Newmar PT-24-13W battery charger Automotive/RV

PT-24-13W Battery Charger

"Smart" marine battery charging technology for 24 volt systems aboard workboats, military vessels, commercial ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

24 volt model
"Smart" circuit allows three-stage charging: bulk, absorption, floating battery
Flooded Gel Cell/Lead Acid Battery/AGM Battery Switch Type Senses Optimal Charging/Float Voltages
Multiple Isolated Output Banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limiting, thermal protection, forced air cooling, anti-drip protection
Install inconjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 90 – 132, 180 – 264
Full Load Input Currents: At 115 VAC: 6.5, at 230 VAC: 4
Power Factor: 0.7
Maximum Output Amps: 13
Output Banks: 3
li>
Battery capacity (amp-hours): 26 – 130
Temp. of operation. Nominal number: T-2
Case size reference: A-1
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Compliance Reference: CG,ABS

Rated temperature references:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Load @ 50% load and 27.2 VDC float at 0.5 A load
Flooded/AGM: 28.4 VDC load at 50% load and 26.8 VDC float at 0.5 A load

Compliance References:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (Protected against ignition)
EN: EN 60335-1
CE: CE marked
ABS: The PT series complies with SVR 2009 4-8- 3/5.9, Under 90 meter rules 2006 4 -6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Remote panel, RP model, for use with all sa modelsuf PT-24-20U, PT-24-60 and PT-32-25 (LEDs indicate charger output stage. Three-stage manual charging cycle reset. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 102328
SKU: NVN-102328
CSKU: CWR-102328
REWRITE : 113439 -newmar-pt-24-13w-battery-charger
MPN: PT-24-13W
UPC:
ASIN:
WSKU:
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT24-13W BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-24-13W Battery Charger
TYPE: Automotive/RV | Charger/InverterCombos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags :

GSpecs:

Newmar PT-24-13W Battery Charger Product Description

PT-24-13W Battery Charger

"Smart" marine battery charging technology for 24 systems volts aboard workboats and military vessels, commercial vessels and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is coated in polyurethane.for maximum corrosion resistance.

Features:

24 volt model
The "smart" circuit allows three-stage charging: bulk, absorption, float
Gel cell/flooded lead-acid/AGM battery type switch selects optimal charge/flood voltages
Multiple isolated output banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limitation, thermal protection, forced air cooling, protectionanti-drip
Install in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC input (50-60 Hz.): 90 – 132, 180 – 264
Full Load Input Currents: at 115 VAC: 6.5, at 230 VAC: 4
Power Factor: 0.7
Maximum Output Amplifications: 13
Output Banks: 3
Battery capacity (amp hours): 26 – 130
Temp. of operation. Nominal number: T-2
Case size reference: A-1
Case size (H x W x D): 11.2A x 7.7 x 4, 75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A, add 1.1" (2.8 cm) to height and 0.92" (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: RP
Compliance reference: CG, ABS

Rated temperature references:

Temperature: -10 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at the settings of the gel/inode switch (without temperature compensation):

Gel-Cell: 28.0 VDC Load @ 50% load and 27.2 VDC float at 27.2 VDC load 0.5 A
Flooded/AGM: 28.4 VDC load at 50% load and 26.8 VDC float at 0.5 A load

Conformity references:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (protection against ignition)
EN: EN 60335-1
CE: bears the CE mark
ABS: the PT series complies with SVR 2009 standards 4-8- 3/5.9, under 90 meter rules 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

Options:

Distant panelant, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual reset of charge cycle in three steps. With 25 feet of cable. Panel Dimensions: 3″ H x 4.75″ W)

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Save $242 when you purchase the Newmar PT -24- 13W Battery Chargerfor only $667 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-24-13W Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power

Newmar PT-24-13W Battery Charger User ReviewsNewmar PT-24-13W Ex Battery ChargerShipping & Return

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.

/p>