Newmar PT-24-20U battery charger Automotive/RV

PT-24-20U Battery Charging

"Smart" marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial ships and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

24 volt model
"Smart" circuit allows three-stage charging: bulk, absorption, floating battery
Gel cell battery/flooded lead acid battery/AGM switch type selects optimum charge/float voltages
Multiple isolated output banks; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limitation, thermal protection, forced air cooling, anti-drip protection
Install in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 85 – 135, 170 – 270
Full Load Input Currents: At 115 VAC: 6.8, at 230 VAC: 4.3
Power Factor: 0.7
Maximum Output Amps: 20
Output Banks: 3
Battery capacity (amp-hours): 40–200
Temp. of operation. Rating Reference: T-3
Case Size Reference: A-2
Case Size (H x W x D): 13.85B x 9.5 x 4 .8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B, add 0.75" (1.9 cm) to height and 1.35" (3.4 cm) at depth
Weight Lbs./Kg: 12/6
Temp. optional. Sensor Model: TCS-12/24
Remote Panel Model: NA
Compliance Reference: CG, ABS

Rated temperature references:

Temperature: -20 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation) :

Gel-Cell: 28.0 VDC Load @ 50% load and 27.2 VDC float at 0.5 A load
Flooded/AGM: 28.4 VDC load at 50% load and 26.8 VDC float at 0.5 A load

Compliance References:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (Protected against ignition)
EN : EN 60335-1
CE: bears the CE marking
ABS: the PT series complies with SVR 2009 4-8-3 /5.9, rules for less than 90 meters 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

This product cannot be returned to the original point of purchase. . Please contact directlycontact the manufacturer in the event of a problem or concern.

PRODUCT ID: 102329
SKU: NVN-102329
CSKU: CWR-102329
REWRITE: 113440 -newmar-pt-24-20u-battery-charger
MPN: PT-24-20U
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NEWMAR PT-24-20U BATTERY CHARGER
NAME_EX:
PTITLE: Newmar PT-24-20U Battery Charger
TYPE: Automotive/RV | Charger/Inverter Combos
SELLER: Newmar Power
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Newmar PT-24-20U Battery Charger Product Description

PT-24-20U Battery Charger

"Smart" marine battery charging technology for 24 systems volts aboard workboats and military vessels, commercial vessels and pleasure boats. This charger interacts with batteries, providing an optimal three-stage charging process for rapid recovery and conditioning, maximizing performance and extending battery life.

A selector switch adjusts the voltage of outlet to fit gel cell flooded lead. -Types of acid or AGM batteries. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated tomaximum resistance to corrosion.

Features:

24 volt model
The "intelligent" circuit allows three-stage charging: bulk, absorption, float
EL-cell/lead-acid/AGM battery type switch selects optimal charge/flood voltages
Multiple banks of isolated outputs; ammeter indicates total output current
Optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage due to overload overload
Use as power supply; can power loads without an in-line battery
Built to last: Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry
Protection: current limiting, thermal protection, forced air cooling, anti-drip protection
Ininstall in conjunction with PT-MCU for additional control and monitoring
ABS type approval for battery charging and power supply

Specifications:

VAC Input (50-60 Hz.): 85 – 135, 170 – 270
Full Load Input Currents: at 115 VAC: 6.8, at 230 VAC: 4.3
Power Factor: 0.7
Maximum Output Currents: 20
Output Banks: 3
Battery capacity (amp-hours): 40 to 200
Temp. of operation. Rating Reference: T-3
Case Size Reference: A-2
Case Size (H x W x D): 13.85B x 9.5 x 4 .8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B, add 0.75" (1.9 cm) to height and 1.35" (3.4 cm) at depth
Weight Lbs./Kg: 12/6
Temp. optional. Sensor model: TCS-12/24
Remote panel model: NA
Part number de compliance: CG, ABS

Rated temperature references:

Temperature: -20 degrees C to +60 degrees C
Linear reduction from 100% at 50 degrees C to 60% at 60 degrees C

Rated output voltage at gel/inode switch settings (without temperature compensation):

Gel-Cell: 28.0 VDC Load @ 50% load and 27.2 VDC float at 0.5 A load
Flooded/AGM: 28.4 VDC load at 50% load and 26.8 VDC float at 0.5 A load

References compliance:

UL: UL 1950 (according to DNB report)
CG: USCG CFR 183.410 (protected against ignition)
EN: EN 60335-1
CE: bears the CE Marking
ABS: the PT series complies with SVR 2009 rules 4-8-3/5.9, lower rules at 90 meters 2006 4-6-4/7.19 and HSNC 2007 4-8-3/5.13.

This product cannot be returned to the original point of purchase. VePlease contact the manufacturer directly if you have any problems or concerns.

Save $374 when you purchase the Newmar PT -24- 20U Battery Chargerfor only $1,030 from NVN Marine! Same day dispatch before 3 p.m. Newmar PT-24-20U Battery Charger Technical Specifications

Type:	Automotive/RV \| Charger/Inverter Combos
Vendor:	Newmar Power
Weight:	14.3 lbs

Newmar PT-24-20U Battery Charger Reviews usersNewmar PT-24-20U Battery Charger Shipping & Returns

Shipping Weight:	14.3 lbs
Box sizes:	(h) x (l) x (w)
Cubic feet:	0

For detailed shipping policy, please seeour shipping policy and you will find our Return and Refund Policy here.