Newmar PT-24-45U 24V 45A Charger 115/230V Input Electrical

Phase Three Series 45 Amp Battery Charger, 24 VDCThe "smart" charger for almost any applicationPhase Three "Smart" battery charging technology lets you select the size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All modsThey are housed in a rugged stainless steel housing with a choice of natural or durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance. NewMar PT2445U Attributes

Number of Banks: 3
Application: AGM/Flooded/Gel Batteries
Output Voltage: 24 Volts
Input Voltage: 90 to 264 Volts
Ampere Rating: 45 Amps Load
Universality: Completely Universal
Length (IN): 14.8 inches
Width ( IN): 9.6 inches
Height (IN): 5.6 inches

NewMar PT2445U Features and Benefits

Intelligent circuit allows charging in three stages: -bulk, absorption, float.
Multiple isolated output banks; Ammeter indicates total output current.
Optional sensor adjusts output voltage based on battery temperature.
Current Limit - emfishing damage due to overcharging.
Charger status is clearly displayed with LED, ammeter or remote panel
Use as power supply; can power loads without an in-line battery.
Drip shield and optional marinized internal circuitry.
Numerous safety and EMC compliance standards
Two years for parts and labor warranty

Three-stage "smart" chargers

Three-stage "smart" battery charging technology is now available in a wide range of power levels, allowing you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for rapid recharging.faster recovery and ideal conditioning, maximizing battery performance and extending battery life.

A selector switch adjusts the output voltage to suit gel-cell/lead-cell battery types- flooded acid/AGM. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.ance.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amp-hours
The gel/lead cell battery type switch -acid inwaved/AGM selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and EMC complianceDouble years of guarantees and labor guarantee

Models

12 Volts	24 Volts	32 Volts
PT-7	PT-24-8W	PT- 32-25W
PT -14W	PT-24-13W
PT- 25W	PT-24-20U
PT-40U	PT-24-45U
PT-80	PT-24-60W
	PT-24-95U
Specifications detailed below .

Specifications

12 volt models	PT-7	PT-14W	PT-25W	PT-40W	PT-80
VAC input (50-60 Hz. )	88-132 or 176 -264	85 -264	90-132 or 180-264	85-135 or 170-270	90-264
Full Load Input Amps
@ 115 VAC	2	2.8	6.5	8.5	12
@ 230 VAC	1	1.4	4	4.3	7
Note P.F.	>.65	.93@230V .98@115V	. 7	.7	.95@230V .98 @115V
Maximum output amplifiers	7	14	25	40	80
Output banks	2	3	3	3	3
Battery capacity (amp-hours)	14-70	28-140	50-250	80-400	160-800
Temp. of operation. Nominal reference	T-1	T -2	T-4	T-5	T-7
Case size Ref.	A-1	A-2	A-2	A-3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/7
Optional temperature sensor model	N /A	TCS-12 /24	TCS-12/24	TCS-12/24	TCS-12/24
Remote panel template	N/A	RP	RP	RP	RP
Equalizer option	No	Yes	Yes	Yes	Yes
Ref. inoutput indicator	M-1	M-3	M-3	M-3	M-3
Ref. of conformity.	CG, CE	CG, CE	CG	CG, CE	CE

85-135 or
170-270

TCS-12/24

24 Volt Models	PT-24-8W	PT -24-13W	PT-24-20U	PT- 24 -45U	PT-24-60W	PT-24- 95U
VAC input (50-60 Hz.)	85-264	90-132 or 180-264	90-264	207-253	90-264
Full Load Input Amps
@ 115 VAC	2.8	6.5	8.5	12	NA	26
@ 230 VAC	1.4	4	4.3	7	13	14
P.F. Note	.93@230V .98@115V	.7	.7	.95@230V . 98@115V	.7	.95@230V .98@115V
Maximum Output Amps	8	13	20	45	60	95
Output banks	3	3	3	3	3	3
Battery capacity (amp-hours)	16-80	26-130	40-200	90-450	120-600	180-950
Temp. Scoring reference	T-2	T-3	T-5	T-8	T-6	T-8
Case Size Ref.	A-2	A-2	A-3	A-5	A-6	A- 6
Weight; Lbs./Kg.	8/4	8.2/ 4	12/6	12.2/6	24.1/11	24.5/11
Optional temperature sensor model	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24	TP
Remote Panel Model	RP	RP	RP	RP	N/A	RP
Equalizer option	Yes	Yes	Yes	Yes	No	Yes
Ref. output indicator	M-3	M-3	M-3	M-3	M-2	M-3
Conformity Ref.	CG, CE	CG	CG, CE	EN, CE	EN, CE	EN, CE

32 volt model	PT-32-25W
VAC input (50-60 Hz.)	104-126
Amps full load input
@ 115 VAC	15
@ 230 VAC	N/A
P.F. Note	.7
Maximum Amplifier Output	25
Output banks	3
Battery Capacity (amp-hours)	50-250
Operating temp. Nominal reference	T-6
Case size ref.	A-4
Weight; "> 12.2/6
Optional temperature sensor model	TP
Remote panel template	N/A
Equalizer option	No
Ref. output indicator.	M-2
Conformity Ref.	EN, CE

Case Size

	Inches			Centimeters
Ref	H	W	D	H	W	D
A-1	10.5	5.0	2.8	26.7	12.7	7.1
A- 2	12.5	7.7	4.3	31.8	19.6	10.9
A-3	13.85*	9.5	4.8*	35.2*	24.1	12.2*
A- 4	13.8A	9.8	5A	35A	24.9	12.7A
A -5	14.8B	9.6	5.6B	37.6B	24.4	14.2B
A-6	17.5C	12	7.2C	44.5C	30.5	18.3C
* Add 0.75" (10.9 cm) to the height and 1.35" (3.4 cm ) to depth A Add 1.27" (3.2 cm) to height and 1.1" (2.8 cm) to depth B Add 1" (2.54 cm) to height and 0.5" (1.27 cm) depth C Add 2" (5.08 cm) height and 1" (2.54 cm) depth

Temperature assessment references:

T-1	-10°C to +45°C; Linear derating from 100% at 0°C to 80% at -10°C
T-2	-10°C to +60°C Linear derating from 100% to 40; °C at 60% at 60°C
T-3	-10°C to +60°C 100% linear derating at 50°C; at 60% at 60°C
T-4	-10°C at +60°C; Linear derating from 100% at 40°C to 60% at 60°C
T-5	-40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C
T-6	-20°C to +50°C; Full output
T-7	-20°C to +70°C; Linear derating from 100% at 45°C to 50% at 70°C
T-8	-20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C

Output Indicator References

M-1	Total output ammeter
M-2	Charge/L.E.D. Float
M-3	Total output ammeter and Charger Status LEDs/Alarms

Compliance References*
See matrix for applicable models
CG USCG CFR 183.410 (Ignition Protected )
EN EN 60335-1, EN 60335-2-29
CE is CE marked
* Many other safety and EMC compliances may also apply. Contact factory for additional compliance
information is required.

Rated output voltages at freeze/flood switch settings
(Without temperature compensation option installed or at 22.2 °C (72 °F) with the temperature compensation option
installed.)

	12 volt models		24 Volt Models		32 Volt Model
	Load	Float	Load	Float	Load	Floating
Parameter	@ 50% load	@ 0.5 amp load	@ 50% load	@ 0.5 amp load	@ 50% load	@ 0.5 amp load
Gel-Cell	14.0 V DC	13.6 VDC	28.0 VDC	27.2 VDC	37.3 VCC	36.2 VDC
Flooded/AGM	14.2 VDC	13.4 VDC	28.4 VDC	26.8 VDC	37.8 VDC	35.7 VDC

Three-stage "smart" charger stage Now the "three" "smart" battery charging technology is suitable for different power levels, allowing you to choose the right size, function and flexibility...
PRODUCT ID: 1001193
SKU: NVN-1001193
CSKU: CWR-1001193
REWRITE: 1012304-newmar-pt-24-45u-24v-45-amp-charger-115-230v
MPN: PT-24-45U
UPC: 00084282720764
ASIN: B00J9FJZPI
WSKU: NEWPT2445U
SSKU: NMR-PT-24-45U
KSKU: NMRPT2445U
GSKU:
MSKU:
LSKU:
NAME: Newmar PT-24-45U 24V 45A Charger 115/230 V input
NAME_EX:
PTITLE: Newmar PT-24-45U 24 V 45 A charger 115/230 V input
TYPE: Electric | Battery Chargers
SELLER: NewMar

Personal Computer
Newmar PT-24-45U Batt Chgr, Phase 3, 24V 45A, 3 Bank
br> Personal Computer
Gtags:

Car charger
24 volts

GSpecs:

Newmar PT-24-45U 24V 45A Battery Charger, 115/230V Input Product Description

45A Phase Three Series Battery Charger, 24VDCThe "Smart" Charger for Almost Any ApplicationBattery Charging Technology "Smart" phase three allows you to select the right size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life. A selector switch adjusts the output voltage to accommodate gel cell/flooded lead acid/AGM battery types. An optional temperature compensation sensor also adjusts the outputfor ideal voltage depending on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a choice of natural or durable white powder-coated finish, and the final circuit board is coated with polyurethane for maximum corrosion resistance.

NewMar PT2445U Attributes

Number of banks: 3
Application: AGM/Flooded/Gel Batteries
Output Voltage: 24 Volts
Operating Voltage input: 90 to 264 volts
Ampere rating: 45 Amp load
Universality: Fully universal
Length (IN): 14.8 inches
Width (IN): 9.6 inches
Height (IN): 5.6 inches

NewMar PT2445UFeatures and Benefits

Intelligent circuitry allows three-stage charging: bulk, absorption, float.
Multiple isolated output banks; Ammeter indicates total output current.
Optional sensor adjusts output voltage based on battery temperature.
Current Limiting-Prevents damage from to overload.
Charger status is clearly displayed with LED, ammeter or remote panel
Use as power supply; can power loads without an in-line battery.
Drip guard and optional marinized internal circuits.
Numerous safety and EMC compliance standards
Guaranteed two years parts and labor

Three-stage "smart" chargers

Stage three "smart" battery charging technology is now widely available range of power levels, allowing you to selecter the appropriate size and features. and the flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.

A selector adjusts the output voltage to accommodate gel-flooded lead-acid/AGM cell/battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and internal circuitry is polyurethane coated for maximum strengthand corrosion.

Features

The "smart" circuit allows charging in three stages: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amp-hours
The gel/lead cell battery type switch -acid flooded/AGM selects optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
The status of the charger is clearly displayed with an LED. and/or optional audible or rem indicatorsadditional panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and ECE compliance two years parts and labor

Models

12 Volts	24 Volts	32 Volts
PT-7	PT-24-8W	PT-32-25W
PT- 14W	PT-24-13W
PT-25W	PT-24-20U
PT-40U	PT-24 -45U
PT- 80	PT-24-60W
	PT-24-95U
Specifications detailed below.

Specifications

12 volt models	PT-7	PT-14W	PT -25W	PT-40W	PT-80
VAC input (50-60 Hz.)	88-132 or 176-264	85-264	90-132 or 180-264	85-135 or 170-270	90-264
Input Amps at Full Load
@ 115 VAC	2	2.8	6.5	8.5	12
@ 230 VAC	1	1.4	4	4.3	7
P.F. Note	>.65	.93@230V . 98@115V	.7	.7	.95@230V .98@115V
Maximum output amplifiers	7	14	25	40	80
Output Banks	2	3	3	3	3
Battery capacity (amp-hours)	14 -70	28-140	50-250	80-400	160-800
Temp. of operation. Nominal reference	T-1	T -2	T-4	T-5	T-7
Ref. case size	A-1	A-2	A-2	A- 3	A-5
Weight; Lbs./Kg.	3.2/1.5	8/4	8.2/4	12/6	15.2/7
Temperature sensor model optional	N/A	TCS-12/24	TCS-12/24	TCS-12/24	TCS-12/24
Remote Panel Model	N/A	RP	RP	RP	RP