Newmar PTMS-24-67 Loader System Electrical

PTMS-24-67 Charger System

The PTM Charger provides a significant improvement in system reliability by utilizing multiple independent charger modules that plug into the unit and in the event of a breakdown. occur in a module, the system continues to operate, thus being considered a "fault."

The system consists of a wall box which serves as the connection point for the AC input and battery output (3 banks) and contains three forward-facing power bays, each accommodating a 22.5 amp charger module that slides and locks into place, creating a 67 amp 24V charger . If a module failure occurs, a front panel indicator and alarm relay are activated and the system continues to operate on the other modules. A fourth bay houses the "smart" controller circuit which provides 3-stage charging, temperature compensation, power LEDsstatus of the system, alarm contacts and indicators. In the event of a controller failure, the charger will still operate at full power in floating voltage mode. The controller module is also configured for easy plug-in replacement in the field.

Ship operators appreciate this system approach to reliability and ease of maintenance, whereby a fault in one of the modules is easily identified and can be quickly replaced with an available spare unit or exchange unit from the factory, while the charging system and vessel continue to operate.

Reliability

Redundant, independent 22.5 amp charger modules increase reliability; a malfunction of one of them does not deactivate the charging system; the remaining modules continue to function.

Ease of maintenance:

Changing modules only takes a few minutesutes via a plug-and-play setup while the system continues to operate
No technical personnel required
No need to remove the charger box from the boat or disconnect any wiring
No inconvenience of power outage on the boat

Features:

three-way "smart" levelsloading; bulk, absorption, float
Battery type selector; gel cell, lead-acid, AGM
Temperature compensated output via sensor
24 volts; 22-67 amps
90-264 VAC, 50-60 Hz "universal" input - can be used anywhere in the world
Powder coated stainless steel housing
ABS approved as a redundant power system for essential services as well as a battery charger

Specifications:

Modules installed: 3
Maximum output amps: 67
Input ampsmaximum @ 115/230 VAC: 18/9
Dimensions: 20.9 x 10.9 x 8.8 inches (53.1 x 27.7 x 22.4 centimeters)
Weight (lbs/kg): 35/16

Input specifications:

Voltage/Frequency: 90 -264 VAC, 47-63 Hz, single phase; linear derating from 100% output at 105 VAC to 80% output at 90 VAC
Current: 18 to 120 VAC; 9 to 230 VAC
Power factor: 0.96 to 0.99
Efficiency: 85% typical

Specifications Output:

Output Amps: 67 total
Rated Charge/Float Voltage: Gel-Cell: 28.0 VDC at 50% load/27.2 at 0.5A load; Flooded/AGM: 28.4 to 50% load/26.8 to 5A load
Temperature compensation (optional): – 5 mV per cell per degree C (typical), requires optional sensor model TCS-12/24
Battery banks: 3 (Recommended battery type/capacity: Gel cell, flooded or sealed lead-acid, 120-600 A-H)

Status Indicators/Signals Outputs

Output OK, No Output, Check System, Battery Too Hot, Total Output Bar Graph, Check Points output voltage test, Contacts for optional remote alarm)

Temperature index

0-60 degrees C; linear derating from 100% output at 50 degrees C to 80% output at 60 degrees C)

Mechanical specifications:

Material of Housing: Powder Coated Stainless Steel
Weight: With three modules installed: 34 lbs/15.5 kg.
Empty: 16 lbs/7.3 kg.
Cooling: forced air per module

Individual module specifications:

Model: PTM-24-22 (24 volts)
Input voltage/frequency: 90 -264 VAC; 47-63Hz; linear derating from 100% output at 105 VAC to 80% output at 90 VAC
Input current: 3 amps at 230 VAC; 6 amps at 115 VAC
Output current : 22.5 amps maximum ground phase; 20 amps maximum sinking/floating
Power factor: 0.96 to 0.99
Efficiency: 85% typical
Protection characteristics : input fuse, output fuse, Current limiting, Overvoltage protection,
Cooling fan, Automatic thermal shutdown/recovery
Status indicators: Output OK/ FAULT
Weight: 6 lbs

Optional accessories:

Temperature compensation sensor: model TCS-12/24 with 25′ of cable

Compliances:

ABS type approved redundant power supply system for essential services and as a battery charger, UL recognized; E183223, Level 3
Safety: EN60950-1 USA, Canada, EU Radiated and Conducted EMI Cord: FCC Part 15 Level A; EN55022 Class A

This product cannot be returned to the point of purchaserigine. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102340
SKU: NVN-102340
CSKU: CWR-102340
REWRITE : 113451 -newmar-ptms-24-67-system-loader
MPN: PTMS-24-67
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PTMS24-67 LOADING SYSTEM
NAME_EX:
PTITLE: Newmar PTMS-24-67 Loader System
TYPE: Electric | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Product Description of the Newmar PTMS-24-67 Charger System

PTMS-24-67 Charger System

The PTM Charger provides a significant improvement in system reliability using multiple independent charger modules. which plug into the unit, and if a fault occurs in a module, the system continues to operate, thus being considered a "fault".

The system consists of a wall box which serves connectors point to the AC input and battery output (3 banks) and contain three front-facing power bays, each accommodating a 22.5 amp charger module that slides and locks into place, creating a 24-amp charger V of 67 amps. If a module failure occurs, a front panel indicator and alarm relay are activated and the system continues to operate on the other modules. A fourth bay houses the "smart" controller circuit which provides 3-stage charging, onetemperature compensation, system status LEDs, alarm contacts and indicators. In the event of a controller failure, the charger will still operate at full power in floating voltage mode. The controller module is also configured for easy plug-in replacement in the field.

Ship operators appreciate this system approach to reliability and ease of maintenance, whereby a fault in any of the modules is easily identified and can be quickly resolved. replaced with an available spare unit or factory exchange unit, while the charging system and vessel continue to operate.

Reliability

Redundant, independent 22.5A charger modules increase reliability; a malfunction of one of them does not deactivate the charging system; the remaining modules continue to function.

Ease of maintenance:

TheChanging modules takes just minutes via plug-and-play setup while the system continues to operate
No technical personnel required
No need to remove the charger case from the boat or disconnect any wiring
No inconvenience of power outage on the boat

Features:

Three-step "smart" charging; bulk, absorption, float
Battery type selector; gel cell, lead-acid, AGM
Temperature compensated output via sensor
24 volts; 22-67 amps
90-264 VAC, 50-60 Hz "universal" input - can be used anywhere in the world
Powder coated stainless steel housing
ABS approved as a redundant power system for essential services as well as a battery charger

Specifications:

Modules installed: 3
Amps de Maximum Output: 67
Maximum Input Amps @ 115/230 VAC: 18/9
Dimensions: 20.9 x 10.9 x 8.8 inches (53. 1 x 27.7 x 22.4 centimeters)
Weight (lbs/kg): 35/16

Input specifications:

Voltage/Frequency: 90-264 VAC, 47-63 Hz, single phase; linear derating from 100% output at 105 VAC to 80% output at 90 VAC
Current: 18 to 120 VAC; 9 to 230 VAC
Power factor: 0.96 to 0.99
Efficiency: 85% typical

Specifications Output:

Output Amps: 67 total
Charge/Float Voltage Rating: Gel Cell: 28.0 VDC at 50% load /27.2 at 0.5A load; Flooded/AGM: 28.4 to 50% load/26.8 to 5A load
Temperature compensation (optional): – 5 mV per cell per degree C (typical), requires optional sensor model TCS-12/24
Battery banks: 3 (Recommended battery type/capacity: Gel cell,lead-acid flooded or sealed, 120-600 A-H)

Status indicators/signals Outputs

Output OK, No output, Check System, Battery Too Hot, Total Output Bar Graph, Output Voltage Test Points, Contacts for Optional Remote Alarm)

Temperature Index

0-60 degrees C; linear derating from 100% output at 50 degrees C to 80% output at 60 degrees C)

Mechanical specifications:

Material of Housing: Powder Coated Stainless Steel
Weight: With three modules installed: 34 lbs/15.5 kg.
Empty: 16 lbs/7.3 kg.
Cooling: forced air per module

Individual module specifications:

Model: PTM-24-22 (24 volts)
Input voltage/frequency: 90-264 VAC; 47-63Hz; linear derating from 100% output at 105 VAC to 80% output at 90 VAC
Input current: 3 amps at 230 VAC; 6 amps at 115 VAC
Output current: 22.5 amps maximum ground phase; 20 amps maximum sinking/floating
Power factor: 0.96 to 0.99
Efficiency: 85% typical
Protection characteristics : input fuse, output fuse, Current limiting, Overvoltage protection,
Cooling fan, Automatic thermal shutdown/recovery
Status indicators: Output OK/ FAULT
Weight: 6 lbs

Optional accessories:

Temperature compensation sensor: model TCS-12/24 with 25′ of cable

Compliances:

ABS type approved redundant power supply system for essential services and as a battery charger, UL recognized; E183223, Level 3
Safety: EN60950-1 USA, Canada, Europe Radiated and Conducted EMI: FCC Part 15 Level A; EN55022 Class A

This productcannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $1,759 when you purchase the Newmar PTMS-24- 67for only $4,689 from NVN Marine! Same day dispatch before 3 p.m. Newmar PTMS-24-67 Charger System Technical Specifications

Type:	Electric \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PTMS-24-67 Charger System User ReviewsNewmar PTMS-24-67 Charger System Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.