Newmar PT-24-8W 24V 3-Bank 8A Charger Electrical
Three-stage "smart" chargersThree-stage "smart" battery charging technology is now available in a wide range of power levels, allowing you to select the size, features and flexibility you need you need for virtually any application, from small pleasure boats to large cruise ships, work boats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector adjusts output voltage to accommodate gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for ideal voltage based on changes in ambient battery temperature.eries. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
Features
"Smart" circuits allow three-stage charging: bulk, absorption, floating.
A wide range of models covers battery system ratings from 14 to 950 amps. hours
The gel cell/flooded lead acid/AGM battery type switch selects the optimal charge/float voltages.
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
Current limitation to prevent damage due to overload.
TheCharger status is clearly displayed with an LED. and/or optional audible indicators or remote panel.
Use as power supply; can power loads without a battery online.
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry.
Extensive safety and ECE compliance two years parts and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT-14W | PT-24- 13W | |
| PT-25W | PT-24 -20U | |
| PT-40U | PT-24-45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. |
Specifications
Ref. of conformity
| 12 volt models | PT-7 | PT-14W | PT-25W | PT -40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Full Load Input Amps | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 1.4 | 4 | 4.3 | 7 |
| P.F. Note | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum output amplifiers | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28-140 | 50-250 | 80-400 | 160-800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T-7 |
| Case size Ref. | A-1 | A-2 | A-2 | A-3 | A-5 |
| Weight; Lbs./Kg. | 3.2/1.5 | 8/4 | 8.2/4 | 12/6 | 15.2/7 |
| Temperature sensor model optionaln | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote Panel Model | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | Yes | Yes | Yes |
| Ref. output indicator. | M-1 | M-3 | M-3 | M-3 | M-3 |
| CG, CE | CG, CE | CG | CG, CE | CE |
| 24 volt Models | PT-24-8W | > PT-24- 13W | PT-24-20U | PT-24-45U | PT-24-60W | PT-24-95U |
| VAC input (50-60 Hz .) | 85-264 | 90-132 or | 85-135 or | 90-264 | 207-253 | 90-264 |
| Input Amps at Full Load | ||||||
| @ 115 VAC | 2.8 | 6.5 | 8.5 | 12 | NA | 26 |
| @ 230 VAC | 1.4 | 4 | 4.3 | 7 | 13 | 14 |
| P.F. Note | .93@230V | .7 | .7 | .95@230V | .7 | .95@230V |
| Maximum output amps | 8 | 13 | 20 | 45 | 60 | 95 |
| Output banks | 3 | 3 | 3 | 3 | 3 | 3 |
| Battery capacity ( amp-hours) | 16-80 | 26-130 | 40-200 | 90- 450 | 120-600 | 180-950 |
| Temp. of operationt. | T- 2 | T- 3 | T-5 | T-8 | T-6 | T-8 |
| Case size Ref. | A-2 | A-2 | A-3 | A-5 | A- 6 | A -6 |
| Weight; Lbs./Kg. | 8/4 | 8.2/ 4 | 12/6 | 12.2/6 | 24.1/11 | 24.5/11 |
| Optional temperature sensor model | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 | TP | TCS-12 / 24 |
| Remote panel template | RP | RP | RP | RP | N/A | RP |
| Equalizer option | Yes | Yes | Yes | Yes | No | Yes |
| Output indicator Ref. | M-3 | M-3 | M- 3 | M-3 | M-2 | M-3 |
| Ref. Conformity | CG, CE | CG | CG, CE | EN, CE | EN, CE | EN, CE |
| 32 volt model | PT-32-25W |
| VAC input (50-60 Hz.) | 104-126 |
| Full Load Input Amps | |
| @ 115 VAC | 15 |
| @ 230 VAC | N/A |
| P.F. Note | .7 |
| Maximum Amplifier Output | 25 |
| Output banks | 3 |
| Battery capacity (Amp- Hours) | 50-250 |
| Operating temperature | T-6 |
| Size of housing Ref. | A-4 |
| Weight; Lbs./Kg. | 12.2/6 |
| Optional temperature sensor model | TP |
| Remote panel template | N/A |
| Equalizer option | No |
| Ref. output indicator. | M-2 |
| Ref. Compliance | EN, CE |
Enclosure size
| Inches | Centimeters | |||||
| Ref | H | W | D | H | W | D |
| A-1 | 10.5 | 5.0 | 2.8 | 26.7 | 12.7 | 7.1 |
| A-2 | 12.5 | 7.7 | 4, 3 | 31.8 | 19.6 | 10.9 |
| A-3 | 13.85* | 9.5 | 4.8* | 35.2* | 24.1 | 12.2* |
| A-4 | 13.8A | 9.8 | 5A | 35A | 24.9 | 12.7A |
| A-5 | 14.8B | 9,6 | 5.6B | 37.6B | 24.4 | 14.2B |
| A-6 | 17.5C | 12 | 7.2C | 30.5 | 18.3C | |
| * Add 0.75" (1.9 cm) to the height and 1.35" (3.4 cm) to the depth |
Evaluation references temperature:
| T-1 | -10°C to +45°C; Linear derating from 100% at 0°C to 80% at -10°C |
| T-2 | -10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C |
| T-3 | -10°C to +60°C; Linear derating from 100% at 50°C to 60% at 60°C |
| T-4 | -10°C to +60°C; Linear derating from 100% at 40°C to 60% at 60°C |
| T-5 | -40°C to +60°C; Linear derating from 100% at 50°C to 75% at 60°C |
| T-6 | -20°C to +50°C; Full output |
| T-7 | -20°C to +70 °C; Linear derating from 100% at 45°C to 50% at 70°C |
| T-8 | -20°C to +70°C; Linear derating from 100% at 50°C to 50% at 70°C |
Output Indicator References
Total output ammeter
| M-1 | |
| M-2 | Charge/ Float L.E.D. |
| M-3 | Total output ammeter and charger status LEDs/alarms |
Compliance references*
See matrix for applicable models
CG USCG CFR 183.410 (Protected against ignition)
EN EN 60335-1, EN 60335-2-29
CE is CE marked
* Many other safety and EMC compliances may also apply. Contact the factory if additional compliance information is required.
Rated output voltages at freeze/flood switch settings
(without temperature compensation option installed or at 22.2°C (72 °F) with temperature
Optioncompensation installed.)
| | 12 volt models | 24 Volt Models | Model 32 Volts | |||
| Charge | Float | Load | Float | Load | Float | |
| Parameter | @ 50% charge | @ 0 charge, 5 A | @ 50% load | @ 0.5 amp load | at 50% load | at 0.5 amp load |
| Gel-Cell | 14.0 VDC | 13.6 VDC | 28.0 VCC | 27.2 VCC | 37.3 VDC | 36.2 VDC |
| Flooded/AGM | 14.2 VDC | 13.4 VDC | 28.4 VDC | 26.8 VDC | 37.8 VDC | 35.7 VDC |
The third stage battery charger series Now the third stage "smart" battery charging technology is suitable for different power levels, allowing you to choose the right size,...
PRODUCT ID: 1001195
SKU: NVN-1001195
CSKU: CWR-1001195
REWRITE: 1012306-newmar-pt-24-8w-24v-charger-3-bank-8
MPN: PT-24-8W
UPC:
ASIN: B00KOEMSDE
WSKU: NEWPT248W
SSKU:
NAME: Newmar PT-24-8W 24v Charger 3 Bank 8 Amp
PTITLE: Newmar PT-24-8W 24v Charger 3 Bank 8 Amp
TYPE: Electric -> Battery Chargers
SELLER: NewMar
Newmar PT-24-8W 24V Charger 3 Bank 8 Amp
ACategory mazon:
Gtags:
| 24 volts | |
| 8 mAh |
GSpecs:
Newmar PT-24-8W 24V, 3-Bank, 8A Charger Product Description Three-stage "smart" chargers
Stage three "smart" battery charging technology now available in a wide range of power levels, allowing you to select the size, features and flexibility you need for virtually any application, from small pleasure craft to large cruise ships, workboats and other commercial vessels. These chargers interact with the batteries to subject them to the optimal three-stage charging process that allows for faster recovery and ideal conditioning, maximizing battery performance and extending its life.
A selector adjusts output voltage to accommodate gel-cell/flooded lead-acid/AGM battery types. An optional temperature compensation sensor also adjusts the output for a teideal nsion depending on changes in ambient temperature of the batteries. All models are housed in a rugged stainless steel housing with a durable white powder coat finish, and the internal circuitry is polyurethane for maximum corrosion resistance.
Features
-
The "smart" circuit allows charging in three stages: bulk, absorption, float.
-
A wide range of models covers battery system ratings from 14 to 950 amp-hours
-
The gel/lead cell battery type switch acid flooded/AGM selects optimal charge/float voltages.
-
Multiple isolated output banks; The ammeter indicates the total output current. (except PT-7)
-
Optional sensor adjusts output voltage based on battery temperature. (except PT-7)
-
Current limitation to avoidr damage due to overcharging.
-
The status of the charger is clearly displayed with an LED. and/or optional audible indicators or remote panel.
-
Use as power supply; can power loads without a battery online.
-
Built to last? Rugged stainless steel housing with a durable white powder coat finish with an optional anti-drip shield and marinized internal circuitry. and labor
Models
| 12 Volts | 24 Volts | 32 Volts |
| PT-7 | PT-24-8W | PT-32-25W |
| PT-14W | PT-24-13W | |
| nowrap> PT- 25W | PT-24-20U | |
| PT-40U | PT-24- 45U | |
| PT-80 | PT-24-60W | |
| PT-24-95U | ||
| Detailed specifications below. |
Specifications
1.4
A-2
| 12 volt models | PT-7 | PT-14W | PT-25W | PT-40W | PT-80 |
| VAC input (50-60 Hz.) | 88-132 or | 85-264 | 90-132 or | 85-135 or | 90-264 |
| Full Load Input Amps | |||||
| @ 115 VAC | 2 | 2.8 | 6.5 | 8.5 | 12 |
| @ 230 VAC | 1 | 4 | 4.3 | 7 | |
| P.F. Note | >.65 | .93@230V | .7 | .7 | .95@230V |
| Maximum output amplifiers | 7 | 14 | 25 | 40 | 80 |
| Output banks | 2 | 3 | 3 | 3 | 3 |
| Battery capacity (amp-hours) | 14-70 | 28- 140 | 50-250 | 80-400 | 160 -800 |
| Temp. of operation. | T-1 | T -2 | T-4 | T-5 | T-7 |
| Case size Ref. | A-1 | A-2 | A-3 | A-5 | |
| Weight; Lbs./Kg. | 3.2/1.5 | 8/4 | 8.2/4 | 12/6 | 15.2/7 |
| Optional temperature sensor model | N/A | TCS-12/24 | TCS-12/24 | TCS-12/24 | TCS-12/24 |
| Remote panel template | N/A | RP | RP | RP | RP |
| Equalizer option | No | Yes | Yes | Yes | Yes |
| Ref. output indicator | M-1 | M-3 | K-3 | K-3 | M-3 |
| Ref. of conformity | CG, CE | CG, CE | CG | CG, CE | CE |
| 24 volt models | PT-24-8W | PT-24-13W | PT-24-20U | PT- 24-45U | PT-24-60W | PT-24-95U |
| VAC input (50-60 Hz.) | 85- 264 | 90-132 or | 85 -135 or | 90-264 | 207-253 | 90-264 |
| Full load input currents | ||||||
| @ 115 VAC | 2.8 | 6.5 | 8.5 | 12 | NA | 26 |
| @ 230 VAC | 1.4 | 4 | 4.3 | 7 | 13 | 14 |
| P.F. Note | .93@230V | .7 | .7 | .95@230V | .7 | .95@230V |
| Maximum Output Amps | 8 | 13 | 20 | 45 | 60 | 95 |
| Output banks | 3 | 3 | 3 | 3 | 3 | 3 |
| Pâtey Capacity (amp-hours) | 16-80 | 26- 130 | 40 -200 | 90-450 | 120-600 | 180-950 |
| Temp. of operation. |
