating: IP55 – "Water splashed in the jets against the housing from any direction shall have no harmful effects.
- Positions per strip: 9
- Maximum wire gauge: 16
- Number of cable entry ports: 7
- Number Number of cable entries installed: 7
- Replacement cable entries provided: 0
- Cable diameter range (inches): 0.14 to 0.99
- Cable diameter range (mm): 3.5 - 3.5 - 25.5
- Box size (inch): 4.45 x 4.45 x 2.29
- Box size (cm): 11.3 x 11.3 x 5.8
PRODUCT ID: 102416
SKU: NVN- 102416
CSKU: CWR-102416
REWRITE: 113527-newmar-px-3-junction-box
MPN: PX-3
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PX-3 JUNCTIONBOX
NAME_EX:
PTITLE: Newmar PX-3 Junction Box
TYPE: Electric | Accessories
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Gtags:
GSpecs:
Newmar PX-3 Junction Box Product Description
PX-3 Junction Box
This waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spraying.
Connector strips installed in boxes
Molded nylon wraps the pairs of connectors that use screw compression to secure wires without using terminals. Ideal for electronic installations. The brass barrels capture the wires and are held in place with a stainless steel "finger" compressed by a screw. The screw does not come into contact with the wires, protecting the copper strands from cuts and breaks and meeting ABYC standards.
Features:
- Similar to BX series junction boxes but made from tough, non-corrosive, impact resistant polypropylene
- LThe snap-on cover provides a tight seal
- Custom-cut "universal" grade Diameter cable entries accommodate a wide range of cables.
- Position connector strips multiple with "captive" compression screw terminals installed, see matrix below for connection strip specifications per box
- Multiple knockouts are provided for conduit access (in addition to conduit entries cables)
- IEC Waterproof Rating: IP55 – "Water sprayed against the enclosure from any direction shall have no harmful effects. »
Specifications:
- Number of connector strips: 2
- Positions per strip: 9
- Maximum wire gauge: 16
- Number of cable entry ports: 7
- Number of installed cable entries: 7
- Spare cable entries provided: 0
- Cable diameter range (inches): 0.14 to 0.99
- Cable Diameter Range (mm): 3.5 - 25.5
- Box Size (inch): 4.45 x 4.45 x 2.29
- Box size (cm): 11.3 x 11.3 x 5.8
Save $17 with the purchase of the Newmar PX-3 Junction Box for only $53 b> from NVN Marine! Same day dispatch before 3 p.m. Newmar PX-3 Junction Box TechnologyPhysical Specifications
| Type: | Electric | Accessories |
|---|---|
| Supplier: | Newmar Power |
For detailed shipping policy, please see our shipping policy and you can find our shipping policy return and refund here.
