Newmar PT-80 battery charger Automotive/RV

PT-80 Battery Charger

Newmar's Phase Three series battery chargers use "smart" battery charging technology for 12-volt to 12-volt systems. onboard marine applications including workboats, military vessels, commercial vessels. ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a durable white powder coat finish, and theInternal circuits are polyurethane coated for maximum corrosion resistance.

Features:

12 volt model
"Smart" circuitry allows for three-stage charging: bulk, absorption and float
Gel/Flooded Lead Acid/AGM battery type switch selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with durable white powder coat finish, optional anti-drip screenn and marinized internal circuits
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and l Power supply

Specifications:

VAC input (50-60 Hz.): 90-264
Full load input current: @ 115 VAC: 12, @ 230 VAC: 7
Power factor: 0.95 at 230 V or 0.98 at 115 V
Maximum output amps: 80
Output banks: 3
Battery capacity (amp-hours): 160-800
Temp. Nominal Part Number: T-7
Case Size Reference: A-5
Case Size (H x W x D): 16.8C x 9.6 x 6, 1C inches (42.7C x 24.4 x 15.5C centimeters) *Note: With Dripshield installed, add 1" (2.54 cm) to height and 0.5" (1.27 cm) to depth
Weight Lbs./Kg: 15.2/7
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Equalizer Option: Yes
Output Meter Reference: M-3
Compliance reference: CE

Temperature references:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 80% at 60 degrees C

Rated output voltage at Freeze/Flood switch settings (without compensation temperature):

Gel-Cell: 14.0 VDC charging at 50% load and 13.6 VDC floating at 0.5 A load
Flooded/AGM: 14.2 VDC load at 50% load and 13.4 VDC float at 0.5 A load

Compliance references:

CG: USCG CFR 183.410 (ignition protected)
CE: bears the CE mark
ABS: the series PT complies with SVR 2009 4-8-3/5.9, Under 90 Meter Rules 2006 4-6-4/7.19 and HSNC 2007 4. -8-3/5.13

Options :

Remote panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual reset of charger three-stage charging cycle With 25 feet of cable. Panel Dimensions: 3″ H x 4.75″ W)
Temperature Compensation Sensor, Model TCS 12/24, for use with all. models except PT 7 (-5 mV per cell degrees C, 25' cable (40' cable optional)

This product cannot be returned to the point of purchase Please contact the manufacturer directly if you have any problems or concerns.

PRODUCT ID: 102336
SKU: NVN-102336
CSKU: CWR-.
REWRITE: 113447-newmar-pt-80-battery-charger
MPN: PT-80
UPC:
ASIN:
WSKU:
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-80 BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-80 Battery Charger
TYPE: Automotive/RV |os charger/inverter
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Product Description of the Newmar PT-80 Battery Charger

PT-80 Battery Charger

Newmar Phase Three Series battery chargers use "battery charging technology" intelligent" for 12 volt systems on board ships. applications including workboats, military vessels, commercial vessels and pleasure craft. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. This model is housed in a sturdy stainless steel housing with a thinDurable white powder coated finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

Model 12 volts
"Smart" circuitry provides three-stage charging: bulk, absorption and float.
Gel cell/flooded lead-acid/AGM battery type switch selects optimal charge/float voltages
Multiple isolated output banks; The ammeter indicates the total output current. (Except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (Except PT-7)
Current limitations prevent damage from overload
A clean, well-regulated output can be used as a power supply; can power loads directly without an in-line battery
Built to last: Rugged stainless steel housing with a white powder coat finishurable, an optional drip shield and marinized internal circuitry
Protection: Current limiting, thermal protection, forced air cooling, anti-drip protection
ABS type approval for battery charging and power supply

Specifications:

VAC input (50-60 Hz.) : 90-264
Full load input current: @ 115 VAC: 12, @ 230 VAC: 7
Power supply: 0.95 to 230 V or 0.98 to 115 V
Maximum output amps: 80
Output banks: 3
Battery capacity (amp-hours): 160 -800
Temp. of operation. Nominal Part Number: T-7
Case Size Reference: A-5
Case Size (H x W x D): 16.8C x 9.6 x 6, 1C inches (42.7C x 24.4 x 15.5C centimeters) *Note: With Dripshield installed, add 1" (2.54 cm) to height and 0.5" (1.27 cm) to depth
Weight Lbs./Kg: 15.2/7
Temp. faCultivative. Sensor Model: TCS-12/24
Remote Panel Model: RP
Equalization Option: Yes
Output Indicator Reference: M-3
Conformity reference: CE

Temperature references:

Temperature: - 10 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 80% at 60 degrees C

Rated output voltage at Gel/Flood switch settings (without temperature compensation):

Gel-Cell: 14.0 VDC charge at 50% load and 13.6 VDC float at 0.5A load
Flooded/AGM: 14.2VDC load at 50% load and 13.4VDC floating at 0.5A load

Conformity references:

CG: USCG CFR 183.410 (protected against ignition)
CE: bears the CE mark
ABS: PT series complies with SVR 2009 4-8-3/5.9, under 90 meters Rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13

Options:

Remote panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Three-stage manual charging cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)
Temperature compensation sensor, model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25 ft cable (40 ft cable optional)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $650 when you purchase the crazy Newmar PT-80 Battery Charger only $1,779 from NVN Marine! same day before 3 p.m. Newmar PT-80 Battery Charger Technical Specifications

Type:	Automotive/RV Charger/Inverter Combos.
Supplier:	Newmar Power

Newmar PT-80 Battery Charger User ReviewsNewmar PT-80 Battery Charger Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & return policy refund here.