Newmar PT-24-20U 24V 20A Charger 115/230V Input Electrical
20A Phase Three Series Battery Charger, 24V DC, White Finish. The "smart" charger for almost all applications. Phase Three's "Smart" battery charging technology allows you to select the size, features and flexibility you need for virtually any application, from small pleasure boats to large cruise ships, work boats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient temperature of the batteries. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT2420U Attributes- Number of banks: 3
- Application: Flooded, Gel, AGM
- Output voltage: 24 Volts
- Input voltage: 115 to 230 volts
- Rated current: 20 amp load
- Universality: Completely universal
- Length (IN): 13.85 inches
- Width (IN): 9-1/2 inches
- Height (IN): 5 inches
- Intelligent circuitry allows charging in three stages: bulk, absorption, floating.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- Current limiting - prevents damage from overcharging.
- Charger status is clearly displayed with optional LED, ammeter or remote panel.
- Use as a power supply; can power loads without an in-line battery.
- Optional drip guard and marinized internal circuitry.
- Extensive safety and EMC compliance
- Tw limitedo Warranty one year on parts and labor
Three-stage "smart" chargers
Stage three "smart" battery charging technology is now available in a wide range of power levels, allowing you to select the size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise boats, workboats and others commercial ships. These chargers interact with the batteries to subject them to the processoptimal three-stage charging that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector switch adjusts the output voltage to adapt to freezing - Cell/Flooded Lead Acid/AGM Battery Types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers battery system ratings from 14 to 950 amp hours
-
The battery type switchGel cell/flooded lead-acid/AGM series selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Robust stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and EMC systems Compliances Two-year warranty parts and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT-14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24-45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. | ||
Specifications
3.2/1.5
| 12 volt models | PT-7 | PT-14W | PT-25W | PT-40W | PT -80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Full Load Input Amps | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| P.F. p> | >.65 | .93@230V | .7 | .7 | .95@230V |
| Intensities of maximum output | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. | T-1 | T-2 | T-4 | T-5 | T-7 |
| Case size Ref. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; Lbs./Kg. | 8/4 | 8.2/4 | 12/6 | 15.2/7 | |
| Optional temperature sensor model | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote Panel Model | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | Yes | Yes | Yes |
| Output indicator ref. | M-1 | M-3 | M-3 | M-3 | M-3 |
| Compliance Ref. | CG, CE | CG, CE | CG | CG, CE | CE |
p>
| 24 Volt Models | PT-24-8W | PT-24- 13W | PT-24-20U | PT-24-45U | PT-24-60W | PT-24-95U |
| VAC input (50-60 Hz.) | 85-264 | 90- 132 or | 85-135 or | 90-264 | 207-253 | 90 -264 |
| Input Amps at Full Load | ||||||
| @ 115 VAC | 2.8 | 6.5 | 8.5 | 12 | NA | 26 |
| @ 230 VAC | 1.4 | 4 | 4.3 | 7 | 13 | 14 |
| PF index | .93@230V | .7 | .7 | .95@230V | .7 | .95@230V |
| Maximum output amplifiers | 8 | 13 | 20 | 45 | 60 | 95 |
| Output banks | 3 | 3 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 16-80 | 26-130 | 40-200 | 90-450 | 120-600 | 180-950 |
| Operating temp. | T-2 | T-3 | T-5 | T-8 | T-6 | T-8 |
| Case Size Ref. | A-2 | A -2 | A-3 | A-5 | A-6 | A-6 |
| Weight; Lbs./Kg. | 8/4 | 8.2/4 | 12/6 | 12.2/6 | 24.1/11 | 24.5/11 |
| Optional temperature sensor model | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 | TP | TCS-12/24 |
| Remote Panel Model | RP | RP | RP | RP | N/A | RP |
| Equalizer option | Yes | Yes | Yes | Yes | No | Yes |
| Ref. output indicator | M-3 | M-3 | M-3 | M-3 | M-2 | M-3 |
| Compliance Ref. | CG, CE | CG | CG, CE | EN, CE | EN, CE | EN, CE |
.7
Battery capacity (amp-hours)
| 32 volt model | PT-32-25W |
| VAC input (50-60 Hz.) | 104-126 |
| Full Load Amps Input | |
| @ 115 VAC | 15 |
| @230 VAC | N/A |
| Note P.F. | |
| Maximum output amplifiers | 25 |
| Output banks | 3 |
| 50-250 | |
| Temp. of operation. | T-6 |
| Case size Ref. | A-4 |
| Weight; Lbs./Kg. | 12.2/6 |
| Optional temperature sensor model | TP |
| Remote panel template | N/A |
| Equalizer option | No |
| Output indicator ref. | M-2 |
| Compliance Ref. | EN, CE |
Case Size
| Inches | Centimeters | |||||
| Ref | H | W | D | H | W | D |
| A-1 | 10.5 | 5.0 | 2.8 | 26.7 | 12.7 | 7.1 |
| A-2 | 12.5 | 7.7 | 4.3 | 31.8 | 19.6 | 10.9 |
| A-3 | 13.85* | 9, 5 | 4.8* | 35.2* | 24.1 | 12.2* |
| A-4 | 13.8A | 9.8 | 5A | 35A | 24.9 | 12.7A |
| A-5 | 14.8B | 9.6 | 5.6B | 37.6B | 24.4 | 14.2B |
| A- 6 | 17.5C | 12 | 7.2C | 44.5C | 30.5 | 18.3C |
| * Add 0.75" (1.9 cm) to the height and 1.35" (3.4 cm) to the depth | ||||||
Temperature classification references:
| T -1 | -10°C to +45°C; Linear derating from 100% at 0°C to 80% at -10°C |
| T-2 | -10°C to +60°C; 100% linear derating at 40°C at60% at 60°C |
| T-3 | -10°C to + 60°C; Linear derating from 100% at 50°C to 60% at 60°C |
| T-4 | -10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C |
| T-5 | -40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C |
| T-6 | -20°C to +50°C; Full output |
| T-7 | -20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C |
| T-8 | -20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C |
Output Indicator References
| M-1 | Total output ammeter |
| M-2 | Charge/L.E.D. Float |
| M-3 | Total output ammeter and charger status LEDs/alarms |
Conformity references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2-29
CE bears the CE mark
* Many other safety and EMC compliances may also apply Contact i factory for further compliance
Information is required.
Rated output voltages. at gel/inode switch settings
(without temperature compensation option installed or at 22.2°C (72°F) with temperature compensation
option installed.)
| | 12 volt models | 24 volt models | 32 volt model | |||
| Load | Float | Load | Float | Load | Floating | |
| Settings | @ 50% load | @ 0.5 amp load | @ 50% load | @ 0.5 amp load | @ 50% load | @ 0.5 amp load |
| Gel-Cell | 14.0 VDC | 13.6 VDC | 28.0 VDC | 27.2 VDC | 37.3 VDC | 36.2 VDC |
| Flooded/AGM | 14.2 VDC | 13.4 VDC | 28.4 VDC | 26.8 VDC | 37.8 VDC | 35.7 VDC |
Now the technology third stage "smart" battery charging can be used at different power levels, allowing you to choose the size, function and flexibility you need...
PRODUCT ID: 1001192
SKU: NVN-1001192
CSKU: CWR-1001192
REWRITE: 1012303-newmar-pt-24-20u-24v-20a-charger-115-230v-input
MPN: PT24-20U
UPC: 00728120478461
ASIN: B0094DW5AC
WSKU: NEWPT2420U
br>SSKU: NMR-PT-24-20U
KSKU: NMRPT2420U
GSKU:
MSKU:
LSKU:
NAME: Newmar PT-24-20U 24V 20A Charger 115/230V Input
NAME_EX:
PTITLE: Newmar PT-24-20U 24v 20ACharger 115/230V Input
TYPE: Electric | Battery Chargers
SELLER: NewMar
Personal Computer
Newmar PT-24-20U Charger 24 V 20 A Input 115/230 V
Category Amazon: Personal computer
Gtags:
GSpecs:
Newmar PT-24-20U 24V 20A Charger 115/230V Input Product Description
20A Phase Three Series Battery Charger, 24VDC, White FinishThe "smart" charger for almost any applicationBattery charging technology "Smart" Phase Three allows you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the outputtie for ideal voltage depending on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder coat finish, and internal circuitry is polyurethane coated for maximum corrosion resistance.
NewMar PT2420U Attributes- Number of Banks: 3
- Application: Flooded , Gel, AGM
- Output voltage: 24 Volt
- Input voltage: 115 to 230 volts
- Ampere rating: 20 Amp load
- Universality: Fully universal
- Length (IN): 13.85 inches
- Width (IN): 9-1/2 inches
- Height (IN): 5 inches
- Intelligent circuitry allows three-stage charging: bulk, absorption, float.
- Multiple isolated output banks; Ammeter indicates total output current.
- Optional sensor adjusts output voltage based on battery temperature.
- Current Limit - prevents damage from to overload.
- Charger status is clearly displayed with an optional LED, ammeter or remote panel.
- Use as a power supply; can power non-battery loads in-line.
- Optional drip shield and marinized internal circuitry.
- Many safety and EMC compliance standards
- Limited warranty two years parts and labor.
Three-stage "smart" chargers
Three-stage "smart" battery charging technology is now available in a wide range of power levels, allowing you toto select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector Adjusts output voltage to fit gel-cell/flood-lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum resistance tocorrosion.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, floating.
-
A wide range of models covers battery system ratings from 14 to 950 amp-hours
-
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to prevent damage due to overload.
-
The status of the charger is clearly displayed with an LED. and/or indicator buzzers or optional remote panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
-
Extensive safety and ECE compliance two years parts and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT- 14W | PT-24-13W | |
| PT-25W | PT-24-20U | |
| PT-40U | PT-24-45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. | ||
Specifications
85-264
T-7
| 12 volt models | PT-7 | PT-14W | PT-25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 90-132 or | 85-135 or | 90-264 | |
| Full Load Input Amps | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| P.F. Note | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum Output Amps | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50- 250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | |
| Case size Ref. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; Lbs./Kg. | 3.2/1.5 | 8/4 | 8.2/4 | 12/6 | 15.2/7 |
| Temperature sensor model optional | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote Panel Model | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | |||
