Newmar PT40U 12V 40A Charger 115/230V Input Electrical
Phase Three Series 40A Battery ChargerThe "smart" charger for almost any applicationPhase Three's "Smart" battery charging technology lets you select the size, features and flexibility you need for virtually any applications from small pleasure craft to large pleasure boats. on board, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All modsThey are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT40U Attributes- Number of Banks: 3
- Application: Flooded, Frost, AGM
- Output Voltage: 12 Volts
- Input Voltage: 90 to 264 Volts
- Ampere Rating: 40 Amps Load
- Universality: Completely Universal
- Length (IN): 14.1 inches
- Width (IN): 9-1/2 inches
- Height (IN): 4 inches
- Intelligent circuitry allows for three-stage charging: -bulk, absorption, float.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- Current limitationant - prevents damage from overcharging.
- Charger status is clearly displayed with optional LED, ammeter or remote panel.
- Use as a power supply; can power non-battery loads in-line.
- Optional drip shield and marinized internal circuitry.
- Extensive safety and EMC compliance
- Limited warranty two years on parts and labor.nty
Three stage "smart" chargers
Stage three "smart" battery charging technology is now available in a wide range of power levels, allowing you to select the right size. , features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the charging process optimal three-stage that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector switch adjusts the output voltage to adapt to gel-Types cell/flooded lead-acid/AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers power levels Battery system rating from 14 to 950 amp hours
-
Battery type switchgel cell/flooded lead acid/AGM selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and EMC complianceDouble years of parts and labor warranty
Mmodels
| 12 Volts | 24 Volts | 32 Volts |
| PT -7 | PT-24-8W | PT-32 -25W |
| PT-14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24-45U | |
| PT-80 | " nowrap> PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. | ||
Specifications
| 12 volt models | PT-7 | PT-14W | PT-25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Input Amps at Full Load | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| Rating P.F. | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum output amplifiers | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T- 7 |
| Ref. Housing size. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; Lbs./Kg. | 3.2/1.5 | 8/4 | 8.2/4 | 12/6 | 15.2/7 |
| Optional temperature. Model of sensor | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote panel template | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | Yes | Yes | Yes |
| Ref. output indicator | M-1 | M-3 | M-3 | M- 3 | M-3 |
| Compliance Ref. | CG, CE | CG, CE | CG | CG, CE | CE |
.7
p>| 24 volt models | PT-24-8W | PT- 24-13W | PT-24-20U | PT-24- 45U | PT-24-60W | PT-24-95U |
| VAC input (50-60 Hz.) | 85-264 | 90-132 or | 85-135 or | 90-264 | 207-253 | 90-264 |
| Input Amps at Full Load | ||||||
| @ 115 VAC | 2.8 | 6.5 | 8.5 | 12 | NA | 26 |
| @ 230 VAC | 1.4 | 4 | 4.3 | 7 | 13 | 14 |
| P.F. Note | .93@230V | .7 | .95@230V | .7 | .95@230V | |
| Maximum Output Amps | 8 | 13 | 20 | 45 | 60 | 95 |
| Output banks | 3 | 3 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 16-80 | 26-130 | 40-200 | 90-450 | 120-600 | 180-950 |
| Temp . of operation. | T-2 | T-3 | T-5 | T-8 | T-6 | T-8 |
| Case size Ref. | A-2 | A-2 | A-3 | A-5 | A-6 | A-6 |
| Weight; Lbs./Kg. | 8/4 | 8.2/ 4 | 12/6 | 12.2/6 | 24.1/11 | 24.5/11 |
| Tem sensor modeloptional temperature | TCS-12/24 | TCS-12/ 24 | TCS-12/24 | TCS-12/24 | TP | TCS-12/24 |
| Remote Panel Model | RP | RP | RP | RP | N/A | RP |
| Equalizer option | Yes | Yes | Yes | Yes | No | Yes |
| Ref. output indicator | M-3 | M-3 | M-3 | M-3 | M -2 | M-3 |
| Conformity Ref. | CG, CE | CG | CG, CE | EN, CE | EN, CE | EN, CE |
| 32 volt model | PT-32-25W |
| VAC input (50-60 Hz.) | 104-126 |
| Full Load Input Currents | |
| @115 VAC | 15 |
| @230 VAC | N/A |
| P.F. Note | .7 |
| Maximum Amplifier Output | 25 |
| Output banks | 3 |
| Battery Capacity (amp-hours) | 50-250 |
| Operating temp. | T-6 |
| Case size ref. | A-4 |
| Weight; Lbs./Kg. | 12.2/6 |
| Optional temperature sensor model | TP |
| Remote panel template | N/A |
| Equalizer option | No |
| Ref. output indicator. | M-2 |
| Conformity Ref. | EN, CE |
Case Size
| Inches | Centimeters | |||||
| Ref | H | W | D | H | W | D |
| A-1 | 10.5 | 5.0 | 2.8 | 26.7 | 12.7 | 7.1 |
| A-2 | 12.5 | 7.7 | 4.3 | 31.8 | 19.6 | 10.9 |
| A-3 | 13.85* | 9.5 | 4.8* | 35.2* | 24.1 | 12.2* |
| A-4 | 13.8A | 9.8 | 5A | 35A | 24.9 | 12.7A |
| A-5 | 14.8B | 9.6 | 5.6B | 37.6B | 24.4 | 14.2B |
| A-6 | 17.5C | 12 | 7.2C | 44.5C | 30.5 | 18.3C |
| * Add 0.75" (1.9 cm) to the height and 1.35" (3.4 cm) to the depth | ||||||
Temperature Evaluation references:
| T-1 | -10°C to +45°C; linear derating from 100% at 0°C to 80% at -10°C |
| T- 2 | -10°C to +60°C Linear derating from 100% to 40;°C at 60% at 60°C |
| T-3 | -10° C to +60°C 100% linear derating at 50°C to 60; % @ 60°C |
| T-4 | -10°C to +60 °C; Linear derating from 100% at 40°C to 60% at 60°C |
| T-5 | -40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C |
| T-6 | -20°C to +50°C; Full output |
| T-7 | -20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C |
| T-8 | -20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C |
Output Indicator References
| M-1 | Total output ammeter |
| M-2 | Charge/L.E.D. Float |
| M-3 | Total output ammeter and charger status LEDs/alarms |
Conformity references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2-29
CE bears the CE mark
* Many other safety and EMC compliances may also apply. Contact factory for additional compliance
iInformation is required.
Rated output voltages. at freeze/flood switch settings
(Without temperature compensation option installed or at 22.2°C (72°F) with temperature compensation option
installed.)
| | 12 Volt Models | 24 Volt Models | 32 Volt Model | |||
| Load | Float | Load | Float | Load | Float | |
| Parameter | @ 50% load | @ 0.5 amp load | @ 50% load | @ 0 load, 5 amp | @ 50% load | @ 0.5 amps charging |
| Gel-Cell | 14.0 VDC | 13.6 VDC | 28.0 VDC | 27 .2 VDC | 37.3 VDC | 36.2 VDC |
| Flooded/AGM | 14.2 VDC | 13.4 VDC | 28.4 VDC | 26.8 VDC | 37.8 VDC | 35.7 VDC |
Three-stage intelligent charger stage Now the three-stage intelligent battery charging technology is suitable for different power levels, allowing you to choose the right size, function and...
ID PRODUCT: 1001198
SKU: NVN-1001198
CSKU: CWR-1001198
REWRITE: 1012309-newmar-pt40u-12v-40amp-charger -115-230V input
MPN: PT40U
UPC: 00729198613860
ASIN: B00F158TNE
WSKU: NEWPT40U
SSKU: NMR-PT-40U
KSKU: NMRPT40U
GSKU:
MSKU:
LSKU:
NAME : Newmar PT40U 12v 40AMP Charger 115/230V Input
NAME_EX:
PTITLE: Newmar PT40U 12v 40AMP Charger 115/230V Input
TYPE: Electric | Battery Chargers
SELLER: NewMar
Sports
Newmar Phase III Charger 40A-12V (PT-40U)
Category Amazon: Sports
Gtags:
GSpecs:
Newmar PT40U 12V 40A Charger 115/230V Input Product Description
40A Phase Three Battery Charger SeriesThe "smart" charger for almost any applicationPhase three "smart" battery charging technology lets you select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage independing on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT40U Attributes- Number of banks: 3
- Application: Flooded, Gel, AGM
- Output Voltage: 12 Volts
- Input Voltage : 90 to 264 volts
- Ampere rating: 40 Amp load
- Universality: Fully universal
- Length (IN): 14.1 inches
- Width (IN): 9-1/2 inches
- Height (IN): 4 inch
- Intelligent circuitry allows three-stage charging: bulk, absorption, float.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- Current limitation: prevents damage caused by overvoltage.charging.
- Charger status is clearly displayed with an optional LED, ammeter or remote panel.
- Use as a power supply; can power non-battery loads in-line.
- Optional drip shield and marinized internal circuitry.
- Many safety and EMC compliance standards
- Limited warranty two years parts and labor.
Three-stage "smart" chargers
Three-stage "smart" battery charging technology is now available in a wide range of power levels, allowing you to saltget the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector adjusts output voltage to accommodate gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum strengthto corrosion.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers battery system ratings from 14 to 950 amp-hours
-
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote control panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and ECE compliance two years parts and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT- 14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24- 45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Specifications detailed below. | ||
Specifications
| 12 volt models | PT-7 | PT-14W | PT- 25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88 -132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Input Amps at Full Load | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| P.F. Note | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum output amplifiers | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T-7 |
| Ref. case size | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; /Kg. | 3.2/1.5 | 8/ 4 | 8.2/4 | 12/6 | 15.2/7 |
| Optional temperature sensor model | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote Panel Model | N/A | RP | RP | RP | RP |
| Equalizer option | No | ||||
