Newmar PT-24-8W battery charger Automotive/RV

PT-24-8W Battery Charger

"Smart" marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

24 volt model
"Smart" circuit allows three-stage charging: bulk, absorption, floating battery
Flooded gel cell/lead acid battery/AGM battery switch type selects optimal charge/float voltages
Multiple isolated output banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limitation, thermal protection, forced air cooling, anti-drip protection
Install jointlynction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 85 - 264
Input Amps at Full Load Load: At 115 VAC: 2.8 , at 230 VAC: 1.4
Power factor: 0.98 at 115 V and 0.93 at 230 V
Maximum output amps: 8
Output banks: 3
Battery capacity (amp hours): 16 – 80
Temp. of operation. Nominal number: T-1
Case size reference: A-1
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Cond ReferenceFormity: CG, CE, ABS

Temperature Rating References:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 40 degrees C to 60% at 60 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Charge at 50% load and 27.2 VDC floating at 0.5 A load
Flooded/AGM: 28.4 VDC at 50% load and 26.8 VDC floating at 0.5 A load

Compliance References:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (Protected against ignition)
EN : EN 60335-1
CE: bears the CE marking
ABS: the PT series complies with SVR 2009 4-8 -3/5.9, Under 90 meter rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel , model RP, for use with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Three-stage manual charge cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4 .75″ L)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102332
SKU: NVN-102332
CSKU: CWR-102332
REWRITE : 113443 -newmar-pt-24-8w-battery-charger
MPN: PT-24-8W
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-24-8W BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-24-8W Battery Charger
TYPE: Automotive/RV | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Newmar PT-24-8W Battery Charger Product Description

PT-24-8W Battery Charger

"Smart" marine battery charging technology for 24 systems volts aboard workboats and military vessels, commercial vessels and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated tomaximum resistance to corrosion.

Features:

24 volt model
The "intelligent" circuit allows three-stage charging: bulk, absorption, float
GeL-Cell/Flooded Lead-Acid/AGM battery type switch selects optimal charge/flood voltages
Multiple banks isolated outputs; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limiting, thermal protection, forced air cooling, anti-drip protection
Install in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 85 - 264
Input Amps at Full Load Load: at 115 VAC: 2.8, at 230 VAC: 1.4
Power factor: 0.98 at 115 V and 0.93 at 230 V
Maximum output amps : 8
OrOutput banks: 3
Battery capacity (amp-hours): 16 – 80
Temp. of operation. Nominal number: T-1
Case size reference: A-1
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model:RP
Conformity reference: CG, CE, ABS

Temperature Evaluation references:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 40 degrees C to 60% at 60 degrees C

Voltage rated output at Gel/Inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Load at 50% load and 27.2 VDC floating at 0.5A load
Flooded/AGM: 28.4VDC at 50% load and 26.8VDC floating at 0.5A load

Conformity references:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (protected against inflammation)
EN: EN 60335-1
CE: bears the CE marking
ABS: the PT series complies with SVR 2009 standards 4-8- 3/5.9, under 90 meters rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3. /5.13.

Options:

Remote panel, RP model, touse with all models except PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Three-stage manual charge cycle reset. With 25 feet of cable . Panel Dimensions: 3″ H x 4.75″ W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $205 when you purchase the Newmar PT -24- 8W Battery Chargerfor only $564 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-24-8W Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-24-8W Battery Charger User ReviewsNewmar PT-24-8W Battery Charger Shipping & Returns

Fora detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.